chonpz

https://mega.nz/#!uCxUWIYK!OTifCvfqC8cFSRviWHdTOdFWWT3jpxzUhbxoGFcnRYw
 
press thanks. will post more

https://mega.nz/#!XP42RYyb!vci4DQCswXM1GGYhcNfHE6IvZeRr4ld5DM2RdKv9ndM

part 3
 
https://mega.nz/#!GTBl1QCS!40ViqyuI7OZ21NokJlJmiu4zRgPI64FwUlW6z-qqyfA

I was asked in a private message how to setup a couple lines of code in a NinjaScript Strategy to decide when a signal or combination of signals is valid to enter a trade.
 
If I get 10 Thanks to this message, I will post a short tutorial in the NinjaScript forum on how I create C# code templates to organize a Strategy. I'll do something simple like buy/sell when price closes above/below a moving average and then extend it to wait until price first closes through a moving average and then buy/sell on a pullback to that moving average. From that example, you will learn how to create a signal for either a bar close or any real-time tick coming into your Strategy and that should be enough to get you started coding your own ideas just by adding your code to specific sections.
 
If I get an overwhelming POSITIVE response from that, I will show you how to make your own popup Strategy options window so you can turn on and off many different signals in real-time from within one Strategy. This has real value to a discretionary trader who has a bunch of different ways to enter a trade and wants to quickly switch between them.
 
Correct me if I'm wrong but when I played around with the BloodHound trial a few years ago, I did not see a way to setup a BH visual template where I could take trades based on bar closes AND on a tick-by-tick basis within the same template. That is, once you set CalculateOnBarClose to false, you are in tick-by-tick mode to take trading signals but have lost the ability to trade bar closes also. This is certainly not the case in NinjaScript because all I have to do is put all of the bar close logic within an "if (FirstTickOfBar) { }" statement. If I'm wrong, that's really funny because it led me to come up with what I plan on showing you because it's fast, organized and easy to understand once you see what's going on.
 
Eventually, I can show you how to have your Strategy add to winners. I'm sorry, but I will never ever show anyone in code how to setup multiple targets to exit a trade. I believe in all-in/all-out with trading futures and adding to winners as they gain momentum because it is to your mathematical advantage to do one of these 2 basic methods. Adding to an initial losing position to get an average loss going forward, hoping it turns into a winner or starting with a heavy position and then lightening it more and more as you become more profitable makes no mathematical sense to me. I have spent enough time in my life in miserable futures positions to support my opinion.
 
One last thing:
 
If you want professional quality coding than you go with people who spend the majority of their time developing and testing software and you pay them (not to be confused with people who actually trade successfully because those kinds of people usually don't 9 times out of 10). I'm focused on trading so I don't go above and beyond what I need in my own code to get something very specific to function. Software products have to please a very wide audience. I have the luxury of being able to code only what I want. Big difference, so please, no negativity because I know this will take hours and hours of my time to present to you the template of logic to make any signal easy to add to an existing Strategy once it's setup with "boilerplate code".
 
BTW, on a completely separate topic, if anyone here has an original 5.2 version of an old NinjaTrader install file (.msi file), I would be very greatful if you posted a link to it. I've searched all over and couldn't find one.

so last for now but you should know that i just shared a HUGE amount of information with you in this live right now example- i am not going to chew it up for you or give you all the gory and fine details- i am not getting paid for that.
look at the renko 1- we got a perfect short right at the arrow i drew BEFORE the market got there - it went down but now it goes up again and its making A HIGHER LOW- you see that- RUN AWAY - exit your shorts and wait.
ok- thats enough for tonight- continuing with wykoff lol
take care
jane
 
http://i.imgur.com/r5sqe3r.jpg

Is this the one?
https://www.sendspace.com/file/13zquc

For all Ichimoku traders.
 
NinZa Superior Ichimoku
 
https://www.forexupload.com/35b
 
Enjoy it!

Here is the free Delta Surge indicator from Mike Valtos of orderflows.com. As Mike says on his site "Introducing the Orderflows Delta Surge indicator which was created to help traders understand and analyse order flow delta. Delta is the difference between the volume traded on the offer minus the volume traded on the bid in a particular bar.
 
Each bar will have a delta number. Delta will either positive or negative and on rare occasions it can even be zero.
There is not much information on trading order flow delta available on the market as most traders aren’t even aware of order flow delta, let alone thought of trading with it.
But delta is a great tool for traders. However like every tool, it has it uses. You can’t build a house with just a hammer, you need other tools to finish the house. Trading is the same way, to survive in the markets you need different tools to be used at different times.
When a trend is healthy, it builds on itself. Volume will increase slowly, as new buyers are drawn into the move.
Delta information used to only be available to order flow traders, however now you can analyze the delta using your favorite bar chart! Think about that
for a minute. Now you can use your own chart with your other indicators and add order flow delta analysis to it. There is no need for you to learn order flow. However I do think to get the maximum out of delta you really should be using an order flow chart because it will allow you to see what the market is doing inside the bar. Order flow gives you a x-ray vision into the bar to see is really happening between buyers and sellers.
 
 
http://www.orderflows.com/deltasurge/index.html
 
This indicator is free but was cleaned by Santoshji (many thanks Santosh).I have also included the Delta Surge User Guide pdf which sould help you with understanding and settings. Zip includes DeltaSurge_edu.zip (can be imported to NT7) and the Delta Surge User Guide. pdf.
 
 
Delta Surge.zip (624.48KB)
Download Page Link
https://www.sendspace.com/file/5avn32
 
Also to aid you in understanding Delta here is a recent Webinar by Mike Valtos on the Delta Surge.

Delta Surge Indicator From Orderflows Free Trading Software For NinjaTrader
Cheers:)

Here you go .. https://www.sendspace.com/file/rsu8b0

Hi, friend. In this post http://indo-investasi.com/showthread.php/27203-(REQ)-EDU-Requested-R-nch0-D1n3r0-ALL-PACKS-PRO-V-4-19-LATEST-version

like yall, I have looked for the perfect market profile tutorial blah blah balh....the best tutorial I have found so far is right here ....https://www.youtube.com/watch?v=B0kxlKPKtrY
from mark 30 to 31.20....amazingly that snippet finally brought it home for me....so simple but so effective..lol..people can't believe is that simple.... most of yal going to keep looking for the complicated 3-4 days long webinar with the very special secret sauce.....
 
seriously watch the vid 2-3 times bring up FDAX and do a replay watch the price action...etc....
this is what I picked up from the vid
1. trace your trend
2. look for trend break
3. enter short trade when price is below volume node..(vice versa for long)
4. Target is next node below....
5. Rinse and repeat.
 
anyway still watching and learning from Roland
let me know if this helps!!!

here another example.....https://www.youtube.com/watch?v=qnmeJrze5G0
 
watch from the beginning to mark 1:30 ...Here he did not draw a trend line but u can do that yourself ...he uses a moving average instead as a trend line (I think)
but notice that once the price breaks the upper volume node it goes straight the next volume node below and beyond....

like yall, I have looked for the perfect market profile tutorial blah blah balh....the best tutorial I have found so far is right here ....https://www.youtube.com/watch?v=B0kxlKPKtrY
from mark 30 to 31.20....amazingly that snippet finally brought it home for me....so simple but so effective..lol..people can't believe is that simple.... most of yal going to keep looking for the complicated 3-4 days long webinar with the very special secret sauce.....
 
seriously watch the vid 2-3 times bring up FDAX and do a replay watch the price action...etc....
this is what I picked up from the vid
1. trace your trend
2. look for trend break
3. enter short trade when price is below volume node..(vice versa for long)
4. Target is next node below....
5. Rinse and repeat.
 
anyway still watching and learning from Roland
let me know if this helps!!!

like yall, I have looked for the perfect market profile tutorial blah blah balh....the best tutorial I have found so far is right here ....https://www.youtube.com/watch?v=B0kxlKPKtrY
from mark 30 to 31.20....amazingly that snippet finally brought it home for me....so simple but so effective..lol..people can't believe is that simple.... most of yal going to keep looking for the complicated 3-4 days long webinar with the very special secret sauce.....
 
seriously watch the vid 2-3 times bring up FDAX and do a replay watch the price action...etc....
this is what I picked up from the vid
1. trace your trend
2. look for trend break
3. enter short trade when price is below volume node..(vice versa for long)
4. Target is next node below....
5. Rinse and repeat.
 
anyway still watching and learning from Roland
let me know if this helps!!!

oops wrong video...here is the right one https://www.youtube.com/watch?v=B0kxlKPKtrY

Wrote to Roland the Trader from Amsterdam and he basically answered my question...he uses...The Pro version from RanchoDinero.com

Wrote to Roland the Trader from Amsterdam and he basically answered my question...he uses...The Pro version from RanchoDinero.com

Wrote to Roland the Trader from Amsterdam and he basically answered my question...he uses...The Pro version from RanchoDinero.com

https://www.youtube.com/watch?v=Q7BD0HKdkos
starting at 18:52 ...see him tracing out profile at rotation and support/reistance areas....red line must be vpoc....seems to be very good tool.....what is the market profile tool he is using

next one is way simpler-that double bottom did not last much and failed to break the top which means that its going down and WILL BREAK that bottom now with a target of at least 1.272- which is what happened.
Just use the acme trend 1 and 2 default settings. renko spectrum 1-1 (DO NOT START TO LOOK FOR INDICATORS HERE-just do a search , work a little and you will find them all).I use right line colored ma.No need for anything else.
//////http://i.imgur.com/6COSIUi.png////
Enjoy
Jane
More coming us.
 
http://i.imgur.com/6COSIUi.png

Here it's the package of BWT NT7 7.0.3.6 PrecisionIndicators & PrecisionAutoTrader.
https://www.sendspace.com/file/fmre9h
 
Just import the .zip from inside of NT (before - remove all previous BWT releases).
Not only edu work was done. All of the monitoring and updating stuff was removed. Bars were extracted from the binary and prepared in the source form to allow for customization.
Default slot bars:
BWTPrecisionRange: Custom7 (this is exactly the RangeNoGap)
BWTUniRenko: Custom5
 
Additionally, the package includes: templates, workspaces, settings, which should be copied manually to the corresponding folders.
In the case of any installation issues - I'll answer only on serious requests.
 
IMHO: Nothing, special... The same expensive stuff since few years...

sauron can u please download repost link....tks

sauron can u please download repost link....tks

sauron can u please download repost link....tks

I have noticed a major interest in Acme Market Analytics in the forum and some requesting the various packages and associated templates. So as Darktrader Brad once told me "there's Gold in them Archive hills", I set myself on those DVDs again and managed to find these, and I arranged them for you. A zip file containing these 12 Acme Market Analytics packages
 
Acme Market Study Pack 4.0.3 (AnyNT).zip
Acme Market Study Pack 4.0.3 Pro-patched.zip
Acme TPO Pack Pro 4.1.0.1-pro patched.zip
Acme VolumeBreakdown 4.1.0.0 Pro (AnyNT).zip
Acme Volume Profile Pack 4.1.6 Pro (AnyNT).zip
 
Acme Market Study Pack 4.0.3 Pro (AnyNT).zip
Acme Trade Planning Pack 4.1.2.1 Deluxe patched.zip
Acme Volume Extras Pack 4.0.7 Deluxe (AnyNT).zip
Acme VWAP Pack 4.0.1 Free.zip
 
Acme Market Internals 4.0.6 Deluxe patched.zip
Acme Time And Sales Pack 4.1.6.1 Pro patched.zip
Acme Trend Analysis Pack 4.0.8 Free.zip
Acme Volume Impression Pack 4.1.1 (AnyNT).zip
 
I believe they were are all fixed/educated by one of our educators in the past, perhaps Zeraw, JMD or futuretrader, sadly no more with II forum but bless them all.Also I have included the relevant and associated templates for all the packages.I have tried to import all of them and they work.
Regarding the templates just unzip them and place them in
Ninjatrader7/templates/chart directory.
 
http://i62.tinypic.com/29gbs5d.jpg
 
AcmeBonanzapackages.zip (2.13MB)
https://www.sendspace.com/file/y1aefg

 
For those new to the Acme tools, here are some links you want to check out
http://www.ranchodinero.com/acme-screencasts/
http://www.ranchodinero.com/chart-templates/
 
Good trading to you and Cheers,:)
Cash