Optuma 1.6 (Market Analyst by old name)

[⭐ option trader]

not allowed  4 shared.pls lookintothe attached picture

[ngoc76.nminh]

On 9/6/2024 at 10:58 AM, rtt518 said:

it is great! I got the  optuma 2.2 working with offline now

Could you guide detail install for first time optuma?

[Puzzle]

On 9/9/2024 at 1:52 PM, option trader said:

not allowed  4 shared.pls lookintothe attached picture

 

 

Try this:

(pass: 123)

https://mega.nz/file/OwNVCKiJ#6PjnMdThB-g6ZCn9nzyUZJ_-sC7OExdCV3dxAMCXjqc

 

[ngoc76.nminh]

On 2/24/2022 at 12:01 PM, mvssunny said:

 

Run EMU, Log in online mode first and then use offline mode.

excuse me, What is EMU? 

[nefre821]

15 hours ago, ngoc76.nminh said:

excuse me, What is EMU? 

emu lator.....

[abdi]

is this verision of optuma 32bit or 64 bit??

 

[Hakim]

i had problem with lower timeframe like H and minute timeframe how can i deal with it

[kris00l]

On 2/15/2023 at 10:34 PM, cotton1234 said:

Hello,

 

Following are the steps to install the same successfully.

 

1) Disable the internet on the machine

2) change the host file as documented in the read me.

3) Install the setup which is included in the zip file. Dont Download the new one.

4) Follow the readme file instruction in step 2. Use can use %appdata% on the command promt to go the folder mentioned.

5) Follow the readme file instruction in step 3.

6) Now check if any port 80 is in use. (netstat -nao | find ":80")

7) if nothing comes in the previous output, then you are good otherwise you need to kill the pid (taskkill /PID <Output in the last column of the previous command> /F)

😎 Once nothing comes in step 6 we are good to go next

9) Run VFA Tools and click start

10) Check (netstat -nao | find ":80") . YOu will have 1 process now.

11) Enable the internet.

12) Start the optuma and use the login as mentioned in readme file instruction.

 

Thanks

 

 

 

I had installed and ran the optuma 1.6 before i stumbled upon above post. I then manually, cleaned up folders/Reg etc and uninstalled. Then reinstalled following above steps. However, I still get violation issue.

Interesting thing is, optuma still remembers username and password how?

Any other suggestions? Thanks!

 

Edited January 11 by kris00l

[dima4000]

[dima4000]

Friends, can you take a video of the installation process or take a picture?
I can't install it. Thank you very much.

[⭐ RichardGere]

Sorry I couldn't find my old files to verify if my install was ok. Will check again later.

Edited Friday at 03:50 PM by RichardGere

[dima4000]

1.
copy file host to folder C:\Windows\System32\drivers\etc
2.
copy 2 file cart.dat, res.dat 
to folder C:\Users\xxxxxx\AppData\Local\Optuma  (xxxxxx is user on your computer)
3.
copy MACM.dll to folder  C:\Program Files\Optuma
4.
run VFA tools and click start
5.
login or work offline with
user:JohnDhi5
pass:jodh4307

Enjoy!
Jupi_T

 

I followed this instruction to do version 1.6
but it gives an error

[dima4000]

If possible, please help me with an installation tutorial video or log into my system with the Any Deck program.

[Puzzle]

Did you copy "OPCM_dll" target folder?

[Puzzle]

[dima4000]

41 minutes ago, Puzzle said:

بله کپی کردم 

exachang data 

I don't understand

I installed version 2.2
and 1.6 in two different folders

In which folder should I copy the opcm file?

[⭐ RichardGere]

Puzzle post does not appear to refer to installation but after installation and how data can be shared between 1.6 and 2.2.

OPCM.dll file is to be copied into the program folder for version 2.2 only

Anyway, suggest you solve the problem of installing and running 1.6 first. Hopefully, your computer does not belong to the rare group where it just wouldn't run Optuma properly.

I can give suggestions here are there.

[dima4000]

Thank you very much for your response.
I have deleted and reinstalled version 1.6 several times, but I still have the same problem.
I have deleted all the folders related to this software.
Can Windows 11 be a problem with Windows 11?

[⭐ RichardGere]

Send me all the files that you used to install and I will install it on my 3rd computer. Just want to make sure you have the right files. 

[dima4000]

Hello
After installing and deleting version 1.6 several times, I was able to
install version 1.6 and the program opened
Now for version 2.2
Should I install version 2.2 in a separate folder?
And copy that opcm file to the installation location
How do I share these two folders together?
I downloaded the same versions that were in this thread

https://mega.nz/file/OwNVCKiJ#6PjnMdThB-g6ZCn9nzyUZJ_-sC7OExdCV3dxAMCXjqc

[⭐ RichardGere]

That is good.

Go ahead to install 2.2 into another program folder and copy OPCM.dll file to the program folder of 2.2. (There is no need copy any res.dat and cert.dat files to document folder since they were already installed with 1.6. Installing 2.2 will not remove them) Now you can login OFFLINE mode in 2.2 using the same ID and Password of 1.6.

To share files, use 1.6 to download chart and save into a workbook. Then close 1.6 and open 2.2. Open workbook that you have saved previously.

BUT you can actually run 1.6 and 2.2 simultaneously although most people says it can't be done.

To run the two programs simultaneously (run 1.6 and 2.2 without having to close any of them)

Here is the cut and paste from my post at TSRh

(Run the emulator for 1.6 first)
Click either the 1.6 or 2.2 icon repeatedly and quickly for about 6 to 8 clicks. Let's say start with 1.6 icon first.
You should see one or two splash screens declaring the message "Optuma is already running. Would you like to close the other process and continue?"
Click Yes to all splash screens.

After this, you should see at least two login screens for version 1.6. Close all but leave one open.
(If you don't see at least 2 login screens, then close everything and redo the clicking again)
Now you can click the version 2.2 icon and the version 2.2 login screen will appear.
You can now proceed to login either online or offline with the respective versions.

To share static data (not realtime data) from version 1.6 to version 2.2
Save your workspace in version 1.6 after opening a chart.
In version 2.2 open the same workspace. You will have what version 1.6 has saved.
(reminder : In version 2.2, do not save workspace, just load only)


I don't use the program but just tested it. Hope this work around will be helpful for others.

Edited Saturday at 02:10 PM by RichardGere

[dima4000]

2 hours ago, RichardGere said:

Go ahead to install 2.2 into another program folder and copy OPCM.dll file to the program folder of 2.2. (There is no need copy any res.dat and cert.dat files to document folder since they were already installed with 1.6. Installing 2.2 will not remove them) Now you can login OFFLINE mode in 2.2 using the same ID and Password of 1.6.

To share files, use 1.6 to download chart and save into a workbook. Then close 1.6 and open 2.2. Open workbook that you have saved previously.

BUT you can actually run 1.6 and 2.2 simultaneously although most people says it can't be done.

To run the two programs simultaneously (run 1.6 and 2.2 without having to close any of them)

Here is the cut and paste from my post at TSRh

(Run the emulator for 1.6 first)
Click either the 1.6 or 2.2 icon repeatedly and quickly for about 6 to 8 clicks. Let's say start with 1.6 icon first.
You should see one or two splash screens declaring the message "Optuma is already running. Would you like to close the other process and continue?"
Click Yes to all splash screens.

After this, you should see at least two login screens for version 1.6. Close all but leave one open.
(If you don't see at least 2 login screens, then close everything and redo the clicking again)
Now you can click the version 2.2 icon and the version 2.2 login screen will appear.
You can now proceed to login either online or offline with the respective versions.

To share static data (not realtime data) from version 1.6 to version 2.2
Save your workspace in version 1.6 after opening a chart.
In version 2.2 open the same workspace. You will have what version 1.6 has saved.
(reminder : In version 2.2, do not save workspace, just load only)


I don't use the program but just tested it. Hope this work around will be helpful for others.

Hello, good morning
I really thank you, dear friend, for your efforts and kindness.
You helped me, my problem was solved.
Thank you very much, my love.
I hope you are always healthy.😍

[⭐ RichardGere]

Welcome Friend