Jump to content

Refined Elliot Trade


firma

Recommended Posts

Hi,

 

it's your lucky day.. :)

it's the MissionForex package.. from my archive ! :D

http://www.missionforex.com/index.php?route=product/product&product_id=457

 

I don't know if it works, I don't use it..

https://mega.nz/#!pOw0SA4D!i75F7BOWQWXejxglhfxF4272M-btmW1RaOIHVEZRHo0

 

thank you to let me know if it's ok for you.. :)>-

Link to comment
Share on other sites

  • Replies 96
  • Created
  • Last Reply

Top Posters In This Topic

Thank you very much Ticks for wanting to help me out, I really appreciate that. But unfortunately, that Missionforex package did not help in activating the "WECS" indicator of RET :-(

 

In my original installation of v1.13.2, it listed these add-on "Powerpack" files in the RET installation folder:

 

LT.000, LT.001, LT.002, LT.003, LT.004, LT.005, LT.007, LT.008

 

... and in the "About" window it showed these things "activated" (it says "Technical Indicators enabled" even though the WECS indicator is not really enabled):

 

https://anonfile.com/M6Q2B6dfbc/RET-org-config2.png

 

... but the WECS indicator was never functional. So I had believed that I was missing some key Powerpack files - like the ones that were in the Missionforex archive. I was quite excited when you posted this download, but after adding these files (LT.006, and LT009 through LT.020) to the RET installation folder, it did not make any difference :-( Maybe there is something I am overlooking? It's possible - I have been know to make a mistake in my life before!

 

 

Has anyone else experienced this same thing? I would very much like to activate this special WECS indicator in RET...

 

Thanks!

Shawn

Link to comment
Share on other sites

Here's the install for v1.11.2 Candyman:

 

https://anonfile.com/Lfq8Cdd0b3/RETv11204Full-SW.rar

 

 

Wasn't aware of the possible removal of WECS in the later versions. According to the pdf manual for it, it seemed like it was based on a valid premise... and it looks like they sure as heck did a lot of painstaking backing research on it.

 

Cheers

Shawn

Link to comment
Share on other sites

Ravi - that v1.11.2 download is only the installation setup file. No medicine, sorry.

 

And for the files in the Missionforex archive file - I tried just copying them to the RET installation folder along with the other LT.xxx files (ie. the Powerpack files). I assumed that RET would "detect" them automatically upon restart, but that didn't work. I don't know what purpose those Missionforex archive files serve, really.

 

Shawn

Link to comment
Share on other sites

  • 2 weeks later...

OK thanks Candyman. I just mentioned that cause in the pdf Users Manual for the WECS indicator, it had said this:

 

 

"Trouble Shooting Guide for Displaying the WECS Indicator

--------------------------------------------------------

 

If you are unable to display the WECS indicator within the Refined Elliott Trader

software, check the following:

 

Do you have the latest version of RET installed?

To display the WECS indicator, you will need to be running RET version 1.5.x or

greater.

To upgrade, fire up RET, and select: Tools | Check for Software Upgrades. Then

follow the instructions.

 

Do you have a 2007 PowerPack installed?

WECS uses the additional information found within the 2007 series of market specific

PowerPacks for RET. It does not work with the default database that comes standard

with RET. This is because the new PowerPacks contains the additional information

that WECS needs to display the indicators.

You can check to see what PowerPacks you have installed/licensed by viewing the

Help | About window within RET.

Notice the PowerPack licenses in the section on the right."

 

 

Cheers

Shawn

Link to comment
Share on other sites

OK thanks Candyman. I just mentioned that cause in the pdf Users Manual for the WECS indicator, it had said this:

 

 

"Trouble Shooting Guide for Displaying the WECS Indicator

--------------------------------------------------------

 

If you are unable to display the WECS indicator within the Refined Elliott Trader

software, check the following:

 

Do you have the latest version of RET installed?

To display the WECS indicator, you will need to be running RET version 1.5.x or

greater.

To upgrade, fire up RET, and select: Tools | Check for Software Upgrades. Then

follow the instructions.

 

Do you have a 2007 PowerPack installed?

WECS uses the additional information found within the 2007 series of market specific

PowerPacks for RET. It does not work with the default database that comes standard

with RET. This is because the new PowerPacks contains the additional information

that WECS needs to display the indicators.

You can check to see what PowerPacks you have installed/licensed by viewing the

Help | About window within RET.

Notice the PowerPack licenses in the section on the right."

 

 

Cheers

Shawn

 

Hi Shawn, are you using which version that can update to the new version? because i can not update it, mine v 1.13.2..can you share the lastest version?. thanks.

Link to comment
Share on other sites

Hi nurfirdaus, Candyman said he will make a new full install with the working WECS indi and you can then just delete any other version of RET you had. So just patience for now!

 

Cheers

Shawn

 

 

 

Hi Shawn, are you using which version that can update to the new version? because i can not update it, mine v 1.13.2..can you share the lastest version?. thanks.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...