wcicom Posted October 21, 2012 Report Posted October 21, 2012 Build 20 does not have a virus in it, it is just that anti-virus programs don't like files of this type. If you install build 20, it will run ok even with anti-virus software running in the background, but once it does the scan - it will delete the fix file. You have to open your anti-virus software and give exception to this particular file - so next time during the scan it will not remove it. Quote
sexdsexd Posted October 21, 2012 Report Posted October 21, 2012 forget the mt predictor...it repaints badly ... are you sure? Quote
wcicom Posted October 21, 2012 Report Posted October 21, 2012 Not sure if it repaints, but if you use it in real time - you are only concerned with the last swing signal. Quote
sexdsexd Posted October 21, 2012 Report Posted October 21, 2012 Not sure if it repaints, but if you use it in real time - you are only concerned with the last swing signal. It repaints history signal,not realtime signal,right? Quote
rg83 Posted October 21, 2012 Report Posted October 21, 2012 I have turned off my anti visus, dowloaded the patch again and I cant run the patch exe. It says winzip was unable to extract MTP_Patch.exe, terminating operation. Ive tried everything, turned of firewall etc, its driving me crazy . how the hell do I run the .exe file. It worked before and for some reason its now dead... Quote
sexdsexd Posted October 21, 2012 Report Posted October 21, 2012 I have turned off my anti visus, dowloaded the patch again and I cant run the patch exe. It says winzip was unable to extract MTP_Patch.exe, terminating operation. Ive tried everything, turned of firewall etc, its driving me crazy . how the hell do I run the .exe file. It worked before and for some reason its now dead... turn off anti visus . Quote
aquarius5 Posted October 22, 2012 Report Posted October 22, 2012 Just tried -- does not work Here is the error : Failed to call method 'Initialize' for indicator 'MTP Analysis': Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "MTPredictor.Activation.Properties.Resources.resources" was correctly embedded or linked into assembly "MTPredictor.Activation" at compile time, or that all the satellite assemblies required are loadable and fully signed. Yes, me too, I had that problem. But with the latest MTPredictor.Activation.dll I uploaded here http://www.mediafire.com/?4j3amocv5x33xzd I stop having that issue ... Quote
rg83 Posted October 22, 2012 Report Posted October 22, 2012 is that with build 20 setup or another, please can you post the setup file you downloaded for this .dll , cheers... Quote
aquarius5 Posted October 22, 2012 Report Posted October 22, 2012 Hi, I don't see the following words on the top: Clear; Analysis; Risk/Reward; DecisionPoint; EWInt; UpWave, DWave; Trade if you used the setup posted by edi025: http://www.4shared.com/file/WBhI4PZb/MTPNT7AddonsSetup356.html?refurl=d1url and the dropped the latest version of the patched dll from here: http://www.mediafire.com/?4j3amocv5x33xzd directly into folder: NinjaTrader 7/bin/custom you should be all set ... also, when opening NT7, go to the log tab and make sure all 4 MTpredictor dlls are loaded you are good to go ... Also, once you create a new chart, load any Mtpredictor template, like MTPredictor Candle Stick Day Session, this will load the required indicators on the chart and you will also be able to see the top menus: Clear; Analysis; Risk/Reward; DecisionPoint; EWInt; UpWave, DWave; Trade hope this helps ... Quote
aquarius5 Posted October 22, 2012 Report Posted October 22, 2012 I did have Build 20 working fine then the patch would not work and everything just failed. I tried to remove it all and reinstall but the patch.exe would not extract. Does anyone have any version working, if so please tel me what one works , Im happy with any for now.. See post http://indo-investasi.com/showthread.php/19419-MT-Predictor-Add-On-Ninja-7?p=248549&viewfull=1#post248549 Quote
aquarius5 Posted October 22, 2012 Report Posted October 22, 2012 OK I see you have the updated DDL, please can you direct me to the correct download links for the .exe file. Then I guess I just replace the .dd with the patched one posted above? Check post http://indo-investasi.com/showthread.php/19419-MT-Predictor-Add-On-Ninja-7?p=248549&viewfull=1#post248549 yes, you simply replace the dll with the patched one ... Quote
aquarius5 Posted October 22, 2012 Report Posted October 22, 2012 aquarius5 i think you are very close to nailing it. Just check some few activation jumpers. Appreciate you working on this to help us out.. Don't give up .... hey, glad I can be of help... although it has taken me several days to understand the code, I'm hoping to completely clean it ... unfortunately, I don't have an intraday data feed account to test... that would help me a lot ... Quote
sexdsexd Posted October 22, 2012 Report Posted October 22, 2012 hey, glad I can be of help... although it has taken me several days to understand the code, I'm hoping to completely clean it ... unfortunately, I don't have an intraday data feed account to test... that would help me a lot ... Zen-Fire Demo 30 days: http://www.mirusfutures.com/zen-fire_ninjatrader/online_futures_trading_demo_account aquarius5 1 Quote
sexdsexd Posted October 22, 2012 Report Posted October 22, 2012 hey, glad I can be of help... although it has taken me several days to understand the code, I'm hoping to completely clean it ... unfortunately, I don't have an intraday data feed account to test... that would help me a lot ... You can use web proxy for register zenfire demo account after 30 days, for example: http://hidemyass.com/ or something other :))) Simple tape in google "web proxy free" and use any... hidemyass.com tested :) aquarius5 1 Quote
thaomoua Posted October 22, 2012 Report Posted October 22, 2012 aquarius5, thanks for taking your time to help and assist ppl in getting this to work. U are awesome! Quote
rg83 Posted October 22, 2012 Report Posted October 22, 2012 Thanks aquarius5, ill try that now, hope i can get it back up... Quote
rg83 Posted October 22, 2012 Report Posted October 22, 2012 if you used the setup posted by edi025: http://www.4shared.com/file/WBhI4PZb/MTPNT7AddonsSetup356.html?refurl=d1url and the dropped the latest version of the patched dll from here: http://www.mediafire.com/?4j3amocv5x33xzd directly into folder: NinjaTrader 7/bin/custom you should be all set ... also, when opening NT7, go to the log tab and make sure all 4 MTpredictor dlls are loaded you are good to go ... Also, once you create a new chart, load any Mtpredictor template, like MTPredictor Candle Stick Day Session, this will load the required indicators on the chart and you will also be able to see the top menus: Clear; Analysis; Risk/Reward; DecisionPoint; EWInt; UpWave, DWave; Trade hope this helps ...[/The indicators load but i have none of the tabs on the top i.e analyse, ect...and no waves, signals. Its driving me crazy I have no idea why this wont work... Screen Grab http://www.4shared.com/photo/U8XINE6d/bastard_MTP.html Quote
rg83 Posted October 22, 2012 Report Posted October 22, 2012 http://www.4shared.com/photo/U8XINE6d/bastard_MTP.html  Screen grab Quote
CS_ta Posted October 22, 2012 Report Posted October 22, 2012 OK Guys, I got the MTP 3.5.6 version working. Download and run setup file provided by edi025: http://www.4shared.com/file/WBhI4PZb/MTPNT7AddonsSetup356.html?refurl=d1url Replace patched dll provided by aquarius5 in folder ...NinjaTrader 7/bin/custom http://www.mediafire.com/?4j3amocv5x33xzd As directed by aquarius in post #59 create the file "NINJA7.xml" in the path: C:\Users\[user]\AppData\Local\MTPredictor\License containing: <?xml version="1.0" encoding="utf-8"?> <activation unlockCode="1234567" firstName="name" lastName="last" email="[email protected]" /> rg83, 445NDO, tradernate and 4 others 7 Quote
aquarius5 Posted October 22, 2012 Report Posted October 22, 2012 http://www.4shared.com/photo/U8XINE6d/bastard_MTP.html  Screen grab If you had a previous version of MTpredictor, did you removed it before installing the newest setup? if you did, did you remove those files physically from NinjaTrader 7/bin/custom folder? have you taken a look into the trace folder (NinjaTrader 7\trace), in the latest trace file? In control center window, go to log tab, do you see any unsual warning? error message? That's all I can think of on where to look ... 445NDO and rg83 2 Quote
aquarius5 Posted October 22, 2012 Report Posted October 22, 2012 OK Guys, I got the MTP 3.5.6 version working. Download and run setup file provided by edi025: http://www.4shared.com/file/WBhI4PZb/MTPNT7AddonsSetup356.html?refurl=d1url Replace patched dll provided by aquarius5 in folder ...NinjaTrader 7/bin/custom http://www.mediafire.com/?4j3amocv5x33xzd As directed by aquarius in post #59 create the file "NINJA7.xml" in the path: C:\Users\[user]\AppData\Local\MTPredictor\License containing: <?xml version="1.0" encoding="utf-8"?> <activation unlockCode="1234567" firstName="name" lastName="last" email="[email protected]" /> Way to go!!! =D> :)>- 445NDO and wcicom 2 Quote
445NDO Posted October 22, 2012 Report Posted October 22, 2012 Wohoo !!!! Finally this works now !! Thanks to aquarius5 and CS_ta for the wonderful step by step instructions and i could get it working in just 3 mins. Love you guys !! Thanks so much for helping us all out with your God gifted knowledge... :) very happy atlast !! If anyone has any issues ping me or pm me and i can help you all to configure it but the instructions by Ca_ta are very well laid and simple. just follow it.:)  If you had a previous version of MTpredictor, did you removed it before installing the newest setup? if you did, did you remove those files physically from NinjaTrader 7/bin/custom folder? have you taken a look into the trace folder (NinjaTrader 7\trace), in the latest trace file? In control center window, go to log tab, do you see any unsual warning? error message? That's all I can think of on where to look ... Quote
445NDO Posted October 22, 2012 Report Posted October 22, 2012 Wohoo !!!! Finally this works now !! Thanks to aquarius5 and CS_ta for the wonderful step by step instructions and i could get it working in just 3 mins. Love you guys !! Thanks so much for helping us all out with your God gifted knowledge... :) very happy atlast !! If anyone has any issues ping me or pm me and i can help you all to configure it but the instructions by Ca_ta are very well laid and simple. just follow it.:)  OK Guys, I got the MTP 3.5.6 version working. Download and run setup file provided by edi025: http://www.4shared.com/file/WBhI4PZb/MTPNT7AddonsSetup356.html?refurl=d1url Replace patched dll provided by aquarius5 in folder ...NinjaTrader 7/bin/custom http://www.mediafire.com/?4j3amocv5x33xzd As directed by aquarius in post #59 create the file "NINJA7.xml" in the path: C:\Users\[user]\AppData\Local\MTPredictor\License containing: <?xml version="1.0" encoding="utf-8"?> <activation unlockCode="1234567" firstName="name" lastName="last" email="[email protected]" /> Quote
wcicom Posted October 22, 2012 Report Posted October 22, 2012 Same here, thanks aquarius5 and CS_ta, my User folder did not even have MTPredictor\License folders, but after I created them, and "XML" files - working well so far. Quote
rg83 Posted October 22, 2012 Report Posted October 22, 2012 Hi Guys, I am just daft, how do i create the xml file. I have no C:\Users\[user]\AppData\Local\MTPredictor\License on my system, I take it I just save the file here and create it? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.