tradernate

She calls 2 types of trades: Aggressive and conservative. The aggressive seem to be an impulse elliott number 1 wave, which she does not takes but calls for the room. Note: she does not state that this is the case, but when I wave count I generally come up with the same thing. Her, conservative trades and an Elliott 3 wave, which she seems to hit about 80%. For a room she seems to be the best so far, that I have attended. You can be profitable but you have to have some experience trading, and understand what she is telling about the trades. She has never stated this, this is just my observation after 1 week taking the trial.

 

I did some testing today and this is what I have come up with her fib numbers. Entry chart based,

Uses a 1-2-3 pullback, entry bar and HTF (higher time frame) support. Fibs based on entry bar of the 2 bar of 1-2-3. Fib levels; 0 is base of entry bar, 100 is entry-to trade at bar close, Note-stop is at 0, minus 2/3 ticks. T1 (T=target)-176.4, T2-238.2, DZ1-(DZ=danger zone, where price is going into HTF probable support)-323.6, DZ2-417.6 She sells 60% of contracts at T1. Next week it will try to screen save some charts, and Record her for the 1st hour of so.

We had this for NT65, but have not seen it for NT7......anybody have the software?

JMD, hope is this coming along? Is it possible to fix this?

Also does anyone have any current info. on how to use this, I know it is based on elliot wave, using a 5.34.5 MACD, and fib levels. Thanks!

 

This is MTPr3dict0r addon for NT7 and it is not the older version that was patched in the past and posted around. I had that couple years ago and i compared the files. These are definitely 2012 files and different. As i could see it contains the new Trade Module too, if the education is made that way to set it to true.

 

http://[email protected]/file/WBhI4PZb/MTPNT7AddonsSetup356.html?refurl=d1url

Henknies, I just do not see what you see. It gives a lot of false signals. I guess you have you play with it based on your setup to get it optimized. I usr range bars and I didnt see anything that could be useful. In the past I used this indicator on NT65 and it was the best for what you are looking for: hxxp://scalper@ software.com/platforms/ts_spp.html (remove the @ and space).

 

If you could, let me know what setting you are using and I could see something different. It may do better on a non range bar setting, since range bars at times do not show wide range reversal bars as well, or inside reversal bars.

 

TraderNate, it´s not reset! When i remove the indicator and refresh chart and add it again, the signals dont move! )So it works not only in realtime, but also after the fact'

Ninjatrader does not store tick volume data, so in other words, this indicator cannot be some sort of updownvolume calculations...

 

But it picks bottoms and tops pretty good in range charts!!

 

Any change a reverse engineer could tell about how this bwtVRbar indicator works ?

Great share Omaron.....hope JMD can get this one fixed....hope he has time.

 

This is MTPr3dict0r addon for NT7 and it is not the older version that was patched in the past and posted around. I had that couple years ago and i compared the files. These are definitely 2012 files and different. As i could see it contains the new Trade Module too, if the education is made that way to set it to true.

 

http://[email protected]/file/WBhI4PZb/MTPNT7AddonsSetup356.html?refurl=d1url

Try this Dynamic SR Lines...I use this on higher time frames.....Not sure if it is close, but it is open source. Hope it helps

 

Link: http://www.mediafire.com/?pbvdofb53y7rn6z

 

Hi Trader34, the mediafire link that i upload is the latest installer file which include another indicator for support and resistance zone. it is call Dyn@mic SR... very good indicator... i hope JMD can do the patch for this...

Iam not sure which one works, but the one that does will work without a cracked NT7. No bars or autotrader, just indicators

 

B W T No 1: http://www.mediafire.com/?hi88yeegwyxkrhg

B W T No 2: http://www.mediafire.com/?ge422e1bx1r2bj4

 

B B T is on this thread: http://indo-investasi.com/showthread.php/19521-This-is-the-next-best-set-of-indis-for-NT7-B*B*Trades

 

 

Corn, these are based on B_ W_ T, which is similar to B_ B_ T. Squeeze, ATR based color bars....FYI The B B T DiverMap is a squeeze with the momentum changes to 18 vs. the default 20.

Corn, these are based on B_ W_ T, which is similar to B_ B_ T. Squeeze, ATR based color bars....FYI The B B T DiverMap is a squeeze with the momentum changes to 18 vs. the default 20.

 

Please John Maddog Doe can you have a crack at this set off indicators

TKS

It maybe a delta volume, and only runs in real time, when reset the data series is reset due to extra storage room that is needed....just a guess?

 

Hi guys , Tradernate!

 

I found the bwt indicators pretty good. Especially the bwtVRbar indicator. It's set to updownbarvolume , but when reapplying the indicator it doesn't repaint. (when resetting a ninja chart the live up down volume is lost)

So, I don't think it's really based on up down volume. Does anybody know how this indicator can pick the bottoms and tops that good??

Iam not sure which one works, but the one that does will work without a cracked NT7. No bars or autotrader, just indicators

 

No 1: http://www.mediafire.com/?hi88yeegwyxkrhg

No 2: http://www.mediafire.com/?ge422e1bx1r2bj4

 

If someone can let me know which one works, I will delete it....Thanks

 

i have not installed them cos I dont think any of them have been patched

Thank you for looking....and giving the update

 

Just checked and seems like my mac is a 64 bit machine, so maybe is the other way around?! I will play with the original dll more, maybe i will have more success.

 

@tardernate. I looked at them all but is too complicated for me. Most use same protection like M@rket B@lance, which was a challenge even for Zeraw. Other use some online validation (user/pass), something like MTP. That is a job for some1 way better then me. I am just trying to follow the few tips Zeraw posted in his initial "i am bored" thread.

Bisecom, to make sure JMD seees your post.....start a new thread......if possible add a pic so if JMD cannot get to this right away we can bump it. The key we all need to know if it worth it to do so.

 

Dear john.maddog.doe,

Good day. And thanks for unlocking and coding the indies.

Could you check the indicator which works at NT 6.5 and reprogram it for NT 7?

http://www.rapidshare.ru/2892898

Thank you in advance,

Regards.

Hey Big O, can u take a look at these and see if anything can be done with these indis......

http://indo-investasi.com/showthread.php/19518-(REQ)-John-maddog-doe-patch-thease-8-exe-files

 

Well.. i have no idea either.. i am exporting from NT installed on windows xp on a mac book pro, using parallels... maybe i have the 32bit version and you have the 64? i don't see an option to export different dlls... any one has any idea?

ForexMike, that would be a great idea to start a BMT thread so we can get a collection started. BMT does have a lot of good stuff, and trader34 wasn't off base. A lot of the indi's that are on the market now seem to have some genesis from BMT. This system is a hybred from BWT.

 

Anyone an elite member from Big Mikes?

Trader34, if you can trade price action and do not need help seeing strength of trend and divergence...then of course this system is not for you. This system without studing it, does look like a mess, if you load and need all the indis then do that...these can help...but you can take off or put on as you need. Its free right.....also this these indis pre-date BMT. BTW, I saw the owner make over 10K 1 day...watching his DOM and charts. Different strokes for different folks, I guess.

Trader34, if you have something better, then lay it down.......

 

 

Thanks for sharing Nate, but doesn't look so great to me looks much like all the spaghetti systems and indicators from Big Mikes 2 years ago and someone is still changing them and trying to make a system from them lol

Random, are you talking about the B*B*T traders and basic pack?, and/or just the autos-the auto's none insight as of yet.

 

OK, On the hunt...

 

Can you get the unobfuscated C# code? I'd love to learn how to do this if someone has the know how. I like to roll my own code but always like to see how others think too.

Random, lets find the indicators (system) and I can get it done......

 

Would love to see some of the code inside these autotraders (BBTrades, BWT, etc...) :)

I have been looking for that for some time and have not seen it.......but at $350 it maybe one to buy in the near future. I think his lastest autotrader ($3800) is using the the delta indi. Once we get that I have contacts that can reverse engineer the code and we can see how it is done. I think the next one also to try to get is the DOW*Indicator system and see how that does so well in backtest....be onthe lookout for that one.

Read the manual-page 7, it states how to install the sound files in the setup area....Reading the manual will tell you how each indicator can be used to make a simple trading system. Just to install and look at the indicators will not help a lot uless you have used them before and already know how to trade.

 

Hi thaifans,

not sure but think this is how, I have not tried it.

you need to extract the files from the zip file, then copy them to the sounds folder (located in main drive>program files>ninjatrader7>sounds)

I do not have any more templates, but here is the key..the 94 page manual is VERY GOOD and fairly clear on what and how ea indicator is used. every indicator is explained, and the last 30 pages or so have very good trading setups.....they work but make sure you practice on sim.

To test the system: Start with 5K sim account, record every trade. goal, is to avg. 3 ticks/pips per trade-min. Min win rate 70%. Goal is to double your account in 30 days. Make sure you add in your commission costs Use 2 contracts, sell the first at 4 ticks, SL at avg. swing distance, then move to BE at -4. then trail and ATR setting-I choose 1.618, to 2.01 depending on range bar setting. I use CL, and TF 3R, with 7R higher time frame, yes it moves fast, but if you practice it, the speed is not so bad. BBT uses 7R with 13R higher time frame. It just depends on how you like to trade, and make sure your no higher then 2% of acct. per trade.

 

 

Are there any more Templates in that litle locker off you? I know there should be a whole bunch off them,

thanks in advance

Lets keep bumping this one so JMD can see it and hopefully soon patch these.....a lot of good software. Alble*System is not great...simple ATR system based on a 10 EMA slope, but it has a good backteter built in.....which makes it helpful for testing historical days and time periods.

 

He probably can't patch the exe but rather the dlls added to NT by those exes. Hope he has the time, looks like a nice set but well protected (most similar to market balance as i can see, others having online or/and offline checks).

Omaron....can u remove NT protection checks? If not anyway welcome to our site.....and sorry for leaving my little message about not to pm u. I was just being protective since you are new, but it looks like you are legit in helping us find a software/system that can actually do what it says instead of junk that produces any and all signals/trades that have negative R/R, and losing % of signals....for huge wasted $$.

 

Enjoy: [email protected]/file/416lwo

 

Unzip and copy to /My Documents/Ninjatrader 7/bin/Custom/ then start (or restart) Ninja.

Corn...If I get any software I share it......best to use this system....watch for Bands being hit (keltner), watch CCI, Divermap (which is normal squeeze with momentum set to 18, standard 20), and volume pressure. When you see divergence of all the indicators and then with a DT/DB AND set ABC to show 3rd wave, most are winners. Pullback trades off the midline with VP and CCI support on a wave 3 work well also. I am on the hunt for B*B*T auto traders....hopefully coming up next.

 

 

You are my hero!

I got them....full sound files and base template. best ABC ind on the market...try it.

 

Here is the link: http://www.mediafire.com/?mtroi8qoxxufnhb

 

Are there any sound files ?

Corn...you are right.....I will have to get them....hopefully today.....thanks for the heads up

 

Are there any sound files ?