orfila Posted March 17, 2021 Report Share Posted March 17, 2021 Converted indicators to NT8 from MT4, MT5, NT7, Tradingview , amibroker and others ... I abandoned NT7 in the last year and moved my trading system to NT8. To practice and learn the quirks of NT8 I started bringing in some of the indicators from other platforms that I found intriguing and some old time useful NT7 indis. NO dll's only .cs files I have tried to record in the description were it came from or who coded it. ( not always ) In some of the indis I have added a BS or BuySell graph ( +1 or -1 ) for use in strategies along with a BuySell switch ( boolean ) You are welcome to add your converted indis to the thread. Use at your own risk :D ⭐ ESVepara 1 Quote Link to comment Share on other sites More sharing options...
orfila Posted March 17, 2021 Author Report Share Posted March 17, 2021 (edited) 12 Edited November 25, 2022 by orfila misalto, ivan2007007, adonis and 8 others 11 Quote Link to comment Share on other sites More sharing options...
misalto Posted March 17, 2021 Report Share Posted March 17, 2021 It didnt work for me shows compiling errors Quote Link to comment Share on other sites More sharing options...
orfila Posted March 17, 2021 Author Report Share Posted March 17, 2021 Please check again, I had tried to move the JMA from a subdirectory called JOP but messed it up ;-) Quote Link to comment Share on other sites More sharing options...
mike83 Posted March 18, 2021 Report Share Posted March 18, 2021 can you post screens JMA wont work without a DLL Quote Link to comment Share on other sites More sharing options...
orfila Posted March 18, 2021 Author Report Share Posted March 18, 2021 (edited) here no dll needed, did you compile the sources ? Edited March 18, 2021 by orfila ⭐ alazif, Traderbeauty, adonis and 2 others 5 Quote Link to comment Share on other sites More sharing options...
⭐ trim Posted March 18, 2021 Report Share Posted March 18, 2021 Can you do these 2 indis? https://easyupload.io/8yi10h Quote Link to comment Share on other sites More sharing options...
orfila Posted March 18, 2021 Author Report Share Posted March 18, 2021 trim, Indis with lots of graphics are very time consuming to convert, so I avoid them and honestly I mainly convert things that help my own trading. I have done some of the navi ones and will try to upload them, but only a couple and not a 1to1 conversion. ⭐ laser1000it, ⭐ trim and ⭐ alazif 3 Quote Link to comment Share on other sites More sharing options...
⭐ trim Posted March 18, 2021 Report Share Posted March 18, 2021 (edited) trim, Indis with lots of graphics are very time consuming to convert, so I avoid them and honestly I mainly convert things that help my own trading. I have done some of the navi ones and will try to upload them, but only a couple and not a 1to1 conversion. I only need Navitrend, so if you have that one to share, I would greatly appreciate it. Here are Navi files individually https://easyupload.io/ged7gg Edited March 18, 2021 by trim Quote Link to comment Share on other sites More sharing options...
mvssunny Posted March 20, 2021 Report Share Posted March 20, 2021 (edited) Sorry off topic Free Ninza indicators as requested on Discord by some one https://www.mediafire.com/file/6xb0zzumdklzyxz/Ninza+Downloads.rar/file Edited March 20, 2021 by mvssunny Eric Nathan, ⭐ moneyshare, adonis and 8 others 11 Quote Link to comment Share on other sites More sharing options...
misalto Posted March 20, 2021 Report Share Posted March 20, 2021 (edited) still have errors jop could not be found RESOLVED REMOVED JOP AND COMPILED OK Edited March 20, 2021 by misalto Quote Link to comment Share on other sites More sharing options...
⭐ trim Posted June 9, 2021 Report Share Posted June 9, 2021 (edited) Hi, I´m looking for BMTEnvelopeExpansion indicator that it´s compatible with latest Nt8 versions, v.22 and above. Here is the older version that it´s not compatible. https://easyupload.io/jr0605 Thanks in advance. Edited June 10, 2021 by trim Quote Link to comment Share on other sites More sharing options...
⭐ trim Posted September 12, 2021 Report Share Posted September 12, 2021 I need help converting any of these 4 Nt7 indis to NT8. Thanks in advance. https://easyupload.io/6fydff Quote Link to comment Share on other sites More sharing options...
orfila Posted September 12, 2021 Author Report Share Posted September 12, 2021 (edited) trim, navi trendHiLo is just a jurik RSX with a setting of 2 navitrend is pivots hh hl ll lh should be able to replace w ==> priceactionswing w/ strength set to 3 Edited September 13, 2021 by orfila ⭐ alazif 1 Quote Link to comment Share on other sites More sharing options...
⭐ alazif Posted September 13, 2021 Report Share Posted September 13, 2021 trim, navi trendHiLo is just a jurik RSX with a setting of 2 navitrend is pivots hh hl ll lh should be able to replace w another one ... Hello. Could you share jurik RSX? Thanks. Quote Link to comment Share on other sites More sharing options...
orfila Posted September 13, 2021 Author Report Share Posted September 13, 2021 (edited) 123456 Edited November 25, 2022 by orfila ⭐ alazif, Traderbeauty and ivan2007007 3 Quote Link to comment Share on other sites More sharing options...
⭐ trim Posted September 14, 2021 Report Share Posted September 14, 2021 (edited) https://www.mediafire.com/file/s2c2n...a/rsx.zip/file ( before any complaints, the indi priceactionswing.cs goes in a folder :: Custom/Indicators/PriceActionSwing which you have to create ...) Thanks for trying to help, Orfila. Yes, I have been using NinjaPriceAction indicator as the replacement for NaviTrend, not completely sure if it´s the precisely the same calculations. Can you confirm that it is exactly the same calculations? What it would be most helpful is a RSI that draws big dots on the candles when hitting 70 or 30 (overbought oversold). I believe the Nt7 RSI indicator in those files I posted recently had that feature. The last indicator that I found helpful when using Nt7 and that I cannot find in Nt8 is BigMo, also included in the files. Any feedback or information is greatly appreciated. Edited September 14, 2021 by trim Quote Link to comment Share on other sites More sharing options...
jjc Posted September 14, 2021 Report Share Posted September 14, 2021 Used JMA for MA ( included ) HalfTrend -- from tradingview cool supertrend like indicator JMA -- Original version from NT7 https://www45.zippyshare.com/v/R5bgJvDm/file.html Hi could you re-post these again if you have time - thanks ! Quote Link to comment Share on other sites More sharing options...
ivan2007007 Posted September 15, 2021 Report Share Posted September 15, 2021 (edited) Hello. It would be very nice to rewrite this indicator from MT4 to HT8. Everyone knows it, but not everyone uses it for its intended purpose. I will describe how I use it. I don’t look at the direction of the channel, it’s silly because it is redrawn. You need to look exclusively at the width. Look at the chart for 1 min. By this, he gives information about what volatility is at the moment, how many points. An example of the euro: in the morning (according to my settings, which have not changed for 4 years), the channel width is 5-6 points, at such a time you need to be a suicide of your account to enter the market. BUT. it so happens that in the morning the width will be 12-15. and it may be so that the whole day the width will be no more than 8 points. this means that you cannot trade on that day. it happens that the width of 30-40 is a very strong market. Based on the width of the channel (in other words, volatility), we understand what we should have a stop, where we should look for an entry point and much more. strange that this indicator is not available for ninzi in any version. it would be very nice to have it. Yes, you say there are other indicators of ATR volatility, etc. but everything has been tried and this one that I post is the best. I hope you can rewrite it. thanks!!! https://drive.google.com/drive/folde...yE?usp=sharing Edited September 15, 2021 by ivan2007007 Quote Link to comment Share on other sites More sharing options...
omii Posted October 15, 2021 Report Share Posted October 15, 2021 Hi Guys can anyone reupload all the NaviTrend indicators for ninjatrader 7 or 8 especially the one with Navi indicator the one that creates the triangles @trim @orfila Quote Link to comment Share on other sites More sharing options...
⭐ Carlos5 Posted October 15, 2021 Report Share Posted October 15, 2021 Any can help to move this 2 files from NT7 to Nt8 ? - thank youPnFHorizontalTarget.zip Traderbeauty 1 Quote Link to comment Share on other sites More sharing options...
⭐ trim Posted October 16, 2021 Report Share Posted October 16, 2021 Hi Guys can anyone reupload all the NaviTrend indicators for ninjatrader 7 or 8 especially the one with Navi indicator the one that creates the triangles @trim @orfila Here Navi Nt7. If you are able to convert it to Nt8, it would be greatly appreciated. https://easyupload.io/gcqmw3 Quote Link to comment Share on other sites More sharing options...
ItsNoone Posted October 17, 2021 Report Share Posted October 17, 2021 I need help converting this one from trading view to NT8 //@version=4 // // Copyright © 2017 CC BY, whentotrade / Lars von Thienen // Source: // Book: Decoding The Hidden Market Rhythm - Part 1: Dynamic Cycles (2017) // Chapter 4: "Fine-tuning technical indicators for more details on the cRSI Indicator // // Usage: // You need to derive the dominant cycle as input parameter for the cycle length as described in chapter 4. // // License: // This work is licensed under a Creative Commons Attribution 4.0 International License. // You are free to share the material in any medium or format and remix, transform, and build upon the material for any purpose, // even commercially. You must give appropriate credit to the authors book and website, provide a link to the license, and indicate // if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. // study(title="RSI cyclic smoothed", shorttitle="cRSI") src = close domcycle = input(20, minval=10, title="Dominant Cycle Length") crsi = 0.0 cyclelen = domcycle / 2 vibration = 10 leveling = 10.0 cyclicmemory = domcycle * 2 //set min/max ranges? h1 = hline(30, color=color.silver, linestyle=hline.style_dashed) h2 = hline(70, color=color.silver, linestyle=hline.style_dashed) torque = 2.0 / (vibration + 1) phasingLag = (vibration - 1) / 2.0 up = rma(max(change(src), 0), cyclelen) down = rma(-min(change(src), 0), cyclelen) rsi = down == 0 ? 100 : up == 0 ? 0 : 100 - 100 / (1 + up / down) crsi := torque * (2 * rsi - rsi[phasingLag]) + (1 - torque) * nz(crsi[1]) lmax = -999999.0 lmin = 999999.0 for i = 0 to cyclicmemory - 1 by 1 if nz(crsi, -999999.0) > lmax lmax := nz(crsi) lmax else if nz(crsi, 999999.0) < lmin lmin := nz(crsi) lmin mstep = (lmax - lmin) / 100 aperc = leveling / 100 db = 0.0 for steps = 0 to 100 by 1 testvalue = lmin + mstep * steps above = 0 below = 0 for m = 0 to cyclicmemory - 1 by 1 below := below + iff(crsi[m] < testvalue, 1, 0) below ratio = below / cyclicmemory if ratio >= aperc db := testvalue break else continue ub = 0.0 for steps = 0 to 100 by 1 testvalue = lmax - mstep * steps above = 0 for m = 0 to cyclicmemory - 1 by 1 above := above + iff(crsi[m] >= testvalue, 1, 0) above ratio = above / cyclicmemory if ratio >= aperc ub := testvalue break else continue lowband = plot(db, "LowBand", color.aqua) highband = plot(ub, "HighBand", color.aqua) fill(h1, h2, color=color.silver, transp=90) fill(lowband, highband, color=color.gray, transp=90) plot(crsi, "CRSI", color.fuchsia) //@version=4 // // Copyright © 2017 CC BY, whentotrade / Lars von Thienen // Source: // Book: Decoding The Hidden Market Rhythm - Part 1: Dynamic Cycles (2017) // Chapter 4: "Fine-tuning technical indicators for more details on the cRSI Indicator // // Usage: // You need to derive the dominant cycle as input parameter for the cycle length as described in chapter 4. // // License: // This work is licensed under a Creative Commons Attribution 4.0 International License. // You are free to share the material in any medium or format and remix, transform, and build upon the material for any purpose, // even commercially. You must give appropriate credit to the authors book and website, provide a link to the license, and indicate // if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. // study(title="RSI cyclic smoothed", shorttitle="cRSI") src = close domcycle = input(20, minval=10, title="Dominant Cycle Length") crsi = 0.0 cyclelen = domcycle / 2 vibration = 10 leveling = 10.0 cyclicmemory = domcycle * 2 //set min/max ranges? h1 = hline(30, color=color.silver, linestyle=hline.style_dashed) h2 = hline(70, color=color.silver, linestyle=hline.style_dashed) torque = 2.0 / (vibration + 1) phasingLag = (vibration - 1) / 2.0 up = rma(max(change(src), 0), cyclelen) down = rma(-min(change(src), 0), cyclelen) rsi = down == 0 ? 100 : up == 0 ? 0 : 100 - 100 / (1 + up / down) crsi := torque * (2 * rsi - rsi[phasingLag]) + (1 - torque) * nz(crsi[1]) lmax = -999999.0 lmin = 999999.0 for i = 0 to cyclicmemory - 1 by 1 if nz(crsi, -999999.0) > lmax lmax := nz(crsi) lmax else if nz(crsi, 999999.0) < lmin lmin := nz(crsi) lmin mstep = (lmax - lmin) / 100 aperc = leveling / 100 db = 0.0 for steps = 0 to 100 by 1 testvalue = lmin + mstep * steps above = 0 below = 0 for m = 0 to cyclicmemory - 1 by 1 below := below + iff(crsi[m] < testvalue, 1, 0) below ratio = below / cyclicmemory if ratio >= aperc db := testvalue break else continue ub = 0.0 for steps = 0 to 100 by 1 testvalue = lmax - mstep * steps above = 0 for m = 0 to cyclicmemory - 1 by 1 above := above + iff(crsi[m] >= testvalue, 1, 0) above ratio = above / cyclicmemory if ratio >= aperc ub := testvalue break else continue lowband = plot(db, "LowBand", color.aqua) highband = plot(ub, "HighBand", color.aqua) fill(h1, h2, color=color.silver, transp=90) fill(lowband, highband, color=color.gray, transp=90) plot(crsi, "CRSI", color.fuchsia) Quote Link to comment Share on other sites More sharing options...
omii Posted October 18, 2021 Report Share Posted October 18, 2021 Here Navi Nt7. If you are able to convert it to Nt8, it would be greatly appreciated. https://easyupload.io/gcqmw3 Hi @trim I am getting error when I am downloading from the given link can you upload on media fire/mega/sendspace if possible Quote Link to comment Share on other sites More sharing options...
⭐ trim Posted October 19, 2021 Report Share Posted October 19, 2021 Hi @trim I am getting error when I am downloading from the given link can you upload on media fire/mega/sendspace if possible Use a VPN omii 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.