Jump to content

Acutrader or V-Stops?


Tim Meister

Recommended Posts

Hallo and greetings. Does anybody have anything similar to Acutrader or the V-Stops 2. It looks like the normal NT Supertrend lines beneath or above price.Any version would suit me well

http://www.baranalyzer.com/ba/vstops-v2

http://www.acutrader.com/

 

Thanks!:)

 

 

Sorry timo I have none of the two you specified. I myself have been looking for Acutrader for a looong time.

Link to comment
Share on other sites

Sorry timo I have none of the two you specified. I myself have been looking for Acutrader for a looong time.

 

Hallo and greetings. Does anybody have anything similar to Acutrader or the V-Stops 2. It looks like the normal NT Supertrend lines beneath or above price.Any version would suit me well

http://www.baranalyzer.com/ba/vstops-v2

http://www.acutrader.com/

 

Thanks!:)

 

If it's identical to the normal Supertrend indicator which can be downloaded for free from BMT why are you asking for Acutrader and V-Stops? Why bother about these if you can get comparative results with the commercial versions? Not to put you off the commercial versions Timo,but I'd just like your reasoning or rationale behind your wanting Acutrader or V-Stops when a similar free indicator which is relatively accurate can be had.

Link to comment
Share on other sites

Osman he just wants to check on the accuracy standpoint I think. They may be similar indicators but coded differently by different people. So the results will probably be different.

 

Exactly Mart! Couldn't have said it better myself. Btw sorry to hear about Steve's relapse of his infection and re hospitalisation. :( I wish him well and a speedy recovery!

Link to comment
Share on other sites

Hallo and greetings. Does anybody have anything similar to Acutrader or the V-Stops 2. It looks like the normal NT Supertrend lines beneath or above price.Any version would suit me well

http://www.baranalyzer.com/ba/vstops-v2

http://www.acutrader.com/

 

Thanks!:)

 

 

 

G'day Timo.I understand you are looking for the Acutrader and V-Stops.Unfortunately I have none of those yet and Indo forum haven't either (according to my Archive search) .But I do have something very similar to the Supertrend, Acutrader and V-Stops,and maybe you'd like to try it and test it, including it's autotrader. After the algo detects a turn in trend or momo it also reflects that with lines/dots above and below price. I know it's not as accurate as Acutrader but this baby used to sell in droves in 2012, when they used to call it "Wall Street's Best Kept Secret" until copycats like Acutrader and Bar Analyzer VStops came on the scene. It is called Rampage, and I have the indicator and NT strategy.I have forgotten who uploaded or educated it a few years ago.But do take a look and check on the accuracy, etc if you want.Just buy on blue and sell on red.When Institutional traders are in accumulation mode, the market goes UP.(Blue)

When Institutional traders are in distribution mode, the market goes DOWN.(Red)

Here's their site

http://www.rampagetrading.com/

 

http://i63.tinypic.com/25jw74z.jpg

 

and here's the upload

FinalRampage7.zip (761.31KB)

Download Page Link

https://www.sendspace.com/file/gpevnw

 

and since you sent me several "Get Well" ecards last week,I have also included all the training material for you as well.

 

 

 

RampageManuals.zip (1.56MB)

Download Page Link

https://www.sendspace.com/file/lt0745

 

Rampage Educational Training.zip (212.39MB)

Download Page Link

https://www.sendspace.com/file/legrkd

 

 

 

FinalRampage.zip contains Final.Rampage.dll,Final.RampageV7MTA.dll,and Final.RampageSAT.dll.

All the educated dynamic link library files that you will need.Just copy and paste into your ...bin/system directory. Then restart NT7, perform a indicator general compile(F5) and you are set! PM me if you are unable to acquire the relevant files.please message me on the FB site(I an having problems with my PM content in Indo) and I'll check it out Timo.

MHT is a Web page archive file format.

Regarding RampageV7 and RampageV7MTA, these are your indicators to add to the chart from the indicators menu and RampageV7MTA and RSAT can be found in your Ninjatrader strategies menu.Those are the autotraders.

 

 

Rampage Educational Training.zip contains Members Rampage Trading.mht(which contains links to all the training material for Rampage,including links to other pdf and how to reading material),including 2 of their best training videos in wmv format).

 

Here's a screenshot of the Final Rampage.

http://www.rampagetrading.com/images/auto-trader/2012-02-03_1758web2_lrg.jpg

 

 

And here's a NinjaTrader Partner Webinar of Rampage with instruction for use.

https://www.youtube.com/watch?v=9Tt8U1ml474

 

 

Everything should be self-explanatory but any questions just send me a PM at my FB site or ask me during Skype Timo

 

Cheers,;)

Edited by stevemoore
Link to comment
Share on other sites

Many, many thanks to you steve.:)

I didn't know about this Rampage.

It's a good thing you have uploaded all the required training and learning material.(Lost without it)

I will definitely try the indicators and autotrader and tell you about it.

Yes I think your Indo PM box is broken and I will PM you at FB,if I have problems.

Thank you!

danke schön! :)

Link to comment
Share on other sites

Steve if I may,can I ask you a question and a solution perhaps? I have copied the dll files to my bin/custom dir and did a general compile of the indicators just as you instructed.I have looked for and included the indicators RampageV7 and RampageMTA and added them to my chart.

However,the RampageV7MTA is there but the panel is blank! Do you have a fix for that? Btw sorry for posting in the forum, but I thought this might be a problem for others too and they might want to read your answer.

 

 

Danke Mein Freund :)

Link to comment
Share on other sites

Steve if I may,can I ask you a question and a solution perhaps? I have copied the dll files to my bin/custom dir and did a general compile of the indicators just as you instructed.I have looked for and included the indicators RampageV7 and RampageMTA and added them to my chart.

However,the RampageV7MTA is there but the panel is blank! Do you have a fix for that? Btw sorry for posting in the forum, but I thought this might be a problem for others too and they might want to read your answer.

 

 

Danke Mein Freund :)

 

No problem Timo I understand. Right click the chart and go to the Indicators menu. Find for the RampageV7MTA indicator settings on the right. Now go to the Parameters section, and look for the File Frame Type section .Click it to bring down the menu.It will have all your installed bartypes.Now make sure you click on the bartype you are using in the chart, Tick,Volume, Range, Minute,etc. The default is Minute.

After you have done that go to the section under that where you will see the Time Frame Value section and update it with the value of the bartype you are using,for example if using Minute, how many minutes? If 5 mins type 5.If using renkos, how many renkos for the value? 4? or 6 renkos? Then type 4 or 6.

After you are finished click on Apply and OK and you are done.Do that and see how it works

 

Timo what is your favored/most used bartype.Let me know and I will upload a template for you which you can use with Rampage. In any parameters section where you have to fill in your customised settings, don't forget you can always right click your mouse on that section and click on "Set default for....." for it to always remember your default settings when you add that same indicator again. Or you can also create a template which will always have the same settings until you change them again.

 

Hope that answers your questions Timo

Cheers,

Link to comment
Share on other sites

Thank you much steve for your reply. I will try your solution now!

 

Update:

mein Gott! es funktioniert!. I did all the steps you outlined and refreshed the chart and the indicator panel is now filled with the indicator! Thank you!

steve may I know how you can know the specific steps I needed to do to get it to show?

I was using renko but the settings was showing Minute.

Btw I usually use the renko bartype.

Thanks again steve for all the help and info.

Danke!

Edited by Tim Meister
updating after trying steve's solution
Link to comment
Share on other sites

Thank you much steve for your reply. I will try your solution now!

 

Update:

mein Gott! es funktioniert!. I did all the steps you outlined and refreshed the chart and the indicator panel is now filled with the indicator! Thank you!

steve may I know how you can know the specific steps I needed to do to get it to show?

I was using renko but the settings was showing Minute.

Btw I usually use the renko bartype.

Thanks again steve for all the help and info.

Danke!

 

 

 

G'day Timo.

Glad it worked.Well the Rampage has been around for a few years now, and most of it's trading nuances are quite well known now to most traders. But their default values for the indicator settings should have been more "trader friendly".Many in the past have also asked about your exact problem and the solution is well known to users now.The Rampagev7MTA is just their accumulation/distribution ribbon plot.

Btw here is the template you asked for. The indicators are RampageV7 and Rampagev7MTA (settings for your favorite Bartype 4 Renko,change it if you need to)

 

 

Rampage template.xml (16.35KB)

Download Page Link

https://www.sendspace.com/file/zmb94k

 

 

Copy the.xml file to Ninjatrader 7/templates/chart directory

 

 

Cheers mate.:)

Link to comment
Share on other sites

  • 4 months later...
G'day Timo.I understand you are looking for the Acutrader and V-Stops.Unfortunately I have none of those yet and Indo forum haven't either (according to my Archive search) .But I do have something very similar to the Supertrend, Acutrader and V-Stops,and maybe you'd like to try it and test it, including it's autotrader. After the algo detects a turn in trend or momo it also reflects that with lines/dots above and below price. I know it's not as accurate as Acutrader but this baby used to sell in droves in 2012, when they used to call it "Wall Street's Best Kept Secret" until copycats like Acutrader and Bar Analyzer VStops came on the scene. It is called Rampage, and I have the indicator and NT strategy.I have forgotten who uploaded or educated it a few years ago.But do take a look and check on the accuracy, etc if you want.Just buy on blue and sell on red.When Institutional traders are in accumulation mode, the market goes UP.(Blue)

When Institutional traders are in distribution mode, the market goes DOWN.(Red)

Here's their site

http://www.rampagetrading.com/

 

http://i63.tinypic.com/25jw74z.jpg

 

and here's the upload

FinalRampage7.zip (761.31KB)

Download Page Link

https://www.sendspace.com/file/gpevnw

 

and since you sent me several "Get Well" ecards last week,I have also included all the training material for you as well.

 

 

 

RampageManuals.zip (1.56MB)

Download Page Link

https://www.sendspace.com/file/lt0745

 

Rampage Educational Training.zip (212.39MB)

Download Page Link

https://www.sendspace.com/file/legrkd

 

 

 

FinalRampage.zip contains Final.Rampage.dll,Final.RampageV7MTA.dll,and Final.RampageSAT.dll.

All the educated dynamic link library files that you will need.Just copy and paste into your ...bin/system directory. Then restart NT7, perform a indicator general compile(F5) and you are set! PM me if you are unable to acquire the relevant files.please message me on the FB site(I an having problems with my PM content in Indo) and I'll check it out Timo.

MHT is a Web page archive file format.

Regarding RampageV7 and RampageV7MTA, these are your indicators to add to the chart from the indicators menu and RampageV7MTA and RSAT can be found in your Ninjatrader strategies menu.Those are the autotraders.

 

 

Rampage Educational Training.zip contains Members Rampage Trading.mht(which contains links to all the training material for Rampage,including links to other pdf and how to reading material),including 2 of their best training videos in wmv format).

 

Here's a screenshot of the Final Rampage.

http://www.rampagetrading.com/images/auto-trader/2012-02-03_1758web2_lrg.jpg

 

 

And here's a NinjaTrader Partner Webinar of Rampage with instruction for use.

https://www.youtube.com/watch?v=9Tt8U1ml474

 

 

Everything should be self-explanatory but any questions just send me a PM at my FB site or ask me during Skype Timo

 

Cheers,;)

 

Hi steevemoore,

can you reup all please ? :)

thx

Link to comment
Share on other sites

  • 4 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...