tradernate

While you decide your speed...We will decide if we keep you here.....If you expect to get help do not act like a immature kid....because we do not help people who only take and have an attitude. Keep up the junk and you will be gone-Nate

This is a ****ing s*** question. I do not care about you. I decide my speed

Ok..this works...i tried it. Remove all the ana indicators with NT7 shut down, load the BB indicators (x86 dll and x64 dll) to the custom folder. Start NT7, go to edit indicator....choose any small indicator to open, then compile. You should get 4 ana errors as Admis stated. Load the missing indicators and re-compile. I worked for me, then reloaded the rest and compiled with no errors. Hope that helps.

this should not work if importing function doesnt work

If there is a conflict...unzip the indicators and place the x86 and x64 indicator in the custom folder with NT7 NOT running. Once the indictors are copied and pasted into the custom folder, restart NT7 and they should work.

The BBTC system is based on free available ana moving averages. Originally the Bollinger Bands are based on SMA and std. Deviation. (below you can see the original part of BB code). In the BBTC release you can choose the type of base average . Most of us have already installed ana indicators and that's the reason of conflicts.

EXP the error may be due to a file that has a same name as the one of the .cs being imported from the .dll. Check your log as see if a error comes up, or check a known indicaor in the edit indiactor scrtion and compile and see what is the error.

Thanks Yama, but importing issue:

 

http://content.screencast.com/users/SN2005gl/folders/Jing/media/2a4dd9a7-b32d-4f40-a240-86e519de08ec/2014-08-16_1924.png

Hi Jane, the right line indi is a 50 SMA. When possible it would be great for the settings on the 2 oscillators since I like to use lagging indicators to help see divergences when I read price and volume...thats just me. I do not use RenkoSpectrum bars, just been using Hybridrenko, and starting to like them, better then range or no gap.

Hi Admis

Thanks a lot- that is a very good idea- you can see very clear how the market goes up but volume goes down, now that does not mean anything YET- we need to see a doji with high volume that will tell us that sellers entered the market.

Nate- that indi is just rightline moving average- the rest is garbage- i put it there just for fun, you really dont need anything other than navi and renko to give you the signal.

p.m me if you want.

Jane

 

http://i.imgur.com/sAwC1hy.jpg

Try this: https://www.sendspace.com/file/pv8nh4

please re-up...

Yamantaka, the new rule of thumb for vendors...should be a standard for all. But, who does that anymore....I really know no trainer who actually does that. Everyone that I have seen are 1. Never have certified/verified trades by a professional CPA, and when days are posted seem to be almost random. It kills me to see how people allows these so-called trainers to still be in business by showing really worthless videos...for a while I was one of these people.

My new rule of thumb to consider vendors who run a Live trading room is this: If they don't post their called trades accurately on the website, I have no interest, period. Life's too short to chase the shadow of vending clowns.

Just checked this link its still good-Nate

For those who want the full set without volume indicator that is RT only anyway....rest is complete

 

https://www.sendspace.com/file/jblaqm

 

QUOTE=V2xvix;334543]please, re-upload the link

 

regards,

Hi Jane, I just wanted to know if anybody knows his setup settings....I liked how it was laid out out. I liked how his volume was plotting. Not following...No going to pay 5K for the ES. mI sure not happy about his $$ mgt. out the box. I scalp but I try for a 1:1 RR at worst when I trade. I have tried to push it up to 350 per day from 250 and I have not been trading great. I miss the fall/spring follow thru volume, but have been trying a little more for the summer to get ready for Sept. and on.-Nate

not sure you should follow a trader who trades 1 minute chart...

not going to say anything else but this reminds me of someone else that was posting amazing results...

Mike Bridg@s

Change @ to a e

Here is a video...anyone know MACDs settings and what volume is being used? I do not trade the ES, but this could change my thoughts on this...

I will tomorrow..with indicators

Hi Nate. Can you provide a chart template for the setup?

Try Infinity (direct) for those prices on the DOM and Sierra Charts...is my second platform...again, the key was working the 2 back and forth to match each others prices.

Nate, who is giving $2.40 (all in, RT including the kitchen sink) for ZN/ZB? What datafeed are you using at both brokers?

I did not test it on replay...only did a visual...since thats how I trade...I do not use the Renko Spec 2.0 bars....but slippage has to be at least 1 tick in and out on replay.

Use bars and MA cross for signal....then wait....wait for a pullback to MA for support, or take next continuation bar cross. Yellow bar to Blue-long, or red for short. The key it taking trades based on S/R of the 62 EMA. Best trades happen when price hits the MA as a pullback, then resumes the trend. I use Market Profile to see where possible Longer term S/R areas are for probable targets.

are the entry signals lagging ? slippage ?

For those who want the full set without volume indicator that is RT only anyway....rest is complete

https://www.sendspace.com/file/jblaqm

QUOTE=V2xvix;334543]please, re-upload the link

regards,

Its a DLL...load into Custom folder, the re-start NT...under PBF...2 types of bars I used PBF_PB_Direction, set to length of 17

https://www.sendspace.com/file/jblaqm

@tradernate, please share your PBF

I used PBF (Paint Bar factory) 13/17HMA directional bars, EMA 62 as trend on a SR2.0 Bars at 4-1. The MA seems to help with chop on days like today. Use Acme Volume Profile to keep out the profilers way, and used a 50 fib to stay out of Fib chop areas. I just looked at the trades for a few days on the ugly YM and they looked good. BTW, when I look at a system, I always use the YM, if it looks good there then the TF, CL should be good also.

Same old song. Needs a long and strong trend. Unfortunately, those show up about 15% of the time. In non-trending markets, these things devour accounts.

Try this...has DLL's and .cs file...not tested.

https://www.sendspace.com/file/hkkcpd

You can get Eminis-3.50-3.57, Financials (Bonds)-2.40 Eenergies-3.97-4.02-All RT prices Out the Door.

Try to work another broker against each other....these are based on 20-30 cars a day.

To get those prices I used Infinity and Amp against each other...and then took accounts for both...so I have a backup....just did this within the last 2 months. Account was just under 10K for both so the 10K is bogus....they want traders who trade and will give a little away. I think traders can get deeper prices as volume increases.

If you deposit $10K, the round turn cost for ZN and ZB with TradingTechnologies feed is $2.64.

 

http://www.ampfutures.com/Cost_Calc.html

These files are from the membership section....some are the best of the best from a folder marked private...see if they help. Just a thought since I haven't used this, wondering how it compares to the OFA strategy? 2 files first one is 280 MB and he second is 60MB. Hope it solves some problems.

1. https://www.sendspace.com/file/4dbtlc

2. https://www.sendspace.com/file/dcwcci

Is there a manual or a video that explains what is going on there ?

In the youtube and his site videos he just describes whats is happening but its hard to understand what are we looking for and what kind of setting should we use.

I am not interested in the automated part of it- i want to see if this can help me as an extra tool to enter at a certain level etc.

Will this tool- strategy will display the volume spread better and clearer than other indicators like market balance or acme or gom ?

Did anybody try to use it in real time ?

Thanks in advance.

Traderbeauty-Jane

This video may help... training not on you t be https://www.sendspace.com/file/chxyaz

https://www.sendspace.com/file/wowsg2

Current strat pics: https://www.sendspace.com/file/osq5hn

Admis..you are correct...its not rocket science..but it is Ninja Science..LOL

You're welcome. As you can see it was not a rocket science...;)

It seems the numbers on the right side do not fill historically...but real time? I think if you replay it you may see that is the case.

is it possible im not seeing the order flow on the right side of the chart? something im missing?

 

im not getting any trades for some reason.. help anyone?

The auto trader and a few indi..and manuals: https://www.sendspace.com/file/kzc6li

Not tested

pls reupload.