Jump to content

Recommended Posts

Posted
cryptolicensing--in short this is what you need to know about NT dll's from vendors....they can use obfuscation and/or encryption. This is available through many different vendors (some free, some pay). Some of the really good obfuscation/encryption vendors will encode the dll in such a way as when you try and reverse engineer it in various programs, it will cause those programs to throw errors/overflow--which you can guess makes it a lot more difficult for individuals to reverse engineer their scripts...it kind of sounds like they may have taken this approach when they built their software, which means you really need to have an above average knowledge of decoding scripts.
  • Replies 494
  • Created
  • Last Reply

Top Posters In This Topic

Posted (edited)

Hi,

 

Everything is Crackable, This Indicator got cracked successfully , now fiddler is also not required and that fake error is also solved.

 

Download Crack Below

bit(dot)ly/111RkdP

 

password is my username:

 

You Must Have Original Dlls in Custom Folder

 

And Now Add Above Crackable Dll in Custom Folder

 

Open Any Chart Add "OFACracker" Indicator

 

Click on OFACrack now button

 

1.First Time it will say unable to crack,

2.press it again then it will get cracked successfully.

 

this is most advanced method of cracking where we are not doing anything to Original Dlls, we are modyfing it during runtime.

this method is modifying License Check Algorithm and it is happening inside Memory.

 

now your Indicator will work fine.

 

You Need to crack it every time you need to use OFA.

 

I hope you like this and also click on thanks if you are downloading.

 

 

note:-

The author is not responsible for the bad usage of this product.

This is for EDUCATIONAL AND EVALUATION PURPOSES ONLY.

Use at your own risk.

If you like this program, please support the developer and buy it !! & get licensed Version.

 

warning:-this crack will stop working after 31-Oct-13.

 

Regards,

Stockpro

Edited by stockpro
Posted

Stockpro - you are really really bad a**!!!!!!

 

Thanks much for doing this.

 

Hi,

 

Everything is Crackable, This Indicator got cracked successfully , now fiddler is also not required and that fake error is also solved.

 

Download Crack Below

bit(dot)ly/111RkdP

 

password is my username:

 

You Must Have Original Dlls in Custom Folder

 

And Now Add Above Crackable Dll in Custom Folder

 

Open Any Chart Add "OFACracker" Indicator

 

Click on OFACrack now button

 

1.First Time it will say unable to crack,

2.press it again then it will get cracked successfully.

 

this is most advanced method of cracking where we are not doing anything to Original Dlls, we are modyfing it during runtime.

this method is modifying License Check Algorithm and it is happening inside Memory.

 

now your Indicator will work fine.

 

You Need to crack it every time you need to use OFA.

 

I hope you like this and also click on thanks if you are downloading.

 

 

note:-

The author is not responsible for the bad usage of this product.

This is for EDUCATIONAL AND EVALUATION PURPOSES ONLY.

Use at your own risk.

If you like this program, please support the developer and buy it !! & get licensed Version.

 

warning:-this crack will stop working after 31-Aug-13.

 

Regards,

Stockpro

Posted
Sorry guys, don't work to me there's something wrong.!!!

 

please see this snapshot http://my.jetscreenshot.com/20438/20130718-bzbv-82kb

 

thank you

Make Sure you Are Running Ninja as administrator ,

and it should work

otherwise try removing all dll's from custom folder and add OFA Dll's and Ofa Cracker And Then try

but before removing keep backup of your custom folder

and also you can try opening any indicator for editing inside ninjatrader and compile it.

your problem may solved by following above suggestions

Posted
Make Sure you Are Running Ninja as administrator ,

and it should work

otherwise try removing all dll's from custom folder and add OFA Dll's and Ofa Cracker And Then try

but before removing keep backup of your custom folder

and also you can try opening any indicator for editing inside ninjatrader and compile it.

your problem may solved by following above suggestions

 

Tied everything above, still have the same problem as in http://my.jetscreenshot.com/20438/20130718-bzbv-82kb

Posted
Works OK, would be nice to know what mastertrader7 said above...

 

do you run fiddler? I followed the stockpro's instruction but didn't work, don't know what did I do wrong

Posted (edited)
Make Sure you Are Running Ninja as administrator ,

and it should work

otherwise try removing all dll's from custom folder and add OFA Dll's and Ofa Cracker And Then try

but before removing keep backup of your custom folder

and also you can try opening any indicator for editing inside ninjatrader and compile it.

your problem may solved by following above suggestions

 

 

Would the data feed be of any issue? It says cracked but bars remain normal candlesticks. I'm using CQG

Edited by priceless_knowledge
Posted (edited)

Sorry but I need help from you. I'm also in this situation http://my.jetscreenshot.com/20438/20130718-bzbv-82kb..... 2nnd step > click on OFA cracker (above bottom). After this I don't see any plot on the charts. I also use CQG.

 

 

OOoops reset all... now after imported OFA.dll and paste OFAcracker.dll in \\\bib\custom when I push "CrackOFAnow" button I have "CrackFailed-Try again" return.

Edited by laser1000it
Posted
On that VCA indicator i understand RB/RS (responsive buying/selling), BIT/SIT (buyers initiating trade /sellers), but what does NAU / NAD mean? Also has someone more information what colors the grey boxes in detail, are these point of controls?
Posted
Hi,

 

Everything is Crackable, This Indicator got cracked successfully , now fiddler is also not required and that fake error is also solved.

 

Download Crack Below

bit(dot)ly/111RkdP

 

password is my username:

 

You Must Have Original Dlls in Custom Folder

 

And Now Add Above Crackable Dll in Custom Folder

 

Open Any Chart Add "OFACracker" Indicator

 

Click on OFACrack now button

 

1.First Time it will say unable to crack,

2.press it again then it will get cracked successfully.

 

this is most advanced method of cracking where we are not doing anything to Original Dlls, we are modyfing it during runtime.

this method is modifying License Check Algorithm and it is happening inside Memory.

 

now your Indicator will work fine.

 

You Need to crack it every time you need to use OFA.

 

I hope you like this and also click on thanks if you are downloading.

 

 

note:-

The author is not responsible for the bad usage of this product.

This is for EDUCATIONAL AND EVALUATION PURPOSES ONLY.

Use at your own risk.

If you like this program, please support the developer and buy it !! & get licensed Version.

 

warning:-this crack will stop working after 31-Oct-13.

 

Regards,

Stockpro

 

Anyone can reapload the crack, please

Posted
Sorry but I need help from you. I'm also in this situation http://my.jetscreenshot.com/20438/20130718-bzbv-82kb..... 2nnd step > click on OFA cracker (above bottom). After this I don't see any plot on the charts. I also use CQG.

 

 

OOoops reset all... now after imported OFA.dll and paste OFAcracker.dll in \\\bib\custom when I push "CrackOFAnow" button I have "CrackFailed-Try again" return.

 

you have to click "crack now" two times to successfully get cracked

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...