simoncs Posted October 26, 2011 Report Posted October 26, 2011 hi guys i am desperate to try the dt6 software, but can't find it anywhere. I have been through the links on this forum, but none seem to work. If someone has it, would the be kind enough to repost it for me?[-O< thanks Simon Quote
anu60 Posted October 27, 2011 Report Posted October 27, 2011 Friends, Here you go. http://www.ziddu.com/download/17036354/td6dt6.zip.html Please try it. I am using it and it is working perfectly indo37 and bonny 2 Quote
simoncs Posted October 28, 2011 Report Posted October 28, 2011 Friends, Here you go. http://www.ziddu.com/download/17036354/td6dt6.zip.html Please try it. I am using it and it is working perfectly thanks really appreciate it - will install it this w/e. i presume you are just using EOD data with it? i think it needs another component to work with realtime? Quote
anu60 Posted October 29, 2011 Report Posted October 29, 2011 It works on real time data also. I have subscription to 1 minute metastock data and they are updated in it automatically. Thanks Quote
simoncs Posted November 7, 2011 Report Posted November 7, 2011 Hi all Are all the scans working for you? I am using metatrader to create the EOD data, and have several files which i have managed to load to DT6. I have created a portfolio for these and can then see the charts correctly. Also the EOW scanner works ok, but none of the others. in fact in the dualtime frame and ROC scanners i can see my portfolios but when i select one i can't see the associated data files. Anyone know why this would be? thanks Simon Quote
fx9548 Posted November 7, 2011 Report Posted November 7, 2011 Hi everybody, You're doing a great job. I also have a problem with dt6.I installed the software. I couldn't use the key generator. I found the .dll file that it was needed and I paste it in the DT/bin folder. When I run the DT6 it is asking me for en esignal. I 'm answering yes and then it gives me this message. "Access violation at address 00628F39 in module 'DT6.exe.' Read of address 00000000" Please advice what did I do wrong. After that the software is running but without data. It's just empty. Please advice what to do or how to run the key injector.... I'm running the key injector but it's doing nothing. It doesn't give me an error too. Please advice.... Quote
⭐ sherbaaz Posted November 24, 2011 Report Posted November 24, 2011 It works on real time data also. I have subscription to 1 minute metastock data and they are updated in it automatically. Thanks Hi, Can you please tell me who is your data provider? help appreciated. regds, Quote
anu60 Posted November 24, 2011 Report Posted November 24, 2011 Hi, Can you please tell me who is your data provider? help appreciated. regds, I have subscription of xfeeds. They provide 1 minute real time data in metastock format. We can create 1 minute real time chart in dt6 with those data but we can not change them to 5 minute or any other higher time frame, this is the limitation with those data in dt6 though in metastock we can change the time frame of these data. ⭐ sherbaaz 1 Quote
⭐ FFRT Posted November 24, 2011 Report Posted November 24, 2011 S**** it, don't break ur head if there is no solution to it. Use Amibroker instead Quote
⭐ sherbaaz Posted November 25, 2011 Report Posted November 25, 2011 I have subscription of xfeeds. They provide 1 minute real time data in metastock format. We can create 1 minute real time chart in dt6 with those data but we can not change them to 5 minute or any other higher time frame, this is the limitation with those data in dt6 though in metastock we can change the time frame of these data. Thanks a lot for the information. Also you have solved my other query regarding real time. It will run real time only with base interval be it 5 or 1 min and we cannot change the time frame, with meastock data. How is the performance of the real time data in dynamic trader does it run smoothly without at hassle? help appreciated regds, Quote
⭐ sherbaaz Posted November 25, 2011 Report Posted November 25, 2011 Thanks a lot for the information. Also you have solved my other query regarding real time. It will run real time only with base interval be it 5 or 1 min and we cannot change the time frame, with meastock data. How is the performance of the real time data in dynamic trader does it run smoothly without at hassle? help appreciated regds, just to update real time data i tested worked like a charm in dynamic trader. only thing is one cannot change to time frame thanks Quote
anu60 Posted November 25, 2011 Report Posted November 25, 2011 just to update real time data i tested worked like a charm in dynamic trader. only thing is one cannot change to time frame thanks I am happy that I have been of some help to you. P.S. You can change the time frame of data in metastock. As i have perceived the xfeeds are about 5 to 10 seconds late than the actual real time quotes Quote
⭐ sherbaaz Posted November 25, 2011 Report Posted November 25, 2011 I am happy that I have been of some help to you. P.S. You can change the time frame of data in metastock. As i have perceived the xfeeds are about 5 to 10 seconds late than the actual real time quotes Hi, Problem is not with the RT data its something in DT as the same data works well in metastock without much delay as compare to DT. btw i am using real time data its base time is 5 minute. regds, Quote
fx9548 Posted November 25, 2011 Report Posted November 25, 2011 Hi there, I have propably a small problem with the dt 6. I set up the dt6 with the MettoDet indicator for metatrader so that i can have real time data on dt6. I get a message from dt log every 5 secs telling "Invalid bar request" Please advice what to do in order to have real chart on dt6. Now I have no charts for Eur_Usd. The only thing I have is the DT Log small screen every 10 or 15 secs telling me "invalid bar Request" Please advice.. Thanks a lot... Quote
paraplexus Posted November 28, 2011 Report Posted November 28, 2011 (edited) Hi all, i managed to install DT6 and get data from MT4, build portfolios, groups and workplaces. Where i need your help with are the scans. The only scan i get a result displayed with are the EOW scans. The "trade setup" and "alert scanner" just don't give any result, no matter which portfolio i chose. And for the "DT Dual Time Frame Momentum Reversal" scan and the "ROC AND DT Oscillator" scan, i get my portfolois listed, but no chart - thus the scan button is greyed out / not working. If any of you got these scans working, i'd be really happy if you could share how you did it - or at least point me in the right direction. P.S.: Did anybody share release 6.2.2. already? Edited November 28, 2011 by paraplexus Quote
zoom Posted December 1, 2011 Report Posted December 1, 2011 Supper Problem ! I have reinstalled the DT6 because i have problems with the ASCII setup and now Acces violation at adress 00801934 read of adress 000008.... Please help !!!!!!!!!!!!!!!!!!!! Quote
⭐ FFRT Posted December 2, 2011 Report Posted December 2, 2011 **** poorly cracked . i face same problem, earlier, all ymbol (securities) in my database use to show 3-4 duplicates....uninstalled.... Quote
paraplexus Posted December 4, 2011 Report Posted December 4, 2011 Hi all Are all the scans working for you? I am using metatrader to create the EOD data, and have several files which i have managed to load to DT6. I have created a portfolio for these and can then see the charts correctly. Also the EOW scanner works ok, but none of the others. in fact in the dualtime frame and ROC scanners i can see my portfolios but when i select one i can't see the associated data files. Anyone know why this would be? thanks Simon Simon, i face the same issues as you with the scans. Have you go them working meanwhile? If so, please let me know how you did it. P. Quote
braveheart2009 Posted December 31, 2011 Report Posted December 31, 2011 Hi can anyone confirm if this is still working? Do I need a data feed can anyone recommend a free one? Quote
⭐ noyp Posted December 31, 2011 Report Posted December 31, 2011 do anybody have a setup file for Dynamic trader 6.2.2.128 ? according to this post the old crack still works on this version http://www.speculationmasters.com/vb/elliott-waves-softwares/1476-dynamic-trade-version-6-2-2-128-a.html Quote
Darkman Posted December 31, 2011 Report Posted December 31, 2011 A more recent version of DT6, eg. 6.2.2.128 would be an outstanding share if someone has it. Thanks. -DM Quote
Captain Posted January 4, 2012 Report Posted January 4, 2012 I wonder if this DT could get real time data feed from MT4 using plug-in-script as Elwave does any advice ? Quote
Streebeck Posted January 4, 2012 Report Posted January 4, 2012 am I right, that the DT software is not even able to correctly adjust the candle size when the amount of bars is in-/decreased? ie the candles overlapp Quote
⭐ sherbaaz Posted January 14, 2012 Report Posted January 14, 2012 hi all, have been using dt6 since 1.2 mnths with metastock format data. I have not faced any problem. I have in my trading has tried many softwares and different approach but found Miner's approach and dt6 to be the best for me. It has not prop tools and all like aget but its great and very practical. Miner approach to ew along with dt has imporved my trading a lot. u need to put an effort to learn Miner's way of trading how to use dt6. Dont know how it works with ASCII format as never tried it. regds, Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.