@Captain@Optimus@ninz

[TRADER]

unfortunately ,the indicator does not want to be displayed on the chart, @kimsam

[kimsam]

1 hour ago, TRADER said:

unfortunately ,the indicator does not want to be displayed on the chart, @kimsam

First load the indicator that u want.. then chose it from inside "Captain... chose signal input... that's it

[techfo]

10 hours ago, Ninja_On_The_Roof said:

Kimsam forgot to warn you that, once you replace the resource file, the rest of your 100 other NinzaCo indicators might just stop breathing and kicking😇

so once you install the resource file, can you undo so that you can get back the other ninazo indicators that stopped working?  

What's the purpose of the resource file?  Thanks

[Ninja_On_The_Roof]

2 hours ago, techfo said:

so once you install the resource file, can you undo so that you can get back the other ninazo indicators that stopped working?  

What's the purpose of the resource file?  Thanks

Yes.

Don't need to waste your precious time and uninstall Ninjatrader or to repair it. 

I see that some of you have gone through some great lengths to have this Optimus working.

 

[TRADER]

9 hours ago, kimsam said:

First load the indicator that u want.. then chose it from inside "Captain... chose signal input... that's it

https://workupload.com/file/ybAQUT6feU5

Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example.

I hope you can help us  @kimsam

[trader04]

26 minutes ago, TRADER said:

https://workupload.com/file/ybAQUT6feU5

Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example.

I hope you can help us  @kimsam

I have the same problem

[kimsam]

40 minutes ago, TRADER said:

https://workupload.com/file/ybAQUT6feU5

Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example.

I hope you can help us  @kimsam

So it's not working with Optimus..  try another indicators.

[ampf]

1 hour ago, TRADER said:

https://workupload.com/file/ybAQUT6feU5

Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example.

I hope you can help us  @kimsam

WHat steps have you followed to have Optimus on the chart because I'm not even getting that. Can you tell me the steps assuming that was made a fresh installation. Some people here managed to run it others don't. Kindly share the process you went.

[TRADER]

30 minutes ago, ampf said:

WHat steps have you followed to have Optimus on the chart because I'm not even getting that. Can you tell me the steps assuming that was made a fresh installation. Some people here managed to run it others don't. Kindly share the process you went.

bro copy the dll of those ressources and dll of optimus and restart ur ninja

[ampf]

27 minutes ago, TRADER said:

bro copy the dll of those ressources and dll of optimus and restart ur ninja

I have done that multiples times but still not be able to get the indicator on the chart. Thats why I asked the steps as if a fresh install of NT8 was made because something is stopping the indicator to show up and I need to replicate the steps you took.

[ampf]

@TRADER Fresh NT8 install, copied the indicator, imported resources, restarted but still not having it

[kimsam]

5 hours ago, TRADER said:

https://workupload.com/file/ybAQUT6feU5

Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example.

I hope you can help us  @kimsam

What indicators u got in the list ?

[ampf]

50 minutes ago, kimsam said:

What indicators u got in the list ?

Simce I have reinstalled NT8 at this moment only have Optimus Firce but before that I have tried with Solar Wave

[kimsam]

Try indicators shows signals

[Ninja_On_The_Roof]

10 hours ago, TRADER said:

https://workupload.com/file/ybAQUT6feU5

Yes, but the real problem is that the indicator does not appear inside the Optimus. Here is an example.

I hope you can help us  @kimsam

As I have mentioned before somewhere, Optimus is limited to pick up any other of your indicators or third party ones that don't have some types of up/down arrows/signals for buy and sell.

This is where PredatorXOrder has the advantage. Yes, it is a bit more complicated and time consuming to automate your indicators but it opens more doors for you to use other of your favorite indicators.

[Ninja_On_The_Roof]

20 hours ago, techfo said:

so once you install the resource file, can you undo so that you can get back the other ninazo indicators that stopped working?  

What's the purpose of the resource file?  Thanks

Hope this helps to ease your time a little bit in the process. 

Instead of uninstalling everything, your Ninjatrader, or to try to repair it, or to remove/delete everything else to get back all other NinzaCo working indicators that you have previously had on your PC, just do this:

Important this ThunderZilla once again. Click YES to everything.

https://limewire.com/d/D1cag#QuCF0hdkxJ

This should "reset" everything back to previous stage and all of your other NinzaCo indicators should work again.

One thing to be aware of once again, is that this will only work with all NinzaCo indicators that I have posted in previous posts.

Any other NinzaCo indicators that are "educated" by someone else and when you replace the Resource file during installation, MIGHT NOT work. 

One example is the Pana Kanal indicator. This one was educated by Val. Thus, this won't be compatible with the Resource file that comes with above listed ThunderZilla.

I just want to be clear on this so that you won't have any headaches or be wasting your time trying to import and un-import multiple Resource files over and over again on your end.

In reality though, whether you have 10 or 20 of them indicators under your belt, you know that you would probably only choose 1 or 2 to actually use.

That's the dilemma, trying to decide which one to have on your charts. They all look "amazing", alone by themselves, don't they?

Hope this helps you a tiny bit.

Happy Trading!

 

 

Edited 9 hours ago by Ninja_On_The_Roof

[kkreg]

Prove on the field that I'm wrong .... give this forum a tangible NT8 8.5 test completely working multi pc
Unfortunately, it will not be able to provide it.

[Ninja_On_The_Roof]

6 minutes ago, kkreg said:

Prove on the field that I'm wrong .... give this forum a tangible NT8 8.5 test completely working multi pc
Unfortunately, it will not be able to provide it.

I am so confused!

[techfo]

3 hours ago, Ninja_On_The_Roof said:

Hope this helps to ease your time a little bit in the process. 

Instead of uninstalling everything, your Ninjatrader, or to try to repair it, or to remove/delete everything else to get back all other NinzaCo working indicators that you have previously had on your PC, just do this:

Important this ThunderZilla once again. Click YES to everything.

https://limewire.com/d/D1cag#QuCF0hdkxJ

This should "reset" everything back to previous stage and all of your other NinzaCo indicators should work again.

One thing to be aware of once again, is that this will only work with all NinzaCo indicators that I have posted in previous posts.

Any other NinzaCo indicators that are "educated" by someone else and when you replace the Resource file during installation, MIGHT NOT work. 

One example is the Pana Kanal indicator. This one was educated by Val. Thus, this won't be compatible with the Resource file that comes with above listed ThunderZilla.

I just want to be clear on this so that you won't have any headaches or be wasting your time trying to import and un-import multiple Resource files over and over again on your end.

In reality though, whether you have 10 or 20 of them indicators under your belt, you know that you would probably only choose 1 or 2 to actually use.

That's the dilemma, trying to decide which one to have on your charts. They all look "amazing", alone by themselves, don't they?

Hope this helps you a tiny bit.

Happy Trading!

 

 

Thanks, for the detailed info and heads up. .  Will keep it in mind for the future. 

[Ninja_On_The_Roof]

Kimsam is a person with a few words😂