Multi-Timeframe Fu$ion

[ampf]

Can anyone unlock Multi-Timeframe Fu$ion from https://ninza.co/product/multi-timeframe-fusion

https://limewire.com/d/7MDeE#KJluGxIPU9

https://limewire.com/d/aSJp1#VxrOn5yv38

 

These were the files I have found

 

 

Thank you

[fxtrader99]

I have attached multi timeframe trend labels indicator. This shows the trend for multiple time frames as text in the chart panel. This may help with what you want.

MTFTrendLabels.zip

[ampf]

@fxtrader99 I thank you for the share unfortunately its not exactly what I was looking for. The interest on multi-timeframe fu$ion is that it can use time-frames that are not only minutes but also can be integrated on strategies. However once again thank you.

[atljam]

yes I second that, the ninza co Multi-Timeframe Fu$ion  if we can get some help removing the agile.net protection. 

Edited June 12 by atljam

[⭐ mangrad]

Agiledotnet is the hard one.

[ampf]

36 minutes ago, Ninja_On_The_Roof said:

Try it and let me know if this works.

https://limewire.com/d/ANeh1#dXdNDyU5f4

The trick is to replace the Resource file when asked during installation.

 

I have done just that despite is never too much remember, but after import the indcator, replace the resource file an restart ninjatrader I get an empty line as can be seen on the attached image. Did you successfuly installed the indicator? If you did I don't know what I can be doing wrong on my end.

[kimsam]

try this .. not tested.  https://limewire.com/d/KR1Xa#819lJ6LXrW

[ampf]

14 hours ago, Ninja_On_The_Roof said:

I am assuming that you already have some other NinzaCo indicators on your computer, yes?

 

I have tested both ways, with other ninza indicators and then I removed all them and installed only multi-timefram fu$ion but in both situations I got the same result.

[ampf]

13 hours ago, kimsam said:

try this .. not tested.  https://limewire.com/d/KR1Xa#819lJ6LXrW

I don't know about others, but I copied the file to de folder but is not being listed on the indicators.

[⭐ RichardGere]

I copied to bin/ custom folder.  But I could not find the indicator on the indicator list.  I am using NT 8.0.22

[atljam]

14 hours ago, kimsam said:

try this .. not tested.  https://limewire.com/d/KR1Xa#819lJ6LXrW

still not showing in available indicators but looking at the dll most all the source code is exposed in this dll

[ampf]

@Ninja_On_The_Roof Thank so much for your posts, for the help and for the share of all the indicators. I have finally the indicator working.

 

Once again thank you very much for all.

Edited June 14 by ampf

[atljam]

thanks

works

now

[techfo]

On 6/13/2025 at 9:03 PM, Ninja_On_The_Roof said:

Hello,

Some, not all, but quite enough to make you a millionaire trading.🥰

Just remember to follow the sequence.

Import ThunderZILLA first. 

Click YES to replace file when asked. (This of course, if you do have other previous NizaCo indicators on your PC)

The now continue to import others, whichever you desire, but be sure to click NO to everything afterwards.

I have tested them on my end, just to make sure they work on my charts. 

https://limewire.com/d/eSzOf#Lo2JIEgdhY

 

 

What is Thunderzilla?  Where do i find this? Do i have to extract the zip file first. 
Anybody help with this step.  maybe i'm missing very obvious thing

Edited June 15 by techfo

[shyan]

On 6/14/2025 at 9:03 AM, Ninja_On_The_Roof said:

Hello,

Some, not all, but quite enough to make you a millionaire trading.🥰

Just remember to follow the sequence.

Import ThunderZILLA first. 

Click YES to replace file when asked. (This of course, if you do have other previous NizaCo indicators on your PC)

The now continue to import others, whichever you desire, but be sure to click NO to everything afterwards.

I have tested them on my end, just to make sure they work on my charts. 

https://limewire.com/d/eSzOf#Lo2JIEgdhY

 

 

Need some help here, i dont know how to set it correctly...

Fusion is not like the OBOS show the colour..

[ampf]

I had the same issue. Just select the correct plots on the indicator and you will have the color dots.

Edited June 15 by ampf

[atljam]

how about ninza supertrend4u any one got? check out this use of fusion with supertrend4u as the signal, 

 

[techfo]

9 hours ago, Ninja_On_The_Roof said:

Download it.

Unzip folder twice since I compressed the files twice to decrease the size.

Inside the folder of NinzaCo Indicators, you should have the ThunderZilla.

Follow my previous posts instructions. Install ThunderZilla first then continue on from there.

Watch YouTube clips regarding Fusion, what it is and how to set it up correctly.

Understanding that, it is only compatible with other indicators on your PC (third party indicators or indicators from NinzaCo, etc...) that have some sort of "signal" types. 

 

 

 

Thanks for the instructions.  I extracted but there are 2 ThunderZilla files 
one is RenkoKings_ThunderZilla_NT8 and other RenkoKings_ThunderZilla_NT8-1

Which one should I import and what's the difference.  

[misalto]

choose 1 both are the same 

[⭐ rcarlos1947]

 

@Ninja_On_Da_Roof, wasn' sure which image captures your insight.

Either one is sad but true.

[misalto]

Yes i have tried everything under the sun nothing works algos outsmart the discretional trader only time both traders algos and retail  agree is at support and resistence ..build around there to have a 60% winner algo hold positions the most you can ,scalping 3 to 10 ticks go get a job better you will never make it   

[atljam]

like alligator on sniperbars, also using multi fusion with AuSuperSmootherFilter using 3 time frames, I use TradeSaber Predator as order mngnt system which allows Custom Entry Signals like the multi Fusion, yeah the ninza SuperTrend 4u was free but not a good signal compared to AuSuperSmoother another free indicator

 

[techfo]

21 hours ago, misalto said:

choose 1 both are the same 

ok thank you.

[techfo]

18 hours ago, Ninja_On_The_Roof said:

Any of these would be fine.

I might have added it twice in the folder. Sorry about that. 

Some more of NinzaCo stuff, again, not all but quite enough to make you a millionaire trading.

These should be straight and forwards as far as for installing. These wont ask you to replace anything.

Just import these the official and normal way as you would, using TOOL tab from your NT8. 

I have also tested. Included photos of them. They work fine on my end.

Happy trading.

 

https://limewire.com/d/Y5JoU#2xe2rUuEF9

ok thanks, thought i'd ask at the expense of it sounding like a very noob question.  
Appreciate the instructions and goodies. 

[cyb3r_trader]

2 hours ago, atljam said:

like alligator on sniperbars, also using multi fusion with AuSuperSmootherFilter using 3 time frames, I use TradeSaber Predator as order mngnt system which allows Custom Entry Signals like the multi Fusion, yeah the ninza SuperTrend 4u was free but not a good signal compared to AuSuperSmoother another free indicator

 

What settings do you have on the super smoother and which timeframes?