NinZa Flex Trend Engine$

[Eva Grey]

https://ninza.co/new/flex-trend-engine

https://workupload.com/file/KbK8mCzgNfR

[JackSparrow440]

Thanks..... @Eva Grey.  🙂 

[TrooperBra]

@Eva Grey

 

I really liked this indicator. I'm automating it along with others; a confluence of indicators will yield good results.

There's only one thing I didn't like: when I plot this indicator, the chart becomes heavy and slow. Any other indicator in ninZa works perfectly; this one is slow. Is there anything that could be improved?

[sarutobi]

10 hours ago, Eva Grey said:

https://ninza.co/new/flex-trend-engine

https://workupload.com/file/KbK8mCzgNfR

Thanks eva!!!!

[Ninja_On_The_Roof]

5 hours ago, TrooperBra said:

@Eva Grey

 

I really liked this indicator. I'm automating it along with others; a confluence of indicators will yield good results.

There's only one thing I didn't like: when I plot this indicator, the chart becomes heavy and slow. Any other indicator in ninZa works perfectly; this one is slow. Is there anything that could be improved?

Maybe you have too many Ninza indicators on the same chart.

[Ninja_On_The_Roof]

Place a supertrend on your charts, adjust the multiplier settings, close enough to hug your candles, as support.

See if it is just the same.

[NQSniper]

Hey guys, I installed this in to NT but it doesn't work. Not sure if I missed something somewhere. ANy advice? Thanks! 

[Ninja_On_The_Roof]

1 hour ago, NQSniper said:

Hey guys, I installed this in to NT but it doesn't work. Not sure if I missed something somewhere. ANy advice? Thanks! 

 

Try to replace this file.

Copy it and paste it into your bin/custom folder.

https://limewire.com/d/9HgvF#NMeDzlPar2

[NQSniper]

18 minutes ago, Ninja_On_The_Roof said:

Try to replace this file.

Copy it and paste it into your bin/custom folder.

https://limewire.com/d/9HgvF#NMeDzlPar2

@Ninja_On_The_Roof - I replaced the .dll file with the one you shared and no dice. It actually killed another Ninza indy I was using....LMAO. Not sure what to do here. Looks like others had no problems. Any suggestions?

[Ninja_On_The_Roof]

47 minutes ago, NQSniper said:

@Ninja_On_The_Roof - I replaced the .dll file with the one you shared and no dice. It actually killed another Ninza indy I was using....LMAO. Not sure what to do here. Looks like others had no problems. Any suggestions?

Hmm...strange. 

Works fine on my end. No issues.

https://workupload.com/file/CTqYCGft5Yv

Try these now...Copy & paste them into correct folder.

Documents/NT8/Bin/Custom

[NQSniper]

18 minutes ago, Ninja_On_The_Roof said:

Hmm...strange. 

Works fine on my end. No issues.

https://workupload.com/file/CTqYCGft5Yv

Try these now...Copy & paste them into correct folder.

Documents/NT8/Bin/Custom

@Ninja_On_The_Roof - Thanks for the new file and all your help. Im getting ready to crash out but I'll load this on NT tomorrow morning and hopefully it will fix the issue. Thanks again for the assist bro. Have a good night. 😎

[Ninja_On_The_Roof]

2 hours ago, NQSniper said:

@Ninja_On_The_Roof - Thanks for the new file and all your help. Im getting ready to crash out but I'll load this on NT tomorrow morning and hopefully it will fix the issue. Thanks again for the assist bro. Have a good night. 😎

No problems at all buddy.

It is a headache playing with Ninza indies.

Lots of Ninza indicators are just repeats of similar Ninza stuff. Just different fancy names. Pretty much the same usual bright neon-color to attract...bees and ants.😜

Play with them a bit, you would find signals are fired at the same or close by places for each different indicator. 

You are not missing out on anything. Really!

Edited 1 hour ago by Ninja_On_The_Roof