comeinvest Posted October 10, 2017 Report Posted October 10, 2017 Most certainly somethings is wrong with your host file below are the details inside my host file. any problem? Please advice. thx ------------------------------------- #multicharts 9.1 127.127.20.0 mcauth.com 127.127.20.0 mcauth1.com 127.127.20.0 mcauth2.com #multicharts plugins 127.127.20.0 www.tssupport.com 127.127.20.0 www.decisionbar.com 127.127.20.0 www.optionprofits.com ----------------------------------------------
Albnd Posted October 10, 2017 Report Posted October 10, 2017 below are the details inside my host file. any problem? Please advice. thx ------------------------------------- #multicharts 9.1 127.127.20.0 mcauth.com 127.127.20.0 mcauth1.com 127.127.20.0 mcauth2.com #multicharts plugins 127.127.20.0 www.tssupport.com 127.127.20.0 www.decisionbar.com 127.127.20.0 www.optionprofits.com ---------------------------------------------- Seems ok. Please make sure your http and https ports are open.
FXWallabie Posted October 10, 2017 Report Posted October 10, 2017 below are the details inside my host file. any problem? Please advice. thx ------------------------------------- #multicharts 9.1 127.127.20.0 mcauth.com 127.127.20.0 mcauth1.com 127.127.20.0 mcauth2.com #multicharts plugins 127.127.20.0 www.tssupport.com 127.127.20.0 www.decisionbar.com 127.127.20.0 www.optionprofits.com ---------------------------------------------- Look if you have this line in hosts file: 127.0.0.1 localhost If you don´t have this line, then write and save change, next restart your PC and try open MC again.
comeinvest Posted October 10, 2017 Report Posted October 10, 2017 (edited) i have checked and don't have those line in the host file . i only got these details in the host file. would like to know where should i add to ? do i add between the lines or add at the bottom ? Please advice. Thanks in advance #multicharts 9.1 127.127.20.0 mcauth.com 127.127.20.0 mcauth1.com 127.127.20.0 mcauth2.com #multicharts plugins 127.127.20.0 www.tssupport.com 127.127.20.0 www.decisionbar.com 127.127.20.0 www.optionprofits.com Edited October 10, 2017 by comeinvest
Albnd Posted October 10, 2017 Report Posted October 10, 2017 Look if you have this line in hosts file: 127.0.0.1 localhost This is not relevant ;) comeinvest 1
comeinvest Posted October 10, 2017 Report Posted October 10, 2017 This is not relevant ;) i have follow the instruction and still got the following expiry on multichart after i click on "start" on licEMU. is this normal ?
FXWallabie Posted October 10, 2017 Report Posted October 10, 2017 i have checked and don't have those line in the host file . i only got these details in the host file. would like to know where should i add to ? do i add between the lines or add at the bottom ? Please advice. Thanks in advance #multicharts 9.1 127.127.20.0 mcauth.com 127.127.20.0 mcauth1.com 127.127.20.0 mcauth2.com #multicharts plugins 127.127.20.0 www.tssupport.com 127.127.20.0 www.decisionbar.com 127.127.20.0 www.optionprofits.com Firts look if hosts file is in: C:\windows\system32\drivers\etc (for Win 32 bits) and in 64 Bit W7 or higher, also to: C:\windows\sysWOW64 Then if you have Win10 64 bits, the hosts file must be in these two folders. Then next, write those line above (although it does not have importance where, below also work fine). Save changes. Restart your PC. comeinvest 1
FXWallabie Posted October 10, 2017 Report Posted October 10, 2017 This is not relevant ;) For me, was relevant, I had this problem, and the solution was to write this line: 127.0.0.1 localhost This line, does than all MC's communication with his Web site go to the localhost in your PC and not to MC site.
comeinvest Posted October 10, 2017 Report Posted October 10, 2017 Firts look if hosts file is in: C:\windows\system32\drivers\etc (for Win 32 bits) and in 64 Bit W7 or higher, also to: C:\windows\sysWOW64 Then if you have Win10 64 bits, the hosts file must be in these two folders. Then next, write those line above (although it does not have importance where, below also work fine). Save changes. Restart your PC. finally i'm done :) thanks for the great support everyone . All the best in your trading :)
comeinvest Posted October 11, 2017 Report Posted October 11, 2017 after successfully installed MC, i have subscribe for CQG demo data in amp futures website. I managed to run multichart.net ( free trial ) from amp futures website with CQG demo data but not the Multichart educated version that i installed. is this normal or only can run with IQFEED data ? Can someone verify this. Thanks
Bend Posted October 12, 2017 Report Posted October 12, 2017 after successfully installed MC, i have subscribe for CQG demo data in amp futures website. I managed to run multichart.net ( free trial ) from amp futures website with CQG demo data but not the Multichart educated version that i installed. is this normal or only can run with IQFEED data ? Can someone verify this. Thanks Thhe Demo doesn't, but I assure you the real credentials do run.
Runereader Posted October 12, 2017 Report Posted October 12, 2017 I am finding on one installation that LicEMU quickly takes up around 75% of CPU and then after a minute or so, completely maxes it out. It used to be for many months that on this installation (only) LicEMU used 75% (vs negligible usage on all others), but now it quickly goes to 100% CPU usage. This maxing out just started after many months of LicEMU using 75% on this one installation. Stopping LicEMU does not cause the CPU usage to go back down, nor does exiting - have to kill the process in Task Manager->processes, after which CPU usage immediately drops to negligible levels. Anyone have this experience/insights/solution?
comeinvest Posted October 13, 2017 Report Posted October 13, 2017 Thhe Demo doesn't, but I assure you the real credentials do run. i do agree, the AMP CQG DEMO seriously is rubbish, all data not tally at all, very harmful .
comeinvest Posted October 13, 2017 Report Posted October 13, 2017 I am finding on one installation that LicEMU quickly takes up around 75% of CPU and then after a minute or so, completely maxes it out. It used to be for many months that on this installation (only) LicEMU used 75% (vs negligible usage on all others), but now it quickly goes to 100% CPU usage. This maxing out just started after many months of LicEMU using 75% on this one installation. Stopping LicEMU does not cause the CPU usage to go back down, nor does exiting - have to kill the process in Task Manager->processes, after which CPU usage immediately drops to negligible levels. Anyone have this experience/insights/solution? for me instead of high CPU usage, i'm having high RAM usage . When my RAM consume more than 90% usage, i would personally close all my Chrome window and reopen. Then it would fix the issue. Hope it would give you some insight
AnU Posted November 21, 2017 Report Posted November 21, 2017 I am getting this issue while running lic.emu https://i.imgur.com/LUSkhBA.png Can some one please help.
⭐ noyp Posted November 26, 2017 Report Posted November 26, 2017 I am getting this issue while running lic.emu https://i.imgur.com/LUSkhBA.png Can some one please help. Make sure mc85.pfx is in the same folder with Lic.exe emulator AnU 1
AnU Posted November 27, 2017 Report Posted November 27, 2017 (edited) Yes it is working solution. There are many add-ons in Multicharts website: https://www.multicharts.com/add-ons/ But some are not available at multichart software. How we can download them. Edited November 27, 2017 by AnU
bassmark Posted December 28, 2017 Report Posted December 28, 2017 please repost the emu. Also, does anyone have .NET version with lic emu? TIA
gdshan Posted January 1, 2018 Report Posted January 1, 2018 Any indicator for P&F charts in MC that accommodates %age as box size?
Infonut Posted February 2, 2018 Report Posted February 2, 2018 Can someone post the latest LicEMU for version 11. Thanks in advance ... :)
⭐ laser1000it Posted February 2, 2018 Report Posted February 2, 2018 (edited) Can someone post the latest LicEMU for version 11. Thanks in advance ... :) PLS have a look that LICEMU shared here in II is working also for MC11 Edited February 2, 2018 by laser1000it
gdshan Posted February 2, 2018 Report Posted February 2, 2018 Can someone post the latest LicEMU for version 11. Thanks in advance ... :) Here you go. Cheers. https://mega.nz/#!cLAiBbbB!yRh-0CvXEgMIpYq5q55h_Ac42qWrA6ae66sf9Qd5hw8 gero, ⭐ Minion, Infonut and 1 other 4
Infonut Posted February 2, 2018 Report Posted February 2, 2018 Thank You !!!! Here you go. Cheers. https://mega.nz/#!cLAiBbbB!yRh-0CvXEgMIpYq5q55h_Ac42qWrA6ae66sf9Qd5hw8 Posteris 1
mumin16 Posted March 7, 2018 Report Posted March 7, 2018 i have error : "only one usage of each socket address (protocol/network address/port) is normally permitted. check server port in not it use"
eros1973ms Posted March 8, 2018 Report Posted March 8, 2018 i have error : "only one usage of each socket address (protocol/network address/port) is normally permitted. check server port in not it use" no program should be using port 80. open a command window and input: netstat -ano at the beginning of the list you should see port 80 and the PID of the process/program which is using. teminate that program and start licemu
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now