⭐ FFRT Posted March 12, 2018 Report Share Posted March 12, 2018 (edited) password 4indoinvesasi https://anonfile.com/U2NfM5d3b6/ret.rar special thanks suresh and shawnh Many thanks @candyman, @suresh, @shawnh WECS LT000-20 pack has file from LT.000 TO LT.020 EXCEPT LT.001 can someone make it complete ? or is it okay not to have 001? Edited March 12, 2018 by FFRT Shenong 1 Quote Link to comment Share on other sites More sharing options...
⭐ shawnh Posted March 12, 2018 Report Share Posted March 12, 2018 You are right FFRT, I'm not sure if it's needed or not, but best to have it anyway. Here it is: https://anonfile.com/d6rdNedbb1/LT001.rar Shawn yandaPaur, Shenong, homey and 5 others 8 Quote Link to comment Share on other sites More sharing options...
⭐ FFRT Posted March 12, 2018 Report Share Posted March 12, 2018 Not able to load end of day metastock data, i think, there is way to do it,....i selected Metastock 8 but fail to load / locate directory where file are stored on local machine. P.S.: SOftware crashes in between. Quote Link to comment Share on other sites More sharing options...
Sixer Posted March 12, 2018 Report Share Posted March 12, 2018 FFRt, did you choose for "Load Options": "Load all" ? Metastock 8 is ok. Sixer ⭐ FFRT 1 Quote Link to comment Share on other sites More sharing options...
raviniceravi Posted March 12, 2018 Report Share Posted March 12, 2018 Just load a chart up Ravi, then choose in the dropdown window at the far right, an appropriate powerpack with a 2007 date (WECS indicator only works with 2007 powerpacks). Then click INDICATORS from top menu, then MANAGE, then ADD NEW, then select WAVE END CONFIRMATION SIGNALS and OK, Then OK again on next window, then finally OK again on the "Manage indicators" window. WECS indicator should appear at bottom of chart. Cheers Shawn shawn i am all done but nothing more than line appear rather then wecs signal.....which powerpack and how it will define in my pc or in software please define....and help me to load indicator please Quote Link to comment Share on other sites More sharing options...
candyman Posted March 12, 2018 Report Share Posted March 12, 2018 You need to set the colors of the indicator when setting it up. Only works with 2007 packs. Once applied you can save the color scheme as default Shenong and strat57 2 Quote Link to comment Share on other sites More sharing options...
raviniceravi Posted March 13, 2018 Report Share Posted March 13, 2018 where i get 2007 packs.......if you have please share candyman Quote Link to comment Share on other sites More sharing options...
⭐ shawnh Posted March 13, 2018 Report Share Posted March 13, 2018 Ravi, I had the same problem when I first tried it - "Where is the WECS indicator?", I wondered. In the right-most dropdown window up top, you MUST specify a powerpack that has "2007" in it... else the WECS indi won't display. In your installation folder ("C:Program Files\Refined Elliott Trader"), there should be files named LT.000 through LT.020. These are the powerpack files. Shawn Shenong and candyman 2 Quote Link to comment Share on other sites More sharing options...
⭐ FFRT Posted March 13, 2018 Report Share Posted March 13, 2018 FFRt, did you choose for "Load Options": "Load all" ? Metastock 8 is ok. Sixer Yes, but it does not search native drive to look metastock directory, nor does it allow to add folder manually....i think, as usual, am ignoring some basic :( Quote Link to comment Share on other sites More sharing options...
raviniceravi Posted March 13, 2018 Report Share Posted March 13, 2018 Ravi, I had the same problem when I first tried it - "Where is the WECS indicator?", I wondered. In the right-most dropdown window up top, you MUST specify a powerpack that has "2007" in it... else the WECS indi won't display. In your installation folder ("C:Program Files\Refined Elliott Trader"), there should be files named LT.000 through LT.020. These are the powerpack files. Shawn in upper right case top right no powerpack symbol shown but both LT.000 through LT.020 file found in ;):\Program Files (x86)\Refined Elliott Trader\LT000-020 Quote Link to comment Share on other sites More sharing options...
raviniceravi Posted March 13, 2018 Report Share Posted March 13, 2018 Ravi, I had the same problem when I first tried it - "Where is the WECS indicator?", I wondered. In the right-most dropdown window up top, you MUST specify a powerpack that has "2007" in it... else the WECS indi won't display. In your installation folder ("C:Program Files\Refined Elliott Trader"), there should be files named LT.000 through LT.020. These are the powerpack files. Shawn and also new error coming image here h**ps%3A//www.photobox.co.uk/my/photo/full?photo_id=500652325558 Quote Link to comment Share on other sites More sharing options...
⭐ shawnh Posted March 18, 2018 Report Share Posted March 18, 2018 Ravi, I can't view that screenshot of the error - it just goes to main photoshop site. Anyway, I think you should do a full UNinstall of whatever version of RET you have there. It's ONLY Candyman's version from post #67 of this thread that will show the WECS indicator. After that new installation I think you will still be missing powerpack file LT.001, so download it here and copy it over to the RET installation folder: https://anonfile.com/d6rdNedbb1/LT001.rar Cheers Shawn Quote Link to comment Share on other sites More sharing options...
Sixer Posted March 19, 2018 Report Share Posted March 19, 2018 shawnh, my opinon after testing: The WECS indicator will bring no benefit with regard to the preferred count. Sixer Quote Link to comment Share on other sites More sharing options...
⭐ shawnh Posted March 20, 2018 Report Share Posted March 20, 2018 I've just been looking at it briefly on US stocks daily charts, and I find that it might act quite nicely as a confirming indicator. I wouldn't trade it all by itself, of course. I need to look at it more closely, but currently I'm busy on something else. Cheers Shawn Quote Link to comment Share on other sites More sharing options...
yandaPaur Posted April 5, 2018 Report Share Posted April 5, 2018 (edited) Hi guys, I have 2 questions: Question 1: Once I open RET, I get an "Unexpected error; quitting" error : After clicking the "OK" button of this error, RET fortunately doesn't quit. :) The program looks like this: https://imgur.com/a/rr7lL If I open a pre-installed sample chart, for example, AAPL (year 1995 - 2000), and then start an Elliott Wave analysis, it looks like this: https://imgur.com/a/3nFwR I guess everything looks and works normally, despite the UE error that pops up when I start RET, right? :) Could anyone confirm? And did anyone else get this error? Btw, I changed my Windows 7 Pro 64-bit system to English + United States just to run RET, otherwise the program tells you to do that when you start the program. -- Question 2: Where do I get Forex data for RET? You guys mentioned that MetaStock data is compatible with RET - does that mean that you guys all pay for MetaStock data? Or is there a pirate data server somewhere? Or can I download MetaStock data for free somewhere? :) If I can't get Forex data for free for RET, I'm happy with any data (futures, stocks, commodities) because that would still allow me to practice Elliott Wave counting with the help of RET. --- Info about my RET version: RET 1.7.11 by candyman (RETV1711FULL.exe) -patched using patch.exe -all 21 LT files (LT000 - LT020) are in the RET folder as suggested by shawnh and others in this thread Info about my system: -changed my region & language settings to English / United States (required by RET) -Windows 7 Pro 64-bit -16 GB Ram, i7 CPU -GeForce Graphics card Edited April 5, 2018 by yandaPaur Quote Link to comment Share on other sites More sharing options...
candyman Posted April 5, 2018 Report Share Posted April 5, 2018 use exporthistory indi for mt4 it will update (not realtime) at any interval you wish yandaPaur 1 Quote Link to comment Share on other sites More sharing options...
⭐ shawnh Posted April 5, 2018 Report Share Posted April 5, 2018 Hi yandaPaur, would you be able to open the ABOUT window (HELP | ABOUT) and post a screenshot of that? Something doesn't seem right with your installation. Your first screenshot shows you selected and used the "General Stocks" powerpack from the dropdown list at the upper right. I have all the powerpacks installed, and I don't have that one. The one I use (in order to get the WECS indicator to appear) is "USA Stocks 2007 (Large Cap)". Also, I never experienced that error window you get on startup. And also, you said "Btw, I changed my Windows 7 Pro 64-bit system to English + United States just to run RET, otherwise the program tells you to do that when you start the program". I installed mine on XP, it never gave me any warning about what OS to install on. Shawn Shenong and yandaPaur 2 Quote Link to comment Share on other sites More sharing options...
yandaPaur Posted April 5, 2018 Report Share Posted April 5, 2018 (edited) use exporthistory indi for mt4 it will update (not realtime) at any interval you wish Thank you for the hint and coding the patch for RET, candyman. :) I found the exporthistory indicator thread by hanover on FF: https://www.forexfactory.com/showthread.php?p=3106841#post3106841 His indicator outputs forex data to a .csv file. In his post, he posts the indicator for the first time - and also a sample data file (GBPCHF,D1.csv). I put hanover's sample file (GBPCHF,D1.csv) into the "Samples" folder of RET. I noticed that it's the only .csv file, as all the other pre-installed RET sample data files have the *.its file ending. I then tried to load hanover's GBPCHF,D1.csv file from within RET, but I can't be opened: When choosing "Files Only" as "Server", GBPCHF doesn't appear in the list of securities/instruments: https://i.imgur.com/QCHsVzL.png And when I choose "Yahoo CSV" as "Server" ( https://i.imgur.com/PjV3Edh.png ) and point to the .csv file and try to open it, an error message appears which says: "Cannot convert string 09-30-2009 into date using specified format: yyyymmdd" And after clicking "OK", another error: https://i.imgur.com/EBAP7H9.png Would it be possible for you or anyone else reading this to tell me how to get that .csv file to work with RET? :) Or generally how to get MT4 to work with RET, using exporthistory ? Would I have to change hanover's exporthistory indicator to use a different date format than yyyymmdd for it to work with RET? Hi yandaPaur, would you be able to open the ABOUT window (HELP | ABOUT) and post a screenshot of that? Something doesn't seem right with your installation. Your first screenshot shows you selected and used the "General Stocks" powerpack from the dropdown list at the upper right. I have all the powerpacks installed, and I don't have that one. The one I use (in order to get the WECS indicator to appear) is "USA Stocks 2007 (Large Cap)". Also, I never experienced that error window you get on startup. And also, you said "Btw, I changed my Windows 7 Pro 64-bit system to English + United States just to run RET, otherwise the program tells you to do that when you start the program". I installed mine on XP, it never gave me any warning about what OS to install on. Shawn Thank you for trying to help, shawnh, here's the screenshot of the "About" window: https://i.imgur.com/ha6OpBO.png Since you guys said WECS isn't really useful and I'm still dealing with the basic RET functions (e.g. organizing forex data to use with RET :) ), having WECS work is low priority. I just want to make sure my installation is ok. I used candyman's upload link of RET, btw: http://indo-investasi.com/showthread.php/4304-Refined-Elliot-Trade?p=443178&viewfull=1#post443178 Btw: as mentioned, that OS language error doesn't appear anymore after changing my system region & language settings to English / USA. It's only the Unexpected Error now. Edited April 5, 2018 by yandaPaur Quote Link to comment Share on other sites More sharing options...
⭐ shawnh Posted April 5, 2018 Report Share Posted April 5, 2018 Yanda, okay I guess your setup/installation is alright then. I uploaded a file with some stuff for you to help you out - some screenshots of various settings and a little MT4 thing I doctored up for myself for outputting data for RET use. http://anonfile.com/Fdg3b2e2b9/screenshots.rar For importing data files into RET, I think they have to have a PRN file extension. Add the "Outputdata" indicator to your MT4 and then slap it on any chart you want (intraday, daily, etc). It will export data files with a PRN file extension. It always writes them to the MQL4/Files folder of your MetaTrader installation - this can't be changed I don't think. Take a look at screenshots metatrader1.png and metatrader2.png for the settings for this indicator. For setting up your RET to import these files, use the settings on screenshot RET1.png. Then click the "Define ASCII" button there and use the settings shown on RET2.png. If you want end of day stock data to play around with (instead of forex), just download the very good and free YLOADER from www.yloader.com. Use the config settings in it as shown in yloader.png. Finally, I like to have the RET elliott wave analysis look like I have in screenshot RET3.png. To get that, just make sure the two buttons I have encircled in green are depressed. Cheers Shawn Shenong 1 Quote Link to comment Share on other sites More sharing options...
yandaPaur Posted April 5, 2018 Report Share Posted April 5, 2018 hey shawnh, Thank you so much for helping out and putting together these instructions and the package!! And of course organizing this marvelous piece of software with candyman. It's really unbelievable how everyone is helping one another in this thread. have a great evening :), yp Quote Link to comment Share on other sites More sharing options...
⭐ shawnh Posted April 6, 2018 Report Share Posted April 6, 2018 You're welcome! candyman 1 Quote Link to comment Share on other sites More sharing options...
timo Posted April 7, 2018 Report Share Posted April 7, 2018 I never tried Elliott waves. Is there any value in it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.