scorpionidain Posted January 8, 2018 Report Share Posted January 8, 2018 All working fine on my side, stop loss are magenta dots from TAS Vega. fixed some minor issues in tas nt8 src. try out this https://www.forexupload.com/8Qe ⭐ laser1000it, Flash_Trader, ⭐ flipper26 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
kitwit Posted January 9, 2018 Report Share Posted January 9, 2018 fixed some minor issues in tas nt8 src. try out this https://www.forexupload.com/8Qe No luck. I tried this one (new one the link above), the indicators don't load at all. I reinstalled Ninja 8 and deleted all indicator and added cs file back the indicator folder and recompile. Doesn't show up as an indicator option to add in the charts. While i reverted back and use the the original cs NT8 file that you posted a while back, all the indicator loads correctly, only thing that doesn't work is for VEGA indicator( i am not able to see the stops magneta dots), the rest all work. Quote Link to comment Share on other sites More sharing options...
kitwit Posted January 9, 2018 Report Share Posted January 9, 2018 No luck. I tried this one (new one the link above), the indicators don't load at all. I reinstalled Ninja 8 and deleted all indicator and added cs file back the indicator folder and recompile. Doesn't show up as an indicator option to add in the charts. While i reverted back and use the the original cs NT8 file that you posted a while back, all the indicator loads correctly, only thing that doesn't work is for VEGA indicator( i am not able to see the stops magneta dots), the rest all work. Now i got the updated one to load, but still not able to see the VEGA stop loss magenta dots. Flash_Trader 1 Quote Link to comment Share on other sites More sharing options...
kitwit Posted January 9, 2018 Report Share Posted January 9, 2018 h t t p s : //ibb.co/gE52p6 see screenshot; also under stop lost in the databox it says n/a Quote Link to comment Share on other sites More sharing options...
scorpionidain Posted January 9, 2018 Report Share Posted January 9, 2018 h t t p s : //ibb.co/gE52p6 see screenshot; also under stop lost in the databox it says n/a http://ibb.co/kcKOCR These are the default setting I use and it works fine windo and Flash_Trader 2 Quote Link to comment Share on other sites More sharing options...
kitwit Posted January 10, 2018 Report Share Posted January 10, 2018 http://ibb.co/kcKOCR These are the default setting I use and it works fine it works now, for some reason in properties, where it says show stop lost; mine default setting was 0. i changed it to 1. and it shows. Thanks a lot for your help. Quote Link to comment Share on other sites More sharing options...
⭐ ibandrew88 Posted February 9, 2018 Report Share Posted February 9, 2018 https://www.sendspace.com/file/1ujl7e Hello guys GM Can you please reupload TAS for MT4 and its instructions to install? Thank you so much Quote Link to comment Share on other sites More sharing options...
Flash_Trader Posted February 9, 2018 Report Share Posted February 9, 2018 (edited) I just looked at the NT8 CS files upload a while back, and they dont work. There is no code is the cs scripts, when installed it refers out to a dll-FWIW Now to use these indicators: Vega is a 27-period EMA, with a 1.15 ATR Navigator is a TSI, setting: Short Period-13, Longer Period-25, Signal Period-7, all based on EMA Ratio: Is a Stochastic set a 9.3.3 Not sure about the Boxes, looks to be calculated from an RSI, so may not be Market Profile based at all I see that I did not load the 2.1b files, so may try that-BTW Great Work Edited February 9, 2018 by Flash_Trader amruta 1 Quote Link to comment Share on other sites More sharing options...
orfila Posted February 9, 2018 Report Share Posted February 9, 2018 Flash, as in the original nt7 files the scripts call a dll that is installed from the original package. For nt8, as long as you have installed the Nt7, then the scripts will work ( and do work ) since they call on the same nt7 dll. the boxes are based on a swingRSI indi were he makes a profile at the turning points ... Flash_Trader 1 Quote Link to comment Share on other sites More sharing options...
Tostao Posted February 10, 2018 Report Share Posted February 10, 2018 Flash, as in the original nt7 files the scripts call a dll that is installed from the original package. For nt8, as long as you have installed the Nt7, then the scripts will work ( and do work ) since they call on the same nt7 dll. the boxes are based on a swingRSI indi were he makes a profile at the turning points ... Orfila can I send you a private to ask you about reading the dll from mql4? pd: (orfila has exceeded their stored private messages quota...) Quote Link to comment Share on other sites More sharing options...
orfila Posted February 10, 2018 Report Share Posted February 10, 2018 I know nothing about mql4 ... sorry Tostao 1 Quote Link to comment Share on other sites More sharing options...
⭐ ibandrew88 Posted March 19, 2018 Report Share Posted March 19, 2018 Hello guys how are you? can u please help me and send me the MT4 files updated with updated instructions? i did everything as it was at the beggining but it does not load the said this computer is not supported Please help me thank you so much Quote Link to comment Share on other sites More sharing options...
scorpionidain Posted June 13, 2018 Report Share Posted June 13, 2018 https://mega.nz/#F!nuhGzTaY!ro3tlTttWj7qvkH3ABup2Q TTB course on TAS market profile Jeck, RICHI, agunes77 and 11 others 14 Quote Link to comment Share on other sites More sharing options...
ninja_on_da_roof Posted June 15, 2018 Report Share Posted June 15, 2018 hi, anyone has this for NT8 version? thanks. Quote Link to comment Share on other sites More sharing options...
mauro33 Posted June 15, 2018 Author Report Share Posted June 15, 2018 hi, anyone has this for NT8 version? thanks. https://www.forexupload.com/bws milind0712, ninja_on_da_roof, ylidor and 2 others 5 Quote Link to comment Share on other sites More sharing options...
ninja_on_da_roof Posted June 15, 2018 Report Share Posted June 15, 2018 (edited) Mauro33, Is there a step that I missed? I followed the instructions and replaced all the files in appropriate folders. Yet there is nothing showing in the "indicators" section for NT8. I then tried to import the zip file the regular way but it said the file is not compatible. Any help would be great. Thanks. **never mind, i found out i missed one step** thank you. Edited June 15, 2018 by ninja_on_da_roof Quote Link to comment Share on other sites More sharing options...
⭐ laser1000it Posted June 15, 2018 Report Share Posted June 15, 2018 It seems working well Quote Link to comment Share on other sites More sharing options...
scorpionidain Posted June 15, 2018 Report Share Posted June 15, 2018 Mauro33, Is there a step that I missed? I followed the instructions and replaced all the files in appropriate folders. Yet there is nothing showing in the "indicators" section for NT8. I then tried to import the zip file the regular way but it said the file is not compatible. Any help would be great. Thanks. **never mind, i found out i missed one step** thank you. It is in the source code form. You have to compile it. Quote Link to comment Share on other sites More sharing options...
traderretail Posted June 21, 2018 Report Share Posted June 21, 2018 install in NT7, then open script editor in nt7 and nt8 ... copy the Tas script, from nt7 to nt8 and compile ... run in 32 bits ... it worked for me Quote Link to comment Share on other sites More sharing options...
traderretail Posted June 21, 2018 Report Share Posted June 21, 2018 Thank you very much, I owe you a beer in Peru, you will have the additional tutorials of the rest of Tas indicators ... Quote Link to comment Share on other sites More sharing options...
Flash_Trader Posted July 5, 2018 Report Share Posted July 5, 2018 I have NT7 with TAS 1.8 and it is not saving any changes to the indicators or saving a template and it coming up with an error that it will not serialize. Which means it will not save any of the indicator changes or a template with TAS. Does anyone know how to fix this on Windows 10? Quote Link to comment Share on other sites More sharing options...
⭐ topstep Posted July 5, 2018 Report Share Posted July 5, 2018 NT7 HAS A LOT OF BUGS IN IT BUT I WAS RUNNING IT IN NT7 ,,,,I'M NOW USING NT8 AND IT RUNS PERFECTLY ,,,IF YOU HAVE TO RUN IT IN NT7 TRY RE-INSTALLING IT....I SWITCHED TO NT8 THIS WEEK AND I LOVE IT WITH THE TAS NT8 https://www.sendspace.com/file/6ta99y also running in windows 10 no problems .......... Flash_Trader and ⭐ nadjib 2 Quote Link to comment Share on other sites More sharing options...
Flash_Trader Posted July 6, 2018 Report Share Posted July 6, 2018 Hi Topstep, Thank you for the NT8 set. I found the issue, it was a bad TAS 64bit file, so it was only working on 32. I still need to use NT7 since I use market profile and vol. profile and am too lazy to buy the NT8 versions and switch. I'll do it when forced for now. Thank you NT7 HAS A LOT OF BUGS IN IT BUT I WAS RUNNING IT IN NT7 ,,,,I'M NOW USING NT8 AND IT RUNS PERFECTLY ,,,IF YOU HAVE TO RUN IT IN NT7 TRY RE-INSTALLING IT....I SWITCHED TO NT8 THIS WEEK AND I LOVE IT WITH THE TAS NT8 https://www.sendspace.com/file/6ta99y also running in windows 10 no problems .......... Quote Link to comment Share on other sites More sharing options...
agunes77 Posted July 7, 2018 Report Share Posted July 7, 2018 what are you using as VOL ? Quote Link to comment Share on other sites More sharing options...
⭐ topstep Posted July 7, 2018 Report Share Posted July 7, 2018 what are you using as VOL ? I'm using all the tas indicators . Watch all the videos on youtube and go to there site and sign up for the free webinar they are giving on how to use their indicators. https://tasmarketprofile.com/learn/ agunes77 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.