TRADER Posted June 17 Report Posted June 17 unfortunately ,the indicator does not want to be displayed on the chart, @kimsam Quote
kimsam Posted June 17 Author Report Posted June 17 1 hour ago, TRADER said: unfortunately ,the indicator does not want to be displayed on the chart, @kimsam First load the indicator that u want.. then chose it from inside "Captain... chose signal input... that's it Quote
techfo Posted June 17 Report Posted June 17 10 hours ago, Ninja_On_The_Roof said: Kimsam forgot to warn you that, once you replace the resource file, the rest of your 100 other NinzaCo indicators might just stop breathing and kicking😇 so once you install the resource file, can you undo so that you can get back the other ninazo indicators that stopped working? What's the purpose of the resource file? Thanks Quote
Ninja_On_The_Roof Posted June 17 Report Posted June 17 2 hours ago, techfo said: so once you install the resource file, can you undo so that you can get back the other ninazo indicators that stopped working? What's the purpose of the resource file? Thanks Yes. Don't need to waste your precious time and uninstall Ninjatrader or to repair it. I see that some of you have gone through some great lengths to have this Optimus working. techfo 1 Quote
TRADER Posted June 17 Report Posted June 17 9 hours ago, kimsam said: First load the indicator that u want.. then chose it from inside "Captain... chose signal input... that's it https://workupload.com/file/ybAQUT6feU5 Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example. I hope you can help us @kimsam Quote
trader04 Posted June 17 Report Posted June 17 26 minutes ago, TRADER said: https://workupload.com/file/ybAQUT6feU5 Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example. I hope you can help us @kimsam I have the same problem Quote
kimsam Posted June 17 Author Report Posted June 17 40 minutes ago, TRADER said: https://workupload.com/file/ybAQUT6feU5 Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example. I hope you can help us @kimsam So it's not working with Optimus.. try another indicators. Quote
ampf Posted June 17 Report Posted June 17 1 hour ago, TRADER said: https://workupload.com/file/ybAQUT6feU5 Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example. I hope you can help us @kimsam WHat steps have you followed to have Optimus on the chart because I'm not even getting that. Can you tell me the steps assuming that was made a fresh installation. Some people here managed to run it others don't. Kindly share the process you went. Quote
TRADER Posted June 17 Report Posted June 17 30 minutes ago, ampf said: WHat steps have you followed to have Optimus on the chart because I'm not even getting that. Can you tell me the steps assuming that was made a fresh installation. Some people here managed to run it others don't. Kindly share the process you went. bro copy the dll of those ressources and dll of optimus and restart ur ninja Quote
ampf Posted June 17 Report Posted June 17 27 minutes ago, TRADER said: bro copy the dll of those ressources and dll of optimus and restart ur ninja I have done that multiples times but still not be able to get the indicator on the chart. Thats why I asked the steps as if a fresh install of NT8 was made because something is stopping the indicator to show up and I need to replicate the steps you took. Quote
ampf Posted June 17 Report Posted June 17 @TRADER Fresh NT8 install, copied the indicator, imported resources, restarted but still not having it Quote
kimsam Posted June 17 Author Report Posted June 17 5 hours ago, TRADER said: https://workupload.com/file/ybAQUT6feU5 Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example. I hope you can help us @kimsam What indicators u got in the list ? Quote
ampf Posted June 17 Report Posted June 17 50 minutes ago, kimsam said: What indicators u got in the list ? Simce I have reinstalled NT8 at this moment only have Optimus Firce but before that I have tried with Solar Wave Quote
Ninja_On_The_Roof Posted June 17 Report Posted June 17 10 hours ago, TRADER said: https://workupload.com/file/ybAQUT6feU5 Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example. I hope you can help us @kimsam As I have mentioned before somewhere, Optimus is limited to pick up any other of your indicators or third party ones that don't have some types of up/down arrows/signals for buy and sell. This is where PredatorXOrder has the advantage. Yes, it is a bit more complicated and time consuming to automate your indicators but it opens more doors for you to use other of your favorite indicators. Quote
Ninja_On_The_Roof Posted June 17 Report Posted June 17 (edited) 20 hours ago, techfo said: so once you install the resource file, can you undo so that you can get back the other ninazo indicators that stopped working? What's the purpose of the resource file? Thanks Hope this helps to ease your time a little bit in the process. Instead of uninstalling everything, your Ninjatrader, or to try to repair it, or to remove/delete everything else to get back all other NinzaCo working indicators that you have previously had on your PC, just do this: Important this ThunderZilla once again. Click YES to everything. https://limewire.com/d/D1cag#QuCF0hdkxJ This should "reset" everything back to previous stage and all of your other NinzaCo indicators should work again. One thing to be aware of once again, is that this will only work with all NinzaCo indicators that I have posted in previous posts. Any other NinzaCo indicators that are "educated" by someone else and when you replace the Resource file during installation, MIGHT NOT work. One example is the Pana Kanal indicator. This one was educated by Val. Thus, this won't be compatible with the Resource file that comes with above listed ThunderZilla. I just want to be clear on this so that you won't have any headaches or be wasting your time trying to import and un-import multiple Resource files over and over again on your end. In reality though, whether you have 10 or 20 of them indicators under your belt, you know that you would probably only choose 1 or 2 to actually use. That's the dilemma, trying to decide which one to have on your charts. They all look "amazing", alone by themselves, don't they? Hope this helps you a tiny bit. Happy Trading! Edited June 17 by Ninja_On_The_Roof techfo 1 Quote
kkreg Posted June 17 Report Posted June 17 Prove on the field that I'm wrong .... give this forum a tangible NT8 8.5 test completely working multi pc Unfortunately, it will not be able to provide it. Ninja_On_The_Roof 1 Quote
Ninja_On_The_Roof Posted June 17 Report Posted June 17 6 minutes ago, kkreg said: Prove on the field that I'm wrong .... give this forum a tangible NT8 8.5 test completely working multi pc Unfortunately, it will not be able to provide it. I am so confused! Quote
techfo Posted June 18 Report Posted June 18 3 hours ago, Ninja_On_The_Roof said: Hope this helps to ease your time a little bit in the process. Instead of uninstalling everything, your Ninjatrader, or to try to repair it, or to remove/delete everything else to get back all other NinzaCo working indicators that you have previously had on your PC, just do this: Important this ThunderZilla once again. Click YES to everything. https://limewire.com/d/D1cag#QuCF0hdkxJ This should "reset" everything back to previous stage and all of your other NinzaCo indicators should work again. One thing to be aware of once again, is that this will only work with all NinzaCo indicators that I have posted in previous posts. Any other NinzaCo indicators that are "educated" by someone else and when you replace the Resource file during installation, MIGHT NOT work. One example is the Pana Kanal indicator. This one was educated by Val. Thus, this won't be compatible with the Resource file that comes with above listed ThunderZilla. I just want to be clear on this so that you won't have any headaches or be wasting your time trying to import and un-import multiple Resource files over and over again on your end. In reality though, whether you have 10 or 20 of them indicators under your belt, you know that you would probably only choose 1 or 2 to actually use. That's the dilemma, trying to decide which one to have on your charts. They all look "amazing", alone by themselves, don't they? Hope this helps you a tiny bit. Happy Trading! Thanks, for the detailed info and heads up. . Will keep it in mind for the future. Quote
ampf Posted June 18 Report Posted June 18 14 hours ago, Ninja_On_The_Roof said: Hope this helps to ease your time a little bit in the process. Instead of uninstalling everything, your Ninjatrader, or to try to repair it, or to remove/delete everything else to get back all other NinzaCo working indicators that you have previously had on your PC, just do this: Important this ThunderZilla once again. Click YES to everything. https://limewire.com/d/D1cag#QuCF0hdkxJ This should "reset" everything back to previous stage and all of your other NinzaCo indicators should work again. One thing to be aware of once again, is that this will only work with all NinzaCo indicators that I have posted in previous posts. Any other NinzaCo indicators that are "educated" by someone else and when you replace the Resource file during installation, MIGHT NOT work. One example is the Pana Kanal indicator. This one was educated by Val. Thus, this won't be compatible with the Resource file that comes with above listed ThunderZilla. I just want to be clear on this so that you won't have any headaches or be wasting your time trying to import and un-import multiple Resource files over and over again on your end. In reality though, whether you have 10 or 20 of them indicators under your belt, you know that you would probably only choose 1 or 2 to actually use. That's the dilemma, trying to decide which one to have on your charts. They all look "amazing", alone by themselves, don't they? Hope this helps you a tiny bit. Happy Trading! Thank you @Ninja_On_The_Roof Thurnderzilla works with no issue but still not getting Optimus Force working. I will keep trying ampf 1 Quote
Ninja_On_The_Roof Posted June 19 Report Posted June 19 I guess, it is all about knowing exactly which Resource file to import. On top of it all, is to know where and when to click YES and or NO during the installation. Not that complicated and hard. Kimsam is a man with a few spoken words. He just wanna drive you guys nuts😂😆😀under the boiling hot summer heat.😬🙄😱 https://limewire.com/d/juZdJ#C1mk5bDijH kimsam 1 Quote
trader04 Posted June 19 Report Posted June 19 59 minutes ago, Ninja_On_The_Roof said: I guess, it is all about knowing exactly which Resource file to import. On top of it all, is to know where and when to click YES and or NO during the installation. Not that complicated and hard. Kimsam is a man with a few spoken words. He just wanna drive you guys nuts😂😆😀under the boiling hot summer heat.😬🙄😱 https://limewire.com/d/juZdJ#C1mk5bDijH U can share super jumpbust please @Ninja_On_The_Roof Quote
Ninja_On_The_Roof Posted June 19 Report Posted June 19 1 minute ago, trader04 said: U can share super jumpbust please @Ninja_On_The_Roof It is a piece of crap. Don't waste your time on it.🤗 misalto 1 Quote
ampf Posted July 3 Report Posted July 3 After all this time and after leave this indicator for a while, I tried it again and I was finally able to make it work with a few indicators but none of them from Ninza. @kimsam could you please see if there is any way to make it compatible with educated Ninza indicators? Thank you Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.