Jump to content

Megadroid Pro (links first post)


Recommended Posts

Re: Megadroid Pro

 

Live on Alpari UK Micro account last night:

 

14666293 2009.08.17 22:25 sell 0.02 usdcad 1.10723 1.11479 1.10150 2009.08.17 23:30 1.10714 0.00 0.00 0.00 0.16

14666302 2009.08.17 22:25 sell 0.02 usdjpy 94.486 94.914 93.886 2009.08.18 00:26 94.485 0.00 0.00 -0.01 0.02

14666541 2009.08.17 22:58 sell 0.01 eurjpy 133.050 134.288 132.550 2009.08.17 23:40 132.989 0.00 0.00 0.00 0.64

14666588 2009.08.17 22:59 sell 0.01 gbpusd 1.63461 1.64091 1.62861 2009.08.17 23:36 1.63398 0.00 0.00 0.00 0.63

14666602 2009.08.17 22:59 sell 0.02 usdcad 1.10850 1.11244 1.10350 2009.08.17 23:19 1.10723 0.00 0.00 0.00 2.29

14666625 2009.08.17 23:00 sell 0.01 gbpusd 1.63479 1.64709 1.62979 2009.08.17 23:36 1.63410 0.00 0.00 0.00 0.69

14666696 2009.08.17 23:00 sell 0.01 eurjpy 133.097 133.735 132.497 2009.08.17 23:35 133.030 0.00 0.00 0.00 0.70

14667857 2009.08.17 23:40 buy 0.01 eurjpy 132.958 132.487 133.458 2009.08.18 01:03 132.964 0.00 0.00 0.01 0.06

14667889 2009.08.17 23:45 buy 0.01 gbpusd 1.63350 1.62733 1.63850 2009.08.18 00:46 1.63351 0.00 0.00 0.01 0.01

14668828 2009.08.18 00:33 sell 0.01 eurchf 1.51823 1.52273 1.51223 2009.08.18 05:15 1.51822 0.00 0.00 0.00 0.01

 

41 pips profit. I'm using the last version of MegaDroidPro_XE.

Link to comment
Share on other sites

  • Replies 2.1k
  • Created
  • Last Reply

Top Posters In This Topic

Re: Megadroid Pro

 

I've a crash this morning with xx2 version. Here is the screenshot : http://www.mediafire.com/imageview.php?quickkey=dziwmzwz5qg&thumb=5

 

There is no solution for this version ? Because she's good and take me good results !

 

rmbpmendes, what the difference between XE version and xx2 ? There is crash with XE ? Can you give me the share link ? What the trading hours ? Because you have trade around 22h but not me...

 

Thanks !

Link to comment
Share on other sites

Re: Megadroid Pro

 

41 pips profit. I'm using the last version of MegaDroidPro_XE.

 

I'm up $20 from last night on Alpari UK (MDPXEv1.1). There was scary situation with the EURCHF which nearly missed breakeven, so I closed it manually JUST off break even. GBPUSD and USDCAD were stragglers, blasting back the other way for a while, but eventually came into breakeven profit.

 

I just wish the spreads were lower during the Asian session, as it sure would help make the Megadroid a little less vulnerable.

Link to comment
Share on other sites

Re: Megadroid Pro

 

last night. MIG (gmt+2)

 

with bbr_v07 :

 

short usdchf + 9 pips

short eurcad + 1 pips

Long usdchf + 9 pips

short usdjpy + 2 pips

short usdchf + 3 pips

Long gbpchf + 15 pips

short eurcad + 1 pips

short eurchf - 4 pips

 

with MD1.11a :

 

Long gbpusd + 10 pips

Short eurusd - 36 pips (SL)

short eurcad + 1 pips

Link to comment
Share on other sites

Re: Megadroid Pro

 

Live on Alpari UK Micro account last night:

 

14666293 2009.08.17 22:25 sell 0.02 usdcad 1.10723 1.11479 1.10150 2009.08.17 23:30 1.10714 0.00 0.00 0.00 0.16

14666302 2009.08.17 22:25 sell 0.02 usdjpy 94.486 94.914 93.886 2009.08.18 00:26 94.485 0.00 0.00 -0.01 0.02

14666541 2009.08.17 22:58 sell 0.01 eurjpy 133.050 134.288 132.550 2009.08.17 23:40 132.989 0.00 0.00 0.00 0.64

14666588 2009.08.17 22:59 sell 0.01 gbpusd 1.63461 1.64091 1.62861 2009.08.17 23:36 1.63398 0.00 0.00 0.00 0.63

14666602 2009.08.17 22:59 sell 0.02 usdcad 1.10850 1.11244 1.10350 2009.08.17 23:19 1.10723 0.00 0.00 0.00 2.29

14666625 2009.08.17 23:00 sell 0.01 gbpusd 1.63479 1.64709 1.62979 2009.08.17 23:36 1.63410 0.00 0.00 0.00 0.69

14666696 2009.08.17 23:00 sell 0.01 eurjpy 133.097 133.735 132.497 2009.08.17 23:35 133.030 0.00 0.00 0.00 0.70

14667857 2009.08.17 23:40 buy 0.01 eurjpy 132.958 132.487 133.458 2009.08.18 01:03 132.964 0.00 0.00 0.01 0.06

14667889 2009.08.17 23:45 buy 0.01 gbpusd 1.63350 1.62733 1.63850 2009.08.18 00:46 1.63351 0.00 0.00 0.01 0.01

14668828 2009.08.18 00:33 sell 0.01 eurchf 1.51823 1.52273 1.51223 2009.08.18 05:15 1.51822 0.00 0.00 0.00 0.01

 

41 pips profit. I'm using the last version of MegaDroidPro_XE.

 

Could you please add what logic you are using for EURJPY, USDJPY, USDCAD and GBPUSD? I am on Alpari UK Micro Live also and would like to test these additional pairs.

Link to comment
Share on other sites

Re: Megadroid Pro

 

Here is the version that I'm running:

 

I'm running it with the auto GMT. It seems to be +2

 

Here's an updated version of MegadroidPro XE (now v1.1)

 

Included is a fix to Don's MaxSpread input. It is now a double, and not an int, and it will be automatically converted to something functional if you give it a positive value. You no longer need to multiply by 10 on a 5-digit broker.... but you can manually set the decimal place for your own fine-tuning if you have 5-digits. (Naturally enough, the decimal place will be useless on a 4-digit broker.)

 

You can now also check the status of the MaxSpread from the chart you place the EA on too.

You will either be told that it's disabled, default, or the value that you've set the max spread to.

(Note that the MaxSpread, if you set it to a positive value, will be active on BOTH strategies... which is why the display won't show a value if you simply use the defaults. MaxSpreads sometimes differ between supported pair strategies.)

 

I could have also turned the individual logic max spreads into doubles too, but I didn't want to mess with the system too much.

 

Also included collinsmith's fix, and a few other tweaks and cleanups to the inputs. Someone who watches a lot of TV may note the significance of the new "magic numbers" ;)) Of course they do not affect how the EA trades.

 

I also cleaned up the readme.

 

In the package I have inlcuded presets for the other supported pairs, loaded into the CUSTOM logic settings, in case you want to tweak the defaults through optimization or something.

 

Let me know of any problems.

 

hxxp://[email protected]/file/124307161/4e28200d/MegadroidPro_XE.html

Same password as before. It's the name of this website. Between the http:// and the .com ;)

 

Now all we have to do is generate a pile of good CUSTOM logic presets for other pairs.....

 

This is the major difference:

from the "Read Me":

 

" The EA no longer communicates over the internet, or even with the original

DLL file. You will still need to "Allow DLL imports" however, as

kernel32.dll is accessed to get process IDs and system time information."

 

thanks Rio! I´ll give it a try. :)

 

This version also allows you to set your own trading times... That's the reason why I've that range of hours.

Link to comment
Share on other sites

Re: Megadroid Pro

 

Here is the version that I'm running:

This version also allows you to set your own trading times... That's the reason why I've that range of hours.

 

So does bbr_07...

 

XE is just an extention of bbr_v07. The MAJOR difference with XE is that it lets you use other logics on supported pairs, lets you develop your own logic in optimization, and use your own custom logic on any pair you like.

 

Other than that, they are not too different. They are both "unplugged" from the megadroid.dll but will need to be allowed to use DLLs because kernel32.dll gets called for the GMT auto setting.

 

Here's a working link to XEv1.1:-

 

hxxp://[email protected]/file/124315018/ee1e8562/MegadroidPro_XE.html

Link to comment
Share on other sites

Re: Megadroid Pro

 

rmbpmendes, have you crash with the XE version ?

What settings you use for your live account ? Have you Override Trades on true or false ? If true, what's hours ? I don't understand this setting..if you can explain to me.. !

 

Me, with ee2 version I work with this pairs and logic :

 

USDJPY : Logic 4

GPBUSD : Logic 4

EURJPY : Logic 1

GBPCHF : Logic 4

USDCAD : Logic 2

EURCHF : Logic 2

EURGBP : Logic 3

USDCHF : Logic 4

EURUSD : Logic 1

 

I've very good results with this pairs & logic and with version ee2 of Don.

 

And you, what logic you use for the same pairs ?

 

Thanks !

Link to comment
Share on other sites

Re: Megadroid Pro

 

So does bbr_07...

 

XE is just an extention of bbr_v07. The MAJOR difference with XE is that it lets you use other logics on supported pairs, lets you develop your own logic in optimization, and use your own custom logic on any pair you like.

 

Other than that, they are not too different. They are both "unplugged" from the megadroid.dll but will need to be allowed to use DLLs because kernel32.dll gets called for the GMT auto setting.

 

Here's a working link to XEv1.1:-

 

hxxp://[email protected]/file/124315018/ee1e8562/MegadroidPro_XE.html

what the password??? please

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...