shawnh

Dear OptionTrader, working downloads that you need are found in earlier Post #52 of this thread:
 
/forum/forex-forum/trading-platform/35172-/page4#post807419
 
Cheers
S

Thank you to all who contributed to the edu version of this Wave59 v2.33... but is anyone else having problems when trying to create a chart from IB live data? I am having a bugger of a time. One basic thing I am wondering about is - should I be launching History59 *BEFORE* launching Wave59? If I do, I get an error window saying simply "10061:". Or does Wave59 handle History59 automatically without the need to launch it manually?
 
Inside Wave59 2.33 for using IB, there are areas to set IB as the "data source" and also as the "Broker". I've tried setting just as data source and also as both data source & broker with still no success. Here is a rundown of what I did and experienced... maybe somebody else has had these problems also:
 
- So with IB TWS already running, when I first enter Wave59 2.33 without having set up anything, it says on lower left status bar "H59 Socket Error".
- I then proceed to choose data source IB with client ID 0.
- I then go to HELP|HISTORY59|RECONNECT, and I get an error window saying "10061: [10061] Connection refused".
- So anyway, I proceed and try to make a new chart (GCZ2-NYMEX-FUT), and after a long hang, it shows an error window:
"Out of memory".
- So I exit out of Wave59 and go back into it again - this time firstly setting Broker to IB and then also data source to IB.
- It still says "H59 Socket Error" at lower left status bar, but now says "IB Connected" next to that.
- I try again to create a new chart (GCZ2-NYMEX-FUT)... again hangs for several seconds, then OUT OF MEMORY error.
 
 
Does anyone have any suggestions or thoughts please? It would be so nice to get this working :-)
 
Thanks!
shawnh
 
 
 

Thank you to all who contributed to the edu version of this Wave59 v2.33... but is anyone else having problems when trying to create a chart from IB live data? I am having a bugger of a time. One basic thing I am wondering about is - should I be launching History59 *BEFORE* launching Wave59? If I do, I get an error window saying simply "10061:". Or does Wave59 handle History59 automatically without the need to launch it manually?
 
Inside Wave59 2.33 for using IB, there are areas to set IB as the "data source" and also as the "Broker". I've tried setting just as data source and also as both data source & broker with still no success. Here is a rundown of what I did and experienced... maybe somebody else has had these problems also:
 
- So with IB TWS already running, when I first enter Wave59 2.33 without having set up anything, it says on lower left status bar "H59 Socket Error".
- I then proceed to choose data source IB with client ID 0.
- I then go to HELP|HISTORY59|RECONNECT, and I get an error window saying "10061: [10061] Connection refused".
- So anyway, I proceed and try to make a new chart (GCZ2-NYMEX-FUT), and after a long hang, it shows an error window:
"Out of memory".
- So I exit out of Wave59 and go back into it again - this time firstly setting Broker to IB and then also data source to IB.
- It still says "H59 Socket Error" at lower left status bar, but now says "IB Connected" next to that.
- I try again to create a new chart (GCZ2-NYMEX-FUT)... again hangs for several seconds, then OUT OF MEMORY error.
 
 
Does anyone have any suggestions or thoughts please? It would be so nice to get this working :-)
 
Thanks!
shawnh
 
 
 

None so far to my knowledge.

try this hxxps://www.mediafire.com/file/kqm615vu9scb49q/MultiCharts+11.0+x32-x64+Build+15200-15201.rar/file

Multicharts 8 Working
 
https://www.mediafire.com/file/yhmbr0s137g7v8e/MC8.rar/file
 
Multicharts DT
 
https://www.mediafire.com/file/98ri1tjaf40qlwu/multichartsDT.exe/file
 
 

For the ones interested in advanced get I gathered everything I´ve got from various places. Also added some python code to download free EOD data already in ASCII format compatible with Aget data source.
Only uploaded version 7.5 and portable 8 because 9.1 version is less stable in my exprience and the only addon between version is template function easily solved using page and autopage fuction.
 
https://[email protected]/folder/PE4GVRqZ#m-Yme583SMsKBj0Mx-AnYA

here are the rest of the tapes, enjoy
 
https://[email protected]/file/zcdwnqv105qurfy/Sem2.rar/file
https://[email protected]/file/6awkmcaqazz7188/Sem3.rar/file
https://[email protected]/file/rwsudt4cnuxcfj6/Sem4.rar/file
https://[email protected]/file/w2x3votxqexbos0/Sem5.rar/file

Done! :)
 
Yloader V2.9.1.0 - 3/28/2009
 
http://www.multiupload.com/GTH6TF814T
 
Don't update it unless there is a "must have" feature in version 3, because V3 is not shareware - you have to pay.

i think lots of traders all round the world waiting for this........ enjoy the excellent piece of software motivewave 5.4
here is the link.....
 
 
http://www.mediafire.com/file/758127j2a27y12t/MTWave5_4_13.rar

For the serial use 1111-2222-3333-4444-5555-6666 and it worked for me

this file isnt safe
https://www.virustotal.com/#/file/a8c41b34b687ac5ed000ecb15efa3e38329463437932ec2db283d89354fa8f9f/detection
https://www.sendspace.com/file/5v99go

:D
 
Editor's site : https://majorleaguetrading.com/mltproducts/nadex-course/
 
All the stuff in a MEGA folder :
 
https://mega.nz/#F!rVcglIBL!UOfkoTtqNII479GuA08kUw
 
or
 
Mediafire links :
 
http://www.mediafire.com/file/4r2cxapezyeir7c/Trading+Live.zip
 
http://www.mediafire.com/file/cu69oikih8d7hhy/NADEX+INDICATORS.zip
 
http://www.mediafire.com/file/tn5tmv9gtnx4qzr/NMC.zip

 
*******************************************
The password is : bestblackhatforum.com
*******************************************

I use this. Its a very good software. And you receive a indicator that already plot the levels in MT4.

.............

You are welcome, glad to help. I am using 9.1 EOD Dashboard version found here:
 
hxxps://www.4shared.c0m/get/0fF8uIqH/Advanced_GET_91_EOD_Dashboard_.html

Hello guys, I've been playing around with Advanced GET 9.1 EOD Dashboard version, trying to get it working with intraday data. After some rough patches and trial and error, I think I have things working fairly smoothly. I'd like to share what I've learned with others who may be in the same boat.
I use the technique of getting real-time data from an MT4 demo... this method is explained in another thread. Since AG EOD can't accommodate the "time" field of a bar, the MT4 intraday data has to be converted to "pseudo" daily data via an MT4 indicator placed on the intraday charts. Works well, but I lamented the fact that once I viewed the data charted in AG, I could no longer see the correct date/time of a bar. So I did some modifcations of the original MT4 indicator to put the proper date/time stamp of each bar in the VOLUME field instead. So if you don't need the VOLUME in any of your analysis, this is for you.
Here is the modified indicator for MT4:
 
https://anonfile.com/f040Bfbebe/AgetDataDatestamp.rar
 
When placed on a MT4 chart, it will output an ascii file to your MT4 installation folder in the "Files" subfolder. Now, when you open up a chart in AG using this data (and select the "Volume" study), you see this:
 
https://anonfile.com/gf40Bcb9bf/ShowDatestamp.jpg
 
Way down there at the lower left will be the proper DateTime stamp of the bar your crosshair is placed over... instead of the Volume figure. I like to grab the upper border of the Volume study pane and drag it down so just the DateTime value shows. It seems to work pretty good, but alas, it suffers the same fate as all studies placed on AG charts once you close down AG and restart it - they disappear or are disabled. You'll notice that the Volume study is still there at the bottom, but scrolling the crosshairs won't change the value. Quick fix: just right click over the word VOLUME. click "Properties", then "Apply" and OK. It will come back to life. Easier than deleting the whole study and putting it back on.
 
At first I had AG on my Vista desktop and I struggled to try and get it working half-decently. Constant freeze-ups, very slow page loading, etc. I tried it instead on my older and slower XP laptop and it seems to work *much* better. And here is probably the most important thing I discovered to make closing/re-opening AG work quick and smooth - the power of the PAGE|NEW PAGE button! When you're in AG and working on a page of charts (I have 6 charts open in the one page I have - 3 AAPL and 3 SPY) and ready to exit and re-open, follow these exact steps (works for me!):
 
- Save your page using PAGE|SAVE PAGE (... or Save as)
- click PAGE|NEW PAGE to clear out the screen (*always* do this just before closing up AG!)
- Close up AG, when it asks "Save the current page", click NO. (you've already saved it)
 
To re-open AG, I have a small batch file already prepared that suppresses the loading of the eSignal module. This seems to save a lot of headaches and freeze-ups. Put the following in your batch file (ie. a .BAT file, and just place it on your desktop):
 
CD \
CD Program Files\Advanced GET EOD
start AdvancedGETEOD.exe /d
 
That's it. Launch that... AG will fire right up quickly to an empty screen, thanks to you doing the NEW PAGE thing prior to your last exiting. Go to PAGE|LOAD PAGE and load up your page and those charts should come right up pretty quickly.
 
Another small error I got en route to figuring stuff out was the one below:
 
https://anonfile.com/e749B7b5b3/AGerror.jpg
 
To solve that, I would open up my page of charts, then do a SAVE AS, saving them under a new page name. Then deleting the old page. That took care of it.
 
So I find now, finally, this works pretty good. Not perfect, but it's quite usable. Still remaining is the annoying thing of why the studies disappear off the charts everytime you shut down/restart. The drawn objects however - like the MOB and TJ's Ellipse remain.
 
Hope this helped someone...
 
Shawn

Hello guys, I've been playing around with Advanced GET 9.1 EOD Dashboard version, trying to get it working with intraday data. After some rough patches and trial and error, I think I have things working fairly smoothly. I'd like to share what I've learned with others who may be in the same boat.
I use the technique of getting real-time data from an MT4 demo... this method is explained in another thread. Since AG EOD can't accommodate the "time" field of a bar, the MT4 intraday data has to be converted to "pseudo" daily data via an MT4 indicator placed on the intraday charts. Works well, but I lamented the fact that once I viewed the data charted in AG, I could no longer see the correct date/time of a bar. So I did some modifcations of the original MT4 indicator to put the proper date/time stamp of each bar in the VOLUME field instead. So if you don't need the VOLUME in any of your analysis, this is for you.
Here is the modified indicator for MT4:
 
https://anonfile.com/f040Bfbebe/AgetDataDatestamp.rar
 
When placed on a MT4 chart, it will output an ascii file to your MT4 installation folder in the "Files" subfolder. Now, when you open up a chart in AG using this data (and select the "Volume" study), you see this:
 
https://anonfile.com/gf40Bcb9bf/ShowDatestamp.jpg
 
Way down there at the lower left will be the proper DateTime stamp of the bar your crosshair is placed over... instead of the Volume figure. I like to grab the upper border of the Volume study pane and drag it down so just the DateTime value shows. It seems to work pretty good, but alas, it suffers the same fate as all studies placed on AG charts once you close down AG and restart it - they disappear or are disabled. You'll notice that the Volume study is still there at the bottom, but scrolling the crosshairs won't change the value. Quick fix: just right click over the word VOLUME. click "Properties", then "Apply" and OK. It will come back to life. Easier than deleting the whole study and putting it back on.
 
At first I had AG on my Vista desktop and I struggled to try and get it working half-decently. Constant freeze-ups, very slow page loading, etc. I tried it instead on my older and slower XP laptop and it seems to work *much* better. And here is probably the most important thing I discovered to make closing/re-opening AG work quick and smooth - the power of the PAGE|NEW PAGE button! When you're in AG and working on a page of charts (I have 6 charts open in the one page I have - 3 AAPL and 3 SPY) and ready to exit and re-open, follow these exact steps (works for me!):
 
- Save your page using PAGE|SAVE PAGE (... or Save as)
- click PAGE|NEW PAGE to clear out the screen (*always* do this just before closing up AG!)
- Close up AG, when it asks "Save the current page", click NO. (you've already saved it)
 
To re-open AG, I have a small batch file already prepared that suppresses the loading of the eSignal module. This seems to save a lot of headaches and freeze-ups. Put the following in your batch file (ie. a .BAT file, and just place it on your desktop):
 
CD \
CD Program Files\Advanced GET EOD
start AdvancedGETEOD.exe /d
 
That's it. Launch that... AG will fire right up quickly to an empty screen, thanks to you doing the NEW PAGE thing prior to your last exiting. Go to PAGE|LOAD PAGE and load up your page and those charts should come right up pretty quickly.
 
Another small error I got en route to figuring stuff out was the one below:
 
https://anonfile.com/e749B7b5b3/AGerror.jpg
 
To solve that, I would open up my page of charts, then do a SAVE AS, saving them under a new page name. Then deleting the old page. That took care of it.
 
So I find now, finally, this works pretty good. Not perfect, but it's quite usable. Still remaining is the annoying thing of why the studies disappear off the charts everytime you shut down/restart. The drawn objects however - like the MOB and TJ's Ellipse remain.
 
Hope this helped someone...
 
Shawn

Hi Mike, I made a thread last year on how to get real-time data from MT4 into Advanced Get End-of-Day. It should help you:
 
http://indo-investasi.com/showthread.php/28575-Some-tips-for-new-users-of-Advanced-GET-EOD-version?highlight=advanced+get
 
Myself, I use this to get real-time 15 minute intraday bars of US stock data into my Advanced Get.

Starting with version 5 MotiveWave stopped releasing a 32 bit version.
 
I found the same results as the others did. Crack for 5.3.14 works fine with 5.4.1 install and runs for 20 minutes, then the program locks up and you have to restart program. 5.3.14 crack does not work at all with latest install files of 5.4.3 and 5.4.4. Program stalls at startup and program won't load at all.

OK guys here it is: https://ufile.io/u2012
Go get it fast, will be removed soon.
 
If someone manages to fix this, please let us know and upload a fixed version.
 
Zinfandel

here are the rest of the tapes
enjoy
 
Sem2 https://www.forexupload.com/6iu
Sem3 https://www.forexupload.com/6iv
Sem4 https://www.forexupload.com/6iw
Sem5 https://www.forexupload.com/6ix

Hi shawnh
 
I hope this is what you looking for tape one of five
 
https://www.forexupload.com/6is

I found some more infos (videos and pdf files):
 
https://www.sendspace.com/file/kvm4an
https://www.sendspace.com/file/2clb7s
 
Sixer

Check this link for some youtube videos:
 

 
Sixer
 
Edit:
Did you check the stuff provided from Andrey ?
http://www.traders-software.com/screenshots/Advanced%20Get%2012.0.3598%20x64%20(Dec%202014)%20for%20Any%20eSignal%20Account%20(esignal.com)/Books/
 
Have a look at the Twitter account of Tom Russo too and check which features of the AGet platform he is using: