ampf Posted Thursday at 09:09 AM Report Share Posted Thursday at 09:09 AM Can anyone unlock Multi-Timeframe Fu$ion from https://ninza.co/product/multi-timeframe-fusion https://limewire.com/d/7MDeE#KJluGxIPU9 https://limewire.com/d/aSJp1#VxrOn5yv38 These were the files I have found Thank you ⭐ fryguy1, kimsam, ⭐ aniketp007 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
fxtrader99 Posted Thursday at 02:20 PM Report Share Posted Thursday at 02:20 PM I have attached multi timeframe trend labels indicator. This shows the trend for multiple time frames as text in the chart panel. This may help with what you want. MTFTrendLabels.zip ⭐ goldeneagle1, ⭐ rcarlos1947, ⭐ fryguy1 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
ampf Posted Thursday at 03:14 PM Author Report Share Posted Thursday at 03:14 PM @fxtrader99 I thank you for the share unfortunately its not exactly what I was looking for. The interest on multi-timeframe fu$ion is that it can use time-frames that are not only minutes but also can be integrated on strategies. However once again thank you. Quote Link to comment Share on other sites More sharing options...
atljam Posted Thursday at 04:46 PM Report Share Posted Thursday at 04:46 PM (edited) yes I second that, the ninza co Multi-Timeframe Fu$ion if we can get some help removing the agile.net protection. Edited Thursday at 04:48 PM by atljam Quote Link to comment Share on other sites More sharing options...
⭐ mangrad Posted Thursday at 05:41 PM Report Share Posted Thursday at 05:41 PM Agiledotnet is the hard one. Quote Link to comment Share on other sites More sharing options...
Ninja_On_The_Roof Posted Thursday at 06:14 PM Report Share Posted Thursday at 06:14 PM 9 hours ago, ampf said: Can anyone unlock Multi-Timeframe Fu$ion from https://ninza.co/product/multi-timeframe-fusion https://limewire.com/d/7MDeE#KJluGxIPU9 https://limewire.com/d/aSJp1#VxrOn5yv38 These were the files I have found Thank you Try it and let me know if this works. https://limewire.com/d/ANeh1#dXdNDyU5f4 The trick is to replace the Resource file when asked during installation. ⭐ mangrad and ⭐ goldeneagle1 2 Quote Link to comment Share on other sites More sharing options...
ampf Posted Thursday at 06:53 PM Author Report Share Posted Thursday at 06:53 PM 36 minutes ago, Ninja_On_The_Roof said: Try it and let me know if this works. https://limewire.com/d/ANeh1#dXdNDyU5f4 The trick is to replace the Resource file when asked during installation. I have done just that despite is never too much remember, but after import the indcator, replace the resource file an restart ninjatrader I get an empty line as can be seen on the attached image. Did you successfuly installed the indicator? If you did I don't know what I can be doing wrong on my end. Quote Link to comment Share on other sites More sharing options...
Ninja_On_The_Roof Posted Thursday at 10:41 PM Report Share Posted Thursday at 10:41 PM 3 hours ago, ampf said: I have done just that despite is never too much remember, but after import the indcator, replace the resource file an restart ninjatrader I get an empty line as can be seen on the attached image. Did you successfuly installed the indicator? If you did I don't know what I can be doing wrong on my end. I am assuming that you already have some other NinzaCo indicators on your computer, yes? Quote Link to comment Share on other sites More sharing options...
kimsam Posted Thursday at 11:34 PM Report Share Posted Thursday at 11:34 PM try this .. not tested. https://limewire.com/d/KR1Xa#819lJ6LXrW TRADER, ⭐ goldeneagle1, fxtrader99 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
ampf Posted 15 hours ago Author Report Share Posted 15 hours ago 14 hours ago, Ninja_On_The_Roof said: I am assuming that you already have some other NinzaCo indicators on your computer, yes? I have tested both ways, with other ninza indicators and then I removed all them and installed only multi-timefram fu$ion but in both situations I got the same result. Quote Link to comment Share on other sites More sharing options...
ampf Posted 15 hours ago Author Report Share Posted 15 hours ago 13 hours ago, kimsam said: try this .. not tested. https://limewire.com/d/KR1Xa#819lJ6LXrW I don't know about others, but I copied the file to de folder but is not being listed on the indicators. Quote Link to comment Share on other sites More sharing options...
⭐ RichardGere Posted 15 hours ago Report Share Posted 15 hours ago I copied to bin/ custom folder. But I could not find the indicator on the indicator list. I am using NT 8.0.22 Quote Link to comment Share on other sites More sharing options...
atljam Posted 15 hours ago Report Share Posted 15 hours ago 14 hours ago, kimsam said: try this .. not tested. https://limewire.com/d/KR1Xa#819lJ6LXrW still not showing in available indicators but looking at the dll most all the source code is exposed in this dll Quote Link to comment Share on other sites More sharing options...
Ninja_On_The_Roof Posted 6 hours ago Report Share Posted 6 hours ago (edited) On 6/12/2025 at 11:53 AM, ampf said: I have done just that despite is never too much remember, but after import the indcator, replace the resource file an restart ninjatrader I get an empty line as can be seen on the attached image. Did you successfuly installed the indicator? If you did I don't know what I can be doing wrong on my end. Hi, Try this way... First you just import the ThunderZilla. When asked to replace files, just click YES. This is the ONLY time when you click YES. Then import Fusion. This time, click NO for everything. https://limewire.com/d/OrzxY#kvkp1ghFoI From this point on forward, you just now import all other NinzaCo indicators without clicking YES to anything. Hope this shall sort things out for you. Edited 5 hours ago by Ninja_On_The_Roof Quote Link to comment Share on other sites More sharing options...
Ninja_On_The_Roof Posted 4 hours ago Report Share Posted 4 hours ago Hello, Some, not all, but quite enough to make you a millionaire trading.🥰 Just remember to follow the sequence. Import ThunderZILLA first. Click YES to replace file when asked. (This of course, if you do have other previous NizaCo indicators on your PC) The now continue to import others, whichever you desire, but be sure to click NO to everything afterwards. I have tested them on my end, just to make sure they work on my charts. https://limewire.com/d/eSzOf#Lo2JIEgdhY raj1301 and fxtrader99 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.