rcarlos1947

Understood, I just like to try on NT8 edu just in case it works withut issues.

The V3.0.2.5 product is far more advanced in features than v.3.1.4, one of which allows you to set targets on any line or indicator on the chart.

******CAUTION****** Loading this dll into NT8 will work temporarily, but at some point it will keep NT8 from starting. If you have installed it remove it normally or with NT8 closed, use explorer to delete it from bin/custom. NT8 will start normally after that.

Hopefully this older document can get you started. Good Luck. AutoTraderManualN8V5.pdf

Folks, Not enough feedback on JonSnow as a vendor, so here's my impression. I have purchased several products from him over the last couple of years. The products work as expected, and when they don't, communication with him to resolve issues via Telegram is good, until it is decided if it was my issue or his. I use his products on more than one pc for a single unit price, and an satisfied with the products and service. I like that his catalogue of products lists prices and versions provided. If no version is listed, He will respond to your query with the version He has available. He does provide updates at no charge, although He may not always make you aware that there are updates available. Anyway, thats my two cents worth.

The current version is V3.0.2.2 with an update coming soon. @apmoo@kimsam@the_evil This is just a question. In your opinion, will you be able to educate this product? If the answer is yes, then I'm sure you've considered whether the fix is portable to future updates with the same licensing scheme. If the answer is no, then this should eliminate the various requests trying to pressure you. In either case, I'm sure many of us truly appreciate all the work you've done to expand our toolbox. Thank you !!!

Sorry if I wasn't clear, I am hoping someone in this community has the aiTrendPredictor because it was not included in @apmoos bundle.

For those that haven't looked into his products, this is his youtube site: https://www.youtube.com/@RaffiSosikian/videos And this is a video of how He uses aiTrendPredictor with one of the apps provided by @apmoo, in which He expains how it can help with those that trade funded accounts, Which I don't do. And here is one for normal day trading shared by val in which Raffi adds Delta as a trigger, could provide some interesting testing. PriceActionPivoterV3.zip This is the youtube video for that one So if you check out the youtube and have some of Raffi's tools that have not been shared with @apmoo, you might consider expanding this collection.

@apmooThank you for these algos. Has anybody found additional apps by Rafi, like aiTrendPreditor ?

This is the only file I could find, brought to you by@apmoo https://workupload.com/file/agMEYvEuDgh

As is always the case, what works for one person does not always work for everyone. That's why I don't ask for templates. When I test I first run the default, then I try different bar types (time, Renko, Volume, etc), then try different bar settings. If I find something interesting, then I take that one to Strategy Analyzer. Luckily, these bots do not have 30+ parameters to test. You might find something that works for you. Happy hunting !!!!

Since this app has been fixed by @apmoo, I don't think you need NT8 edu to run it. It should run on the default NT8 demo. I could be wrong.

Import it normally via the Tools/Import Ninjascript method

@misalto I have not been able to get it working. Error says it cannot find Newtonsoft.Json.dll ver 10.0.0. Spending the weekend updating pc's to NT8 8.1.5.2 and clearing any issues.

Works on edu NT8. Thank you !

@alodante You sent this to @apmoo for fixing. The PDF included mentions a file "Newtonsoft.Json" that needed to be loaded into NT8. It was not included in the folder you contributed. Do you have it available by chance ? https://workupload.com/file/YpHQZUNxDpc

Brought to you by @apmoo https://workupload.com/file/2sQvkDRMH63

I'm glad We both found a solution. Good Luck ! 👍

@Gretta This is only a problem on edu NT8, which I assume is what you have. I have come to the conclusion that it doesn't matter if Settings TimeZone is grayed out, as long as it displays your correct timezone, because there is no need to change that field once timezone is correct. The important part is that the charts display the correct time regardless of whether you close and open a workspace, or even create a new workspace with a new chart. If chart time is correct, then Settings TimeZone or the Config.xml become unimportant as long as it doesn't revert back to UTC.

Ok folks, here it is. The edu NT8 that was causing issues has gone from ID3 authorization to another form of HW identification which is displayed in a registration panel which has to be sent to him/her from which a KEY is generated to authorize the NT8Loader. Which means that to upgrade to 8.1.5.2, you must register each PC that was previously registered via ID3. Now after following the new procedure, the Settings remained locked to "UTC" and the chart times displayed also "UTC". So I closed NT8 and edited the Config.xml file as I described before and Settings went to "(UTC -6:00) Central Time ...." and the charts displayed the correct time. I've only used this on one PC, but with holiday weekend coming, I'll have more time. Sorry for the long explanations, I hope this helps someone, and again, thank you to all that contributed.

@dex Starting to make sense. The only educator that did not have a problem is server based, but the one that used PC HWID (eg ID3) froze right away. Rhoit is not one of my educators. Thank you for the info.

@Gretta I have many years invested in learning Ninjatrader stuff, I would probably get major withdrawal symptoms if I switch now 😱. But I will look at Metatrader since you've gotten me curious. Anyway, I will continue trying different approaches by only loading one edu fix to find the culprit that's causing the TimeZone issue. Once isolated, I will contact the educator for support, and if I get none, I will scream his name from the rooftops to make buyers aware. Thank you again for your responses.

@mmicro I have another computer on the same feed running NT8 8.1.4.1 and works fine, no issues. Thank you for your input. @aotegaoteg I have several templates that I created and have used, but the problem remains. Thank you for taking the time to respond. @roddizon1978 Yes, that is the Ninjatrader support recommended procedure, but also no resolution. I also thank you for responding. @Gretta You may have given me some insight as the computers I upgraded are all educated NT8, by two distinct educators. Even though the educated products I purchased from them work, there were several shared on this forum that were not educated but shared with @apmoo to fix, but worked as is on NT8 8.1.4.1, but no longer work on NT8 8.1.5.2. This leads me to believe that changes have been made to the licensing method. @fryguy1 may have been on to something about something in a folder in documents/Ninjatrader 8. In the Config.xml file there is a line: NT8 8.1.5.2 "<TimeZoneInfoSerializable>UTC</TimeZoneInfoSerializable>" If I edit using Notepad to the line in: NT8 8.1.4.1 "<TimeZoneInfoSerializable> />" The charts display the correct hours/minutes for my timezone. The Settings remain with TimeZone UTC grayed out, but I can choose any timezone on the chart and it will display correctly. The only glitch I have found so far is with one educator's fix, everything works correctly. With another educator's fix, I lose all my sim accounts and am not able to add any sim accounts. Again, thank you all for responding and keep throwing out ideas, maybe WE can find a work around, or be stuck with NT8 8.1.4.1 forever.👏

@roddizon1978@fryguy1 Thank you both for responding. This is what it looks like in settings/tools: I looked in program files/ninjatrader and did not find any ini file. I'm surprised this is not a common problem cause it happened in 3 different computers. I may have to back out of 8.1.5.2 64-bit and fall back to 8.1.4.1-64 bit.

@apmoo PureMo has quit working " You Don't have a valid license" upon upgrade to NT8.1.5.2, but Cymo continues to work. I know you're up to your eyebrows in alligators, so as time allows, much appreciated.