RichardGere

3 hours ago, blackhex said:

can he do mboxwave ?

Jhon had stopped selling mboxwave. Reasons unknown. There is also a free working version from Val1312q but unfortunately it flags for the MSILZilla trojan with Bitdefender and 30/63 positive with Virustotal.com. This trojan allows outside taking control of your computer without you being aware of it. It could be a false positive but those who want to use it must accept the risk.

Incidentally, Val free channel has been banned in TG. Hopefully he will set up a new channel soon.

On 4/30/2025 at 10:00 AM, Ninja_On_The_Roof said:

https://workupload.com/file/WGv8Dnk9AUx

https://workupload.com/file/4XS4zYb6943

Many thanks to Apmoo.

Thank you again for re-posting the files. Do appreciate your feedback on your favorite indicators. It is very helpful for us fellow traders.

BTW I just found out the indicator DTS Map that you mentioned is actually from the file QuantumLeapTrading.

Here is the link to the post for QuantumLeapTrading

You can contact Jhon at his telegram and send him the files.

You need to factor in an educator who can fix it

-deleted-

17 minutes ago, johnbn1 said:

Is it possible to become a member? Looking for Bookmap or Quantower!

I think anyone can join. Just need register using the Volume Tools Assistant then follow some instructions to set a Telegram bot or something. Cant remember the exact steps.

BTW Bookmap and probably Quantower (India) is no longer free. You need to check it up as I am not using their stuff.

Sad. That's true. Maybe someone snitched on him. Try contacting him at his Telegram address

@Jhon_snow_0  (beware of fake ones)

He upgraded my Optuma just 3 months ago when I requested as I wanted to test out the Go-NoGo indicators. Believe it or not, I haven't requested any update for 2 years as I realized I didn't need Optuma. But when I requested, he obliged and upgraded the software within 2 days.

33 minutes ago, iatin said:

yes that's right but in optuma you can also use the indicators to scan

First of all, I do admit that I have never used Metaswing even though I had the Metastock version 4.0 about 10+ years ago. I was made aware of its possibilites only just a couple of days ago.

When I last checked Optuma 1.6 two years ago, which was downloaded here, ND Research was not activated. It was activated in the earlier Market Analyst 8. Perhaps, we do have different copies of Optuma 1.6. However, for Market Analyst 8, I was not able to connect to live data, specifically Forex data. (in fact I did not knew that ND Research was Metaswing indicators until now)  I have since uninstalled Optuma 1.6 and Market Analyst 8 some time back.

16 hours ago, sapperindi said:

Bro, it is possible to crack. you will need a simulator to verify user id. send me DM I will send you the file.

Thanks. With this emulator, are able to access the free Yahoo data? Is your emulator the same as for Optuma 1.6?

Thanks to Apmoo, the full suite of this indictor sets, AKA Metaswing, is available for NT8.

Wow.  Thank you so much. 

Oh no. Hope they don't touch Mbox. I am starting to learn it and it does seem to be useful.

Thank you apmoo. So great to see you in action again. Most appreciate your stuff.

Hi; W3 has already ended and was an extended W3. So now waiting for W4 correction and entering W5 on the conditions for Type 1 trade.

I have traded this Aget strategy for 7 months before being called out from retirement. Made some money for a short holiday : )

12 years ago, I traded this Aget strategy and didn't do well. I stopped trading for 10 years due to work and returned on retirement, prior to the pandemic. Studied Elliott Wave and watched the AdvancedGet seminars which someone shared here.

The seminars though blurry to watch, was what that helped me to understand this strategy. Reading the manual was probably not enough. Of course, I am speaking from my own perspective.

What I felt important was that you need to know Elliott Wave and be able to make your own judgements to the count given by Advanced Get. Basically, I would look for a 45 degrees impulse wave for a type I and II trade. I skip those where the impulse count seems to be force-fitted with a range bound price action. 

Hope that helps. Cheers

8 hours ago, keith551 said:

Hi RichardGere, can you briefly explain how are you trading with Aget? Do you trade the Type1 and Type2 setups or maybe are you doing a top down analasys from D1,H4 to H1? A simple example would be nice...not interested in any images just a short explanation will do.Any help would be greatly apprecited!

Cheers!

Hi; I trade type 1 and type 2 setups individually per D1, H4 and H1. I don't do MTF but I do check other TF sometimes. Sometimes I do look for Wave 5 in Wave 5. But usually to look for Wave 5 end, I look for the Elliott Oscillator OSC divergence.

I show here an example of how I setup the 3 timeframes (with data from MT4) with the EURNZD pair. Notice that the 60m (H1) shows a probable setup with PTI of 79 with the impulse wave showing a nice 45 degrees ascend. Possible of W4 complex correction as W2 is simple ABC.

Unfortunately, I do not use the search function. I watch the forex market on 20+ pairs in 3 timeframes, ie 60 min, 4 hours and Daily. Data feed from MT4 with manual updating.

Have not been doing this for a couple of months now as I am involved in a work project.

Welcome. Hope you find success in your endeavor. This forum is not as lively as it used to be but do make the best of it.

There is Optuma 1.6 and Optuma 2.2 (offline version) here that you will probably find useful.

20 minutes ago, xblackbeardx said:

thank y

thank you so much you are legend !! works fine now 🙂

☺️

Your ASCII setting is not correct. If you look at the data file that I attached, there is a <time> column, which is not use and has values of 0. So your ASCII settings should be     

Date | Skip | Open | High | Low | Close | Volume |

Hope that helps

I use AdvancedGet 7.8 EOD version and not AdvancedGet 9 because AdvancedGet 9 does have some instability. There is an AdvancedGet 7.8 intraday that accepts 60 minute data but till date, I have not found an educated version of it yet.

This method that I am using was from more than a decade ago. It is using data from Metatrader 4. What you do is to attach an indicator (Agetdata.ex4) into a currency pair of 1 hour or 4 hours. What it does with the 1 hour or 4 hour chart is that it will convert each bar (1 hour or 4 hour bar) into EOD data and date it sometime into the past ie year 1930. Each daily data from 1930 onwards, represent 1 hour or 4 hours bar. This data is automatically saved into the MT4/Files directory. The saved file will automatically be added with a suffix of 60 or 240 so that it will identify the timeframe of the saved file.

You can then use Advancedget to access this file. The chart will appear to show daily data starting from year 1930 but each bar is actually a 1 hour or 4 hour data. So what you see is that chart pattern suitable for Advanceget analysis but of course the X-axis is showing daily timeframe. I am not sure if I explained it clearly but I have attached the resultant data file for your review.

I have attached a sample chart for audusd60. It shows a daily chart with a Daily X-axis starting from the year 1934. But the chart displayed is actually of the 60 minute chart from MT4.

I do believe you can also do this for 15 min or 30 min but I didn't try it because things happen too fast for me at 15 min. For 1 hour chart, I only need to manually rerun AdvancedGet every hour to get a new updated bar.

There is another indicator, CurrencyLoader.ex4, that does the same but I didn't use it because, it seems to have problem updating the files. I have attached it just in case you want to experiment with it.

AGData.mq4 AUDCAD60.prn Currency_Loader V2.3.ex4

9 hours ago, xblackbeardx said:

can you please help me to upload 1 hour chart into advanced get ? i only made it for daily and weekly and thank you in advance

my email 

[email protected]

I am only do it for 60 minutes for MT4 data. It will need a add-in for MT4. Let me know if you are interested before I proceed

5 hours ago, iatin said:

i have this from the telegraam group, without the emulator it doesn't work

https://workupload.com/file/xywARcPwGfS

Password: indo

If I can remember correctly, if this is the first time you install from the telegram group, when you run the Motivewave after cracking it via the emulator, Motivewave will still ask you for the license key.

You get the license key from the program Volume Tools Assistant 6.x which is downloaded from the same Telegram channel. You will first need to register an account before you enter the main page of the account where you can then get the license keys free for Motivewave, Bookmap, Quantower and Jigsaw (these keys are specific for your computer only). For NT8 and Sierra, these two are paid per month versions.

For the link to the said Telegram channel, refer to my earlier post.

9 hours ago, nefre821 said:

Can you share the link of the telegram channel please, thank you

I am not sure if this will work but here is a message link;

https://t.me/c/2130865682/304

Motivewave does have a study called Seasonality. But perhaps it isn't what you are looking for.

9 hours ago, candyman said:

Please try this.  no patching should be necessary but i just took a quick look at it.

On Ramp9 ( the full one i didn't test the lite version)

login with the name  joedirt and leave the serial number blank and try to log in.

should give you gold.

please let me know

Yes it works, Thank You.

Just testing it. Don't know how to use this software though.