Delta scalper

[FCScalper]

Make sure you enable tick replay and have at least 3 days of data on your chart. Good use on the 2000 volume chart and 4 minute chart. scalping the next candle, or wait for the signal candle to be violated high or low of the signal and then reverse too. Also great for support and resistence, will leave here a 5 min chart with boxes show that.

DeltaScalperNT8.zip

[FCScalper]

[Traderbeauty]

thanks a lot for sharing- is there a website for this ?

[FCScalper]

21 minutes ago, Traderbeauty said:

thanks a lot for sharing- is there a website for this ?

Not too sure but it seems like it could be from Valtos.. but cannot confirm. Got the file only. I am testing since last night and seems like a good scalp for one bar or a u shape.. wait the signal to be violated and then take the signal.. and with the picture above seems doing well as good support and resistance areas... combining this with KISS OF, volume delta and Volume profile.

[FCScalper]

created also for TDview

[⭐ ajeet]

3 hours ago, FCScalper said:

Make sure you enable tick replay and have at least 3 days of data on your chart. Good use on the 2000 volume chart and 4 minute chart. scalping the next candle, or wait for the signal candle to be violated high or low of the signal and then reverse too. Also great for support and resistence, will leave here a 5 min chart with boxes show that.

DeltaScalperNT8.zip 196.71 kB · 27 downloads

Thanks for sharing
Is this ver 1 or Ver 2 ?

 

[imfm]

Could you share the TradingView version? Thank you.

[m.dannytrader]

Thanks for sharing. Curioius if you had any good results on this? 

Edited Saturday at 07:03 AM by m.dannytrader

[⭐ aotegaoteg]

deltascalper.com

[Arch Reactor]

@FCScalper how can you convert this to TV script, it requires TickReplay and TV doesnt have access to tick data , so this could be misleading in tick. If you are willing to share the source code for DeltaScalper?

[Arch Reactor]

Also to add this is old version of delta scalper , there is a newer improved version.

[NT8S]

The pic says plot 5m signal on 1min chart but couldn't do that. Anyone tried that.

[wertamido]

a lot bad signal for 5 min ,

u still make money if u are a super fast scalper for no more than 5-20 ticker, make sure about the broker spread... u can add some more setup for better add value 

[NT8S]

Yes agree, right now I'm looking at ES and MG using them in 1 m when the signal prints look for break of that candle on either side not necessarily on the same side the signal prints that way a many bad signals are eliminated.

[FCScalper]

I will say this again. I create my own version of this DeltaScalper. this is to mirror the indicator, it is not the same. Leaving the TV code for some that already asked for: 

 

//@version=6

indicator("Clean Color Custom Imbalance", overlay=true)

 

// Inputs

int volumePeriod = input.int(20, "Volume Lookback")

float volumeMultiplier = input.float(1.5, "Volume Multiplier")

 

// COLOR OPTIONS

color bullLineColor = input.color(color.green, "Bullish Line Color")

color bearLineColor = input.color(color.red, "Bearish Line Color")

color bullLabelColor = input.color(color.green, "Bullish Label Color")

color bearLabelColor = input.color(color.red, "Bearish Label Color")

color textColor = input.color(color.white, "Text Color")

 

// STYLE OPTIONS

int lineWidth = input.int(2, "Line Width", minval=1, maxval=5)

int lineLength = input.int(40, "Line Length")

 

// Detection

float avgVolume = ta.sma(volume, volumePeriod)

bool highVolume = volume > avgVolume * volumeMultiplier

float bodyRatio = math.abs(close - open) / (high - low)

 

bool strongBullish = highVolume and close > open and bodyRatio > 0.6

bool strongBearish = highVolume and close < open and bodyRatio > 0.6

 

// Draw imbalances

if strongBullish

    line.new(bar_index, low, bar_index + lineLength, low,

             color=bullLineColor, width=lineWidth)

    label.new(bar_index, low, "BULL", color=bullLabelColor,

             textcolor=textColor, style=label.style_label_up)

 

if strongBearish

    line.new(bar_index, high, bar_index + lineLength, high,

             color=bearLineColor, width=lineWidth)

    label.new(bar_index, high, "BEAR", color=bearLabelColor,

             textcolor=textColor, style=label.style_label_down)

[FCScalper]

currently developing a strategy for the indicator on TDV. Needs more progress and backtesting. 

[AllIn]

3 hours ago, FCScalper said:

currently developing a strategy for the indicator on TDV. Needs more progress and backtesting. 

looks like pretty good start!  If you'd share the strategy code, I'll play with it too.