GZTGOLD + DWAN {Interesing Signal}

[LIIonsar]

Im begining this post to follOwing the idea some days a go a guy post in other thread forum showing an INTERESTING SIGNAL

SD VOLUMEN WITH GZT AND DWAN TOOLS:

here single template to use with NQ/ 10-2 Renko spectrum

Notice: when volatility is lower you must change Timeframe to 8-1 or 6-1

https://www.sendspace.com/file/sf6wbv

 

Im requesting original creator a method TO explain us how setup TARGETS

 

 

 

 

RULES:

 

-You must wait price touch or entering volumen zone then

-See your tirggers in this example i use original gzt method using entrypatern conlfuence and confirm the short trend with dwan to entering the trade

-Stop is clearly above poc in the profile or the last price when voluemn bar was added

-Misiing idea how setup a Target yet if you have idea share us:

--Aslo im adding Evoprc2 to confirm day trend observing the angle into pcr2

 

Notice: im testing some radom days and always get 100% acurated trades but is a little model to determinate if signal is solid and with good ration some fuys tellme get over 90% always

if that its true i can code a Automatic strat for that signal for all here.but help with Targets

Edited September 15, 2016 by LIIonsar

[shrike]

Hi

 

stop 1 tick avobe swing H/L ?

 

enter with 2 contracts , you have to calc average lenght of trend after each time a signal appears ,given that you could manage your position better, it doesn't mean you can have a rows of loss due change in volatility.

 

P.S.

 

what's Evoprc2?

[jff1713006937]

LIIonsar

Can't we set the first target to the next closest reference levels? Such as vah or val or poc?

Once the first target is achieved , one can move the SL of the trade to cost.

 

Just my idea, please do let me know your thoughts on this.

 

THanks,

Jff

[uazpeitia]

I'm seeing that among thos 100% successes, the only one fail only because I put the first contract take profit at 8 ticks. some of them went on the right direction and returned. but the all of them went right for 6.

 

you could automate the first 8/8 R/R plus a second runner contract, that trails the current price 8 ticks after. from this you could tune up the automatic

 

jjf's idea is just plain betterxd

Edited September 15, 2016 by uazpeitia

[LIIonsar]

Im adding Symetricdots Indicator for Jays look the imagen to use as Targets using the symetricdost logic:

 

[LIIonsar]

ECO_PRC2 is a lienar regresion smothed and trailed excellent to know trending changing in the day

[LIIonsar]

Uazpetia i se youare scalping the method tellme your Profit ratio methodology?

how many ticks you get for your first stop? for the 6 tivks target?>

[LIIonsar]

I'm seeing that among thos 100% successes, the only one fail only because I put the first contract take profit at 8 ticks. some of them went on the right direction and returned. but the all of them went right for 6.

 

you could automate the first 8/8 R/R plus a second runner contract, that trails the current price 8 ticks after. from this you could tune up the automatic

 

I recommend ! if you trade renkos use 1 tikc less acording your current Timeframe

for example if youare trading 6-2 put a 5 ticks target at least

with the current volatily that dayws i increase timeframes to 10-2 and try get 8 ticks profit

[OsmanIM]

LIIonsar,

Nice mix and match with effective indicators coming up with your own system.That's the aim of this forum. Hope to see you code an automatic strat for us.:)

Edited September 15, 2016 by OsmanIM

[LIIonsar]

Yes. but NEED IDEAS TO MANAGE the trade

[profile]

Liionsar - or any other member,

 

Could you please upload the indicators GZT and DWAN and others you use ?

With the template from post 1 we can all be on the same level.

Edited September 15, 2016 by profile

[shrike]

ECO_PRC2 is a lienar regresion smothed and trailed excellent to know trending changing in the day

 

ok thanks , could be shared ?

 

btw , average of lenght of zig zag ,based on current volatility can give you an ideal target

[LIIonsar]

Somebody have some indicator calculate current average usin volatily calculations?

[⭐ adnen_messaoudi]

Im begining this post to follOwing the idea some days a go a guy post in other thread forum showing an INTERESTING SIGNAL

SD VOLUMEN WITH GZT AND DWAN TOOLS:

here single template to use with NQ/ 10-2 Renko spectrum

Notice: when volatility is lower you must change Timeframe to 8-1 or 6-1

https://www.sendspace.com/file/sf6wbv

 

Im requesting original creator a method TO explain us how setup TARGETS

 

 

 

 

RULES:

 

-You must wait price touch or entering volumen zone then

-See your tirggers in this example i use original gzt method using entrypatern conlfuence and confirm the short trend with dwan to entering the trade

-Stop is clearly above poc in the profile or the last price when voluemn bar was added

-Misiing idea how setup a Target yet if you have idea share us:

--Aslo im adding Evoprc2 to confirm day trend observing the angle into pcr2

 

Notice: im testing some radom days and always get 100% acurated trades but is a little model to determinate if signal is solid and with good ration some fuys tellme get over 90% always

if that its true i can code a Automatic strat for that signal for all here.but help with Targets

 

Hi LIIonsar,

First thank you to develop the methode.

Well, if you want an ideal point of exit that you can automate i can help.

I will take your same graph.

For me ,the exit point is this :

1- The GZT_EntryPattern is red

2- The Leading ( blue ) in DVANShortTermTrend cross the point when the histrogram turn from red to green

====> This's on case if we're seller and we looking for point of exit

If we are buyer the point of exit will be :

1- The GZT_EntryPattern is green

2- The Leading ( blue ) in DVANShortTermTrend cross the point when the histrogram turn from green to red

 

The entry point will be like that ( if we're seller ):

1- The Volume Node red appear

2- The GZT_EntryPattern is green

3- The Leading ( blue ) in DVANShortTermTrend cross the point when the histrogram turn from green to red

 

I hope this idea help you. And i hope you automate that in SiBloodHound SharkIndicator and share the result

Many thank's bro

Best Regards

 

http://nsa37.casimages.com/img/2016/09/15/160915015409938773.jpg

[helase]

Hi LIIonsar,

Thanks a lot for your thread, could you please share all indicators in one file cause the template is missing most indicators.

[LIIonsar]

But i think willbe better use Ordeflow or microstructure screen to determine more quickly when exti orders? perhpas see GZT profile? more ideas we have a good method here

[LIIonsar]

BUT WE NEED FROM ORIGINAL POSTED GUY A CLARIFICATION how signal is validated becasue for example today in Crude oil we are havong several signals broken and the stop constantly has been executed also im finding some times the zones repaint when price moves quickly please Clarify us the entry!regards

[⭐ adnen_messaoudi]

i just follow your idea. now you want to change and you want orderflow !!!

for me, i keep an eye on DS,DL signal this's realy how i enter and how i exist.

i already clarify how i enter in safe side in original post

[lululee]

BUT WE NEED FROM ORIGINAL POSTED GUY A CLARIFICATION how signal is validated becasue for example today in Crude oil we are havong several signals broken and the stop constantly has been executed also im finding some times the zones repaint when price moves quickly please Clarify us the entry!regards

 

I am finding the same thing Zones are being repainted and any indicator which repaints is not good at all in my book.

[LIIonsar]

yes im gettin repains also

[LIIonsar]

I think we are having mistake interpreting the original signal propoused here in to the forum

here is the correct signal validation: IMAGE

 

Edited September 16, 2016 by LIIonsar

[uazpeitia]

Yes, I look for something like this.

 

http://www.image-share.com/upload/3321/268m.jpg

http://www.image-share.com/upload/3321/269m.jpg

 

I pick the trade when: cross into or very near volume zone PLUS the arrow. When those two meet, I trade.

[uazpeitia]

Could I suggest to incorporate a sound when the lines cross each other? I could be a good way to atract the atention to the right market, among all traded.

[LIIonsar]

http://www.image-share.com/upload/3321/268m.jpghttp://www.image-share.com/upload/3321/269m.jpg

[LIIonsar]

could you setup your indicator to use with ES/ i think es have less volatily ranges