β option trader Posted September 9, 2024 Report Posted September 9, 2024 not allowedΒ 4 shared.pls lookintothe attached picture Quote
ngoc76.nminh Posted September 12, 2024 Report Posted September 12, 2024 On 9/6/2024 at 10:58 AM, rtt518 said: it is great! I got the Β optuma 2.2Β working with offline now Could you guide detail install for first time optuma? Quote
Puzzle Posted September 12, 2024 Report Posted September 12, 2024 On 9/9/2024 at 1:52 PM, option trader said: not allowedΒ 4 shared.pls lookintothe attached picture Β Β Try this: (pass: 123) https://mega.nz/file/OwNVCKiJ#6PjnMdThB-g6ZCn9nzyUZJ_-sC7OExdCV3dxAMCXjqc Β β option trader, Bigthanks2u and dangvo 3 Quote
ngoc76.nminh Posted September 13, 2024 Report Posted September 13, 2024 On 2/24/2022 at 12:01 PM, mvssunny said: Β Run EMU, Log in online mode first and then use offline mode. excuse me, What is EMU?Β Quote
nefre821 Posted September 13, 2024 Report Posted September 13, 2024 15 hours ago, ngoc76.nminh said: excuse me, What is EMU?Β emu lator..... Quote
abdi Posted September 29, 2024 Report Posted September 29, 2024 is this verision of optuma 32bit or 64 bit?? Β Quote
Hakim Posted November 25, 2024 Report Posted November 25, 2024 i had problem with lower timeframe like H and minute timeframe how can i deal with it Quote
kris00l Posted January 11 Report Posted January 11 (edited) On 2/15/2023 at 10:34 PM, cotton1234 said: Hello, Β Following are the steps to install the same successfully. Β 1) Disable the internet on the machine 2) change the host file as documented in the read me. 3) Install the setup which is included in the zip file. Dont Download the new one. 4) Follow the readme file instruction in step 2. Use can use %appdata% on the command promt to go the folder mentioned. 5) Follow the readme file instruction in step 3. 6) Now check if any port 80 is in use. (netstat -nao | find ":80") 7) if nothing comes in the previous output, then you are good otherwise you need to kill the pid (taskkill /PID <Output in the last column of the previous command> /F) π Once nothing comes in step 6 we are good to go next 9) Run VFA Tools and click start 10) Check (netstat -nao | find ":80") . YOu will have 1 process now. 11) Enable the internet. 12) Start the optuma and use the login as mentioned in readme file instruction. Β Thanks Β Β Β I had installed and ran the optuma 1.6 before i stumbled upon above post. I then manually, cleaned up folders/Reg etc and uninstalled. Then reinstalled following above steps. However, I still get violation issue. Interesting thing is, optuma still remembers username and password how? Any other suggestions? Thanks! Β Edited January 11 by kris00l Quote
astrologer87 Posted January 17 Report Posted January 17 Friends, can you take a video of the installation process or take a picture? I can't install it. Thank you very much. Quote
β RichardGere Posted January 17 Report Posted January 17 (edited) Sorry I couldn't find my old files to verify if my install was ok. Will check again later. Edited January 17 by RichardGere astrologer87 1 Quote
astrologer87 Posted January 17 Report Posted January 17 1. copy file host to folder C:\Windows\System32\drivers\etc 2. copy 2 file cart.dat, res.datΒ to folder C:\Users\xxxxxx\AppData\Local\Optuma Β (xxxxxx is user on your computer) 3. copy MACM.dll to folder Β C:\Program Files\Optuma 4. run VFA tools and click start 5. login or work offline with user:JohnDhi5 pass:jodh4307 Enjoy! Jupi_T Β I followed this instruction to do version 1.6 but it gives an error Quote
astrologer87 Posted January 17 Report Posted January 17 If possible, please help me with an installation tutorial video or log into my system with the Any Deck program. astrologer87 1 Quote
astrologer87 Posted January 17 Report Posted January 17 41 minutes ago, Puzzle said: Ψ¨ΩΩ Ϊ©ΩΎΫ Ϊ©Ψ±Ψ―Ω Β exachang dataΒ I don't understand I installed version 2.2 and 1.6 in two different folders In which folder should I copy the opcm file? astrologer87 1 Quote
β RichardGere Posted January 17 Report Posted January 17 Puzzle post does not appear to refer to installation but after installation and how data can be shared between 1.6 and 2.2. OPCM.dll file is to be copied into the program folder for version 2.2 only Anyway, suggest you solve the problem of installing and running 1.6 first. Hopefully, your computer does not belong to the rare group where it just wouldn't run Optuma properly. I can give suggestions here are there. astrologer87 1 Quote
astrologer87 Posted January 17 Report Posted January 17 Thank you very much for your response. I have deleted and reinstalled version 1.6 several times, but I still have the same problem. I have deleted all the folders related to this software. Can Windows 11 be a problem with Windows 11? Quote
β RichardGere Posted January 17 Report Posted January 17 Send me all the files that you used to install and I will install it on my 3rd computer. Just want to make sure you have the right files.Β astrologer87 1 Quote
astrologer87 Posted January 18 Report Posted January 18 Hello After installing and deleting version 1.6 several times, I was able to install version 1.6 and the program opened Now for version 2.2 Should I install version 2.2 in a separate folder? And copy that opcm file to the installation location How do I share these two folders together? I downloaded the same versions that were in this thread https://mega.nz/file/OwNVCKiJ#6PjnMdThB-g6ZCn9nzyUZJ_-sC7OExdCV3dxAMCXjqc Quote
β RichardGere Posted January 18 Report Posted January 18 (edited) That is good. Go ahead to install 2.2 into another program folder and copy OPCM.dll file to the program folder of 2.2. (There is no need copy any res.dat and cert.dat files to document folder since they were already installed with 1.6. Installing 2.2 will not remove them) Now you can login OFFLINE mode in 2.2 using the same ID and Password of 1.6. To share files, use 1.6 to download chart and save into a workbook. Then close 1.6 and open 2.2. Open workbook that you have saved previously. BUT you can actually run 1.6 and 2.2 simultaneously although most people says it can't be done. To run the two programs simultaneously (run 1.6 and 2.2 without having to close any of them) Here is the cut and paste from my post at TSRh (Run the emulator for 1.6 first) Click either the 1.6 or 2.2 icon repeatedly and quickly for about 6 to 8 clicks. Let's say start with 1.6 icon first. You should see one or two splash screens declaring the message "Optuma is already running. Would you like to close the other process and continue?" Click Yes to all splash screens. After this, you should see at least two login screens for version 1.6. Close all but leave one open. (If you don't see at least 2 login screens, then close everything and redo the clicking again) Now you can click the version 2.2 icon and the version 2.2 login screen will appear. You can now proceed to login either online or offline with the respective versions. To share static data (not realtime data) from version 1.6 to version 2.2 Save your workspace in version 1.6 after opening a chart. In version 2.2 open the same workspace. You will have what version 1.6 has saved. (reminder : In version 2.2, do not save workspace, just load only) I don't use the program but just tested it. Hope this work around will be helpful for others. Edited January 18 by RichardGere Quote
astrologer87 Posted January 18 Report Posted January 18 2 hours ago, RichardGere said: Go ahead to install 2.2 into another program folder and copy OPCM.dll file to the program folder of 2.2. (There is no need copy any res.dat and cert.dat files to document folder since they were already installed with 1.6. Installing 2.2 will not remove them) Now you can login OFFLINE mode in 2.2 using the same ID and Password of 1.6. To share files, use 1.6 to download chart and save into a workbook. Then close 1.6 and open 2.2. Open workbook that you have saved previously. BUT you can actually run 1.6 and 2.2 simultaneously although most people says it can't be done. To run the two programs simultaneously (run 1.6 and 2.2 without having to close any of them) Here is the cut and paste from my post at TSRh (Run the emulator for 1.6 first) Click either the 1.6 or 2.2 icon repeatedly and quickly for about 6 to 8 clicks. Let's say start with 1.6 icon first. You should see one or two splash screens declaring the message "Optuma is already running. Would you like to close the other process and continue?" Click Yes to all splash screens. After this, you should see at least two login screens for version 1.6. Close all but leave one open. (If you don't see at least 2 login screens, then close everything and redo the clicking again) Now you can click the version 2.2 icon and the version 2.2 login screen will appear. You can now proceed to login either online or offline with the respective versions. To share static data (not realtime data) from version 1.6 to version 2.2 Save your workspace in version 1.6 after opening a chart. In version 2.2 open the same workspace. You will have what version 1.6 has saved. (reminder : In version 2.2, do not save workspace, just load only) I don't use the program but just tested it. Hope this work around will be helpful for others. Hello, good morning I really thank you, dear friend, for your efforts and kindness. You helped me, my problem was solved. Thank you very much, my love. I hope you are always healthy.π Quote
astrologer87 Posted February 8 Report Posted February 8 (edited) Hello friends, good time I had a question I know it's not related to this topic But I would appreciate your help I am looking for the PLACIDUS 7.0 Astrology Computer Program Do you have a place to find it (a site or a topic where I can download the cracked version Also the ZET9 Geo 2.63 software Edited February 8 by dima4000 quetzal 1 Quote
drpav Posted March 13 Report Posted March 13 Hi, When I try to run the 2.2 version, it says "Cannot create the target folder". Can anyone help? why am I getting this error? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.