vx13

http://www.forexfactory.com/attachment.php?attachmentid=686309&d=1303805877
 
Another trader had answered my humble request when I posted the question on FF about that same question last month.
He believes that these are the proper settings.
 
If you can't see it, it's:
Period: 80
Method: Simple
Apply: Close
DEviation: 1.80%

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Simple equation:
 
Lots = Profit/Pips (by 5 decimal places)
 
So...
Lots = 5/200
Your lot size is 0.025
 
But I feel that is too large for a $100 account...
Another equation:
Lots = (Capital*risk)/stoploss
 
Let's say you're risking 2% with an SL of 20pips (200 by a 5-digit broker)
Lots = (100*0.02)/200
Lots = 0.01
 
Now maybe you're using a greater risk threshold like 5% at 20pip SL or a tighter SL like 8pips at 2% risk so 0.025 lots may be viable depending on you.
But these two equations are basic cornerstones for Money Management.
 
As for ping, port forward your MetaTrader terminal.
Tutorial: http://www.portforward.com

David's the finest poster on this forum, bar none. Would hate to see him leave over politics and a war of words. Kardel, just do the right thing and we can all happily move forward. Thanks.

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

http://www.forexfactory.com/attachment.php?attachmentid=686309&d=1303805877
 
Another trader had answered my humble request when I posted the question on FF about that same question last month.
He believes that these are the proper settings.
 
If you can't see it, it's:
Period: 80
Method: Simple
Apply: Close
DEviation: 1.80%

http://www.forexfactory.com/attachment.php?attachmentid=686309&d=1303805877
 
Another trader had answered my humble request when I posted the question on FF about that same question last month.
He believes that these are the proper settings.
 
If you can't see it, it's:
Period: 80
Method: Simple
Apply: Close
DEviation: 1.80%

Forex EA Generator Professional v4.1
 
Forex Expert Advisor Generator is designed to help you create Forex Expert Advisors and Scripts for MetaTrader platform. You can test your ideas without programming. Generated Expert Advisor and Scripts can help with trading or trade in automated mode.
 
Diagram based interface offers incredible flexibility. It allows you to create complex trading setups. But do not be overwhelmed by all the possibilities. Always start small. First create simple diagram that just executes orders. Once you get it working – build on it.
 
http://i56.tinypic.com/dli4jm.gif
 
Download (7.6MB):
http://www.multiupload.com/YZLNV5UB3L
 
Password:
yababy
Read the Readme.txt in the archive for instructions.
Enjoy!:D
 
Don't forget to hit the Thanks button!

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Joseph you RULE. You are an absolute GENIUS.
Your awesomeness and generosity makes me want to learn how to code myself so I can bother people less and help others too.
It paints the original arrows but that's of no matter. It could come in handy!
But again thank you very much :)
 

 
You are definitely spot on with that, hermes. I'm very slowly coding an EA that will exit my positions when I'm not around. Not to open or modify but just to close. I don't particularly like hard stops and generic trailing stops, y'see :))
Once I can finish it, I will definitely be moving up tfs :)
 
But as far as my current style goes, it's not so much scalping even though it's a low tf. Every tf has swings and trends. I'm targetting those ;)
Not so much the itty bitty movements haha
This way, I don't have to worry so much about the spread

Non Repainting RSIEMA
 
vx13,
one simple way to tame real time signals of a repainting indicator without deciphering its exact algo is to create another (simple) indicator that calls on the first one on every tick and 'captures' the output at the time of the call so if the original indicator goes back a few bars and changes things, that has no effect on the new indicator***. This does not work for historical data.
Usually the resulting signals are pretty lame when repainting is "disabled" and I don't think this is any different.
I have coded such indicator. You can take it for a spin and let us know what you think. Again, remember that this is good for forward real time testing as the past will be the same for both. To avoid interference in case you want to run both indicators on the same chart for comparison, I am using squares (aqua/yellow) in place of arrows on the chart. Make sure the original indicator is in the same directory.
 
 
RumiRSIEMA-nrp.ex4
 
 
Enjoy!
 
josephR
 
***You can also change the original indicator so it calls itself w/ modified options to the same effect, but you have to understand what the indicator is doing and it is more complicated. This happens to be a simple one but the solution is generic.

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

Links to RSI EMA MTF v1.2 indicator at the bottom of post.
 
http://img109.imageshack.us/img109/2724/holygrailsignals.gif
 
You can see here that there are damn good signals from this indicator.
But it takes its cues from a timeframe several tfs above.
It isn't necessarily "repainting" because the signal is technically confirmed on the next higher tf candle. So in this example, the arrows are confirmed every hour.
 
On the lower tf (the 5 minute tf in this case), it repaints heavily. It can repaint up to 12 bars back which is absolutely crazy :))
 
The signals look fantastic until you realize how they work.
Maybe there's a way to stop the arrows from being removed?
 
I looked at the code and it doesn't seem simple because the code was designed to target the upper tf.
...or I'm just a terrible coder (which I am).
 
In the MT4 Strategy Tester, it does not repaint whatsoever. I don't know how but it works amazingly.
Using it with the LFH Tester on MT4, I had no losing trades.
 
This technically doesn't repaint but this indicator has amazing potential.
Is it possible to stop the indicator from repainting on the lower tf? [-O<
 
http://www.mediafire.com/?zhm8xc6ljjnrr3c (Thanks to Diesel 10)
 
http://zalil.ru/30728586 (thanks to lgsony)

5 Years I have been at it. I have seen almost every system, method out there and prob some that won't even be found in the forums. Have literally read over 100 plus books on trading, systems, methods, money management .... the mental game etc etc. Point being I have paid my dues and then some like all others who end up as a profitable real trader.
 
In that 5 years yes I have learned how to read price action, how the market works, flows and ebbs and how real traders trade, what they look for, what they are looking at. I have learned how to actually trade. In that time I have learned some good methods to trade but I have also came up with my own. Let's be honest as a new trader just trading off of price action will not work. The knowledge base is not there. However following a set of rules that will govern your trading will work. JUST FOLLOW THE RULES!!!
 
Here is a method that WORKS and it is EASY to see the signals and NO re painting. If you follow the rules it works and will prob be one of the easiest most profitable methods you will find .... that I can guarantee!!!
 
Now if I can just figure out how to post images.
 
~AlphaTrader.ca
 
ALL THE INDICATORS R RIGHT HERE WITH TEMPLATE: NEW VERSION 3.0 as of May 4/ 2011
 
THE FILE BELOW HAS ALL the files needed to make this perform - may 12/ 2011
 
https://rapidshare.com/files/4084425923/version_3.0_alphatrader.zip

Thank you! Exactly what I was looking for!

Hi
I was wondering if anyone could create an ATR Trailing Stop Band indicator.
It looks like:
 
http://www.incrediblecharts.com/images/png_images/crb_atr_bands.png
 
Below I have attached an indicator that creates either one side or the other of the trailing stop band.
I'm having trouble having them plot both sides to create a channel like the above image.
Any help would be much appreciated! :D
 

http://[email protected]/BR4PMQZGW4