RichardGere

Welcome. Hope you find success in your endeavor. This forum is not as lively as it used to be but do make the best of it. There is Optuma 1.6 and Optuma 2.2 (offline version) here that you will probably find useful.

☺️

Your ASCII setting is not correct. If you look at the data file that I attached, there is a <time> column, which is not use and has values of 0. So your ASCII settings should be Date | Skip | Open | High | Low | Close | Volume | Hope that helps

I use AdvancedGet 7.8 EOD version and not AdvancedGet 9 because AdvancedGet 9 does have some instability. There is an AdvancedGet 7.8 intraday that accepts 60 minute data but till date, I have not found an educated version of it yet. This method that I am using was from more than a decade ago. It is using data from Metatrader 4. What you do is to attach an indicator (Agetdata.ex4) into a currency pair of 1 hour or 4 hours. What it does with the 1 hour or 4 hour chart is that it will convert each bar (1 hour or 4 hour bar) into EOD data and date it sometime into the past ie year 1930. Each daily data from 1930 onwards, represent 1 hour or 4 hours bar. This data is automatically saved into the MT4/Files directory. The saved file will automatically be added with a suffix of 60 or 240 so that it will identify the timeframe of the saved file. You can then use Advancedget to access this file. The chart will appear to show daily data starting from year 1930 but each bar is actually a 1 hour or 4 hour data. So what you see is that chart pattern suitable for Advanceget analysis but of course the X-axis is showing daily timeframe. I am not sure if I explained it clearly but I have attached the resultant data file for your review. I have attached a sample chart for audusd60. It shows a daily chart with a Daily X-axis starting from the year 1934. But the chart displayed is actually of the 60 minute chart from MT4. I do believe you can also do this for 15 min or 30 min but I didn't try it because things happen too fast for me at 15 min. For 1 hour chart, I only need to manually rerun AdvancedGet every hour to get a new updated bar. There is another indicator, CurrencyLoader.ex4, that does the same but I didn't use it because, it seems to have problem updating the files. I have attached it just in case you want to experiment with it. AGData.mq4 AUDCAD60.prn Currency_Loader V2.3.ex4

I am only do it for 60 minutes for MT4 data. It will need a add-in for MT4. Let me know if you are interested before I proceed

If I can remember correctly, if this is the first time you install from the telegram group, when you run the Motivewave after cracking it via the emulator, Motivewave will still ask you for the license key. You get the license key from the program Volume Tools Assistant 6.x which is downloaded from the same Telegram channel. You will first need to register an account before you enter the main page of the account where you can then get the license keys free for Motivewave, Bookmap, Quantower and Jigsaw (these keys are specific for your computer only). For NT8 and Sierra, these two are paid per month versions. For the link to the said Telegram channel, refer to my earlier post.

I am not sure if this will work but here is a message link; https://t.me/c/2130865682/304

Motivewave does have a study called Seasonality. But perhaps it isn't what you are looking for.

Yes it works, Thank You. Just testing it. Don't know how to use this software though.

Welcome Friend

That is good. Go ahead to install 2.2 into another program folder and copy OPCM.dll file to the program folder of 2.2. (There is no need copy any res.dat and cert.dat files to document folder since they were already installed with 1.6. Installing 2.2 will not remove them) Now you can login OFFLINE mode in 2.2 using the same ID and Password of 1.6. To share files, use 1.6 to download chart and save into a workbook. Then close 1.6 and open 2.2. Open workbook that you have saved previously. BUT you can actually run 1.6 and 2.2 simultaneously although most people says it can't be done. To run the two programs simultaneously (run 1.6 and 2.2 without having to close any of them) Here is the cut and paste from my post at TSRh (Run the emulator for 1.6 first) Click either the 1.6 or 2.2 icon repeatedly and quickly for about 6 to 8 clicks. Let's say start with 1.6 icon first. You should see one or two splash screens declaring the message "Optuma is already running. Would you like to close the other process and continue?" Click Yes to all splash screens. After this, you should see at least two login screens for version 1.6. Close all but leave one open. (If you don't see at least 2 login screens, then close everything and redo the clicking again) Now you can click the version 2.2 icon and the version 2.2 login screen will appear. You can now proceed to login either online or offline with the respective versions. To share static data (not realtime data) from version 1.6 to version 2.2 Save your workspace in version 1.6 after opening a chart. In version 2.2 open the same workspace. You will have what version 1.6 has saved. (reminder : In version 2.2, do not save workspace, just load only) I don't use the program but just tested it. Hope this work around will be helpful for others.

Send me all the files that you used to install and I will install it on my 3rd computer. Just want to make sure you have the right files.

Puzzle post does not appear to refer to installation but after installation and how data can be shared between 1.6 and 2.2. OPCM.dll file is to be copied into the program folder for version 2.2 only Anyway, suggest you solve the problem of installing and running 1.6 first. Hopefully, your computer does not belong to the rare group where it just wouldn't run Optuma properly. I can give suggestions here are there.

Sorry I couldn't find my old files to verify if my install was ok. Will check again later.

This is my personal opinion working with Sentient Trader. It is very involved and requires a lot of discretion and analysis. You spend a lot of time accessing whether the lowest price (trough) has arrived and whether the phasing is correct which will require manual re-pinning of the cycles. After all this, the program will still repaints if price moves out of phase. Sentient trader is helpful for the Hurst Cycles enthusiast but for the normal retail traders, you will got your work cut out for you. Check their youtube videos and you will know what i mean.

Thank you Kesk; You have kindly shared many tools, not just Timing Solution. Like Right Decision, Gambling by the Stars, Startrax etc. All of which people have found them useful as well in one way or another. And we thank you for them all

Saw it in TG. Psych FX Academy https://t.me/BFXSMCCOURSE/1470?single

Here is the link for Market Warrior 4.6.383RT. The last I checked couple of years ago, it can read ASCII and/or Metastock files. https://www.mediafire.com/file/ejs9k0dy1nlp7l8/MarketWarrior4.6.383RT.rar/file

Now that you mentioned, I would also think that maybe it was done with Market Warrior. Since the chart copyright is dated 1996, it could be MW3 or MW4 I still have a working copy of MarketWarrior 4.6 (Trial turned Registered). If you want to try out, let me know and I will check out my backup HDD.

Thank you Kesk for helping always; Have a Happy New Year

Happy Holidays and Cheerful Year ahead. 😃

Hi is a new link; https://www.mediafire.com/file/fpg8d2fg5ci8id1/Sirius-Bindu.rar/file

Checked the files and it appears that these files are from the Telegram channel - Volume Tools. If this is so, then this apparently is not free. You need to buy 'license' of 1 to 6 months. Same goes with Sierra. Only Motivewave, Jigsaw, Quantower and Bookmap is free.

I heard from someone that this could be the serial is moving around in memory each time the program is run. This is to prevent from fishing out the serial. I am not sure if this is the case. Perhaps, for those who want to use the program may consider using the patch as provided by Kesk in his timing solution & Nifty 2 update thread.

Thanks for the upload. Unfortunately this version don't work anymore with the latest MT4. MT4 has released new versions that defeats the crack dll. And you can't run old versions of MT4 as it will be rejected by the broker's server.