Coco Posted October 6, 2011 Report Share Posted October 6, 2011 ok here is the decompiled version of this indicator that outputs for 5 digit broker, thanks to musketeer from the metatrader section http://www.mirrorcreator.com/files/1WLBHXJF/MetToDet_-5.mq4_links its can not running, explain pls Quote Link to comment Share on other sites More sharing options...
⭐ noyp Posted October 8, 2011 Report Share Posted October 8, 2011 its can not running, explain pls hi, this indicator is for version 4 of metatrader, think it wont work for version 5 Quote Link to comment Share on other sites More sharing options...
fx9548 Posted November 7, 2011 Report Share Posted November 7, 2011 Hi everybody, You're doing a great job. I also have a problem with dt6.I installed the software. I couldn't use the key generator. I found the .dll file that it was needed and I paste it in the DT/bin folder. When I run the DT6 it is asking me for en esignal. I 'm answering yes and then it gives me this message. "Access violation at address 00628F39 in module 'DT6.exe.' Read of address 00000000" Please advice what did I do wrong. After that the software is running but without data. It's just empty. Please advice what to do or how to run the key injector.... I'm running the key injector but it's doing nothing. It doesn't give me an error too. Please advice.... Quote Link to comment Share on other sites More sharing options...
tamergad Posted December 6, 2011 Report Share Posted December 6, 2011 The data type is ASCII format (.prn). But first you need to edit the ascii format according to this picture that i made: http://www.kimag.es/share/35534278.gif I use DT 5. .131 may you please write down the portfolio settings ... because the picture dosent appear with me... regards Quote Link to comment Share on other sites More sharing options...
Zeeshan Zia Posted December 7, 2011 Report Share Posted December 7, 2011 Where is the image link Dave ? How to convert the ascii file ? Quote Link to comment Share on other sites More sharing options...
⭐ goffredomameli Posted December 16, 2011 Report Share Posted December 16, 2011 (edited) Well, I have xp...I put the indicator in metatrader and put on chart..on left corner appears DT DATA GENERATOR. In expert-files I see both the exported file and the TXT info. If I open the TXT info I read: delimit=, skip=0 dt=1 ti=2 op=3 hi=4 lo=5 cl=6 vol=0 oi=0 dtformat=YYMMDD tiformat=HH_MM ext=.PRN cf=4 When I go to dt ascii setup in the TIME FORMAT I can choose only: HHMM HH:MM HH:MM:SS HHMMSS but there is not HH_MM.... I also copy the TXT info file into DT folder but I can't open any charts.... thank's in advance for help... I found also this http://forum.iran-egold.com/showthread.php?t=2667&p=26143 but ascii setup is different... Edited December 16, 2011 by goffredomameli Quote Link to comment Share on other sites More sharing options...
chu-chi Posted December 17, 2011 Report Share Posted December 17, 2011 using MetToDet_-5.mq4 (I edited mq4 to append .txt instead if .prn to filenames) I was able to have dt6 work with oanda mt4. txinfo.txt details are: delimit = , skip = 1 dt = 1 ti = 2 op = 3 hi = 4 lo = 5 cl = 6 vol = 7 oi = 0 dtformat = CCYYMMDD tiformat = HHMMSS ext = txt cf = 5 ianf0ster and ⭐ goffredomameli 2 Quote Link to comment Share on other sites More sharing options...
⭐ goffredomameli Posted December 20, 2011 Report Share Posted December 20, 2011 Thank you to CHU-CHI,now it is ok....I put your setup for ASCII file.... Quote Link to comment Share on other sites More sharing options...
braveheart2009 Posted December 31, 2011 Report Share Posted December 31, 2011 to convert the files from .prn to ASCII you need to select file>portfolio manager>ASCII Setup>[browse to mt4 prn files in experts>files folder] and add and save them also ensure that when selecting new chart option select ASCII file format not the default one took me ages to see that its at the top then your chart will appear. I think people should take time to make a video on youtube how to do it I may. ianf0ster 1 Quote Link to comment Share on other sites More sharing options...
danhoyda Posted February 8, 2012 Report Share Posted February 8, 2012 where do i get metatrader? Quote Link to comment Share on other sites More sharing options...
barend15 Posted February 8, 2012 Report Share Posted February 8, 2012 where do i get metatrader? Google it!!!! Quote Link to comment Share on other sites More sharing options...
mike4x Posted February 13, 2012 Report Share Posted February 13, 2012 (edited) ................. Edited February 26, 2013 by mike4x Quote Link to comment Share on other sites More sharing options...
chris66 Posted March 12, 2012 Report Share Posted March 12, 2012 (edited) Hi guys! I have been reading through this thread, Im trying to get this to work, I have DT version 6 and MT4 FxOpen ECN demo, I have attached the indicator to my chart and had them running for a while, but I can't find the files it is suppose to generate? there are no files inside MT4/Expert/Files what am I doing wrong? Im using Win 7 please help Edited March 12, 2012 by chris66 Quote Link to comment Share on other sites More sharing options...
chris66 Posted March 13, 2012 Report Share Posted March 13, 2012 can someone please help me to set this up? I will greatly appreciate it Quote Link to comment Share on other sites More sharing options...
chris66 Posted March 13, 2012 Report Share Posted March 13, 2012 Still no luck getting this to work, I see no files generated? what am I doing wrong? can someone help please? Quote Link to comment Share on other sites More sharing options...
⭐ Unclepips Posted March 14, 2012 Report Share Posted March 14, 2012 Still no luck getting this to work, I see no files generated? what am I doing wrong? can someone help please? Open MT4 - make sure you have the MT4 indicator "MetToDet.ex4" runs in the instrument chart that you want to feed. Make sure you change the setting in the indicator to appropriate time frame/s that you want. Open DT6 - Click on File, then Portfolio, then ACSII setup, 1. select group files 2. c: program files, MT4 platform that you use, go to experts, files you'll see under # 3 Extension/file: prn. of course below that the list of instruments. 4. Date Format: CCYYMMDD 5. Time Format: HHMMSS 6. PRICE DISPLAY: 0.0000 7. SKIP: 0 8. Delimiter: Comma 9. Column position: date: 1 Time: 2 Open: 3 High: 4 Low: 5 Close: 6 Volume: 7 Open Int: 0, Then click Save ****Make sure under MT4 Platform, experts, files: has a file named "texinfo.inf" in that folder. the file should come with the met2dt6 indicator. that textinfo.inf file should list as such: delimit = , skip = 0 dt = 1 ti = 2 op = 3 hi = 4 lo = 5 cl = 6 vol = 7 oi = 0 dtformat = CCYYMMDD tiformat = HHMMSS ext = prn cf = 4 Final step: reopen DT6 again, while MT4 is still running. go to File, Portfolio manager, New, 1 select: ASCII, 2 Main C:, 3 program files, MT4, Experts, files, you'll see a list of instruments popped up in the folder, add all to the portfolio section and save them. Open DT6, file, new and select whatever time frame that you like from there. ⭐ AndyS 1 Quote Link to comment Share on other sites More sharing options...
chu-chi Posted March 14, 2012 Report Share Posted March 14, 2012 Hi guys! I have been reading through this thread, Im trying to get this to work, I have DT version 6 and MT4 FxOpen ECN demo, I have attached the indicator to my chart and had them running for a while, but I can't find the files it is suppose to generate? there are no files inside MT4/Expert/Files what am I doing wrong? Im using Win 7 please help I suggest installing mt4 to other location than "Program Files", Windows 7 has admin protection under Program files folder. That is, unless you run mt4 as admin, files may not be updated under Program Files mt4 install dir. When you run the indicator to a specfic pair chart, you should see files starting with e.g DT_EURUSD_M1, DT_EURUSD_M15 (for eurusd pair 1m and 15min timeframes selected for example) under <yourmt4installdir>\experts\files folder Quote Link to comment Share on other sites More sharing options...
janove Posted March 19, 2012 Report Share Posted March 19, 2012 Hi Unclepips.. i Have followed ur directions but unfortunately I cant seem to get my charts to produce live data. I keep reading about changing the text file but when I see the file in my mt4 I see no text file just prn. Can someone please help me get this working properly. I know people have said the same thing but I need a clear understanding on txt files and getting my charts live. Thank you Quote Link to comment Share on other sites More sharing options...
janove Posted March 19, 2012 Report Share Posted March 19, 2012 ok so I have the chart in dt6 the only thing is it is not live...I've pressed the red button to green can someone please help. thank you Quote Link to comment Share on other sites More sharing options...
cuchuflito Posted February 9, 2013 Report Share Posted February 9, 2013 Hi Dave can´t find the indicator, the link no longer exists....can you helP? I actually have one that works similarly, if you want I can gladly send you a copy....I payed a programer a few years back to wirite it...the only problem is that if you update your chart just at the moment when it´s changing values, it will crash te chart, and mostly you need to restart DT.. Thanks in advance Quote Link to comment Share on other sites More sharing options...
LievenX Posted February 12, 2013 Report Share Posted February 12, 2013 Hi Here is an indicator that generate real time data (every 1 minute) for Dynamic trader. You need to paste it in your metatrader foder/expert/indicator Then go to metatrader, attach the indicator to chart (on propoertise you can se;ect each time frame you want). Go to DT and make a new portfolio. brows the generated files on your metatrader foder/expert/files Then you have the real time data (updated every minuet) in DT. It uses little resourses of your computer. here is the link http://www.4shared.com/file/216426301/e4127d57/MetToDet.html I have been using it for some weeks and it has no problem. The link is dead bros, can you help me and reupload again the ndicator that generate real time data (every 1 minute) for Dynamic trader ? Best regards! Quote Link to comment Share on other sites More sharing options...
floyjoy Posted April 23, 2013 Report Share Posted April 23, 2013 (edited) After starting both DT and MT in Win8 as admin i was able to update charts in DT with MT data. Hope that helps ... Edited April 24, 2013 by floyjoy new situation Quote Link to comment Share on other sites More sharing options...
⭐ Unclepips Posted March 7, 2014 Report Share Posted March 7, 2014 This one works for me. http://www.sendspace.com/file/6bym07 Unclepips The link is dead bros, can you help me and reupload again the ndicator that generate real time data (every 1 minute) for Dynamic trader ? Best regards! ⭐ whinny 1 Quote Link to comment Share on other sites More sharing options...
TraderWork Posted March 20, 2014 Report Share Posted March 20, 2014 thanks man its very help Quote Link to comment Share on other sites More sharing options...
cuchuflito Posted March 30, 2014 Report Share Posted March 30, 2014 dt 7 is out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.