wave rider Posted July 29, 2019 Report Share Posted July 29, 2019 Plz provide MTP 8 Ninja add-on Thanks Quote Link to comment Share on other sites More sharing options...
cashm4x Posted September 17, 2019 Report Share Posted September 17, 2019 dear friends, please share working emulator for MTP 8 ninja add on. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
MPVP Posted September 22, 2019 Report Share Posted September 22, 2019 Plz provide MTP 8 Ninja add-on Thanks https://anonfile.com/w5s7z766n6/MTPSetupNT.8.0.3.0_rar I don't remember where in the forum I had seen the link, but luckily I saved it in favorites to share it. enjoy. ⭐ SignalTime, Traderbeauty, ⭐ moneyshare and 8 others 11 Quote Link to comment Share on other sites More sharing options...
cashm4x Posted September 22, 2019 Report Share Posted September 22, 2019 Thanks.. mine can only run for a while then frozen. But the market analyzer with MTP is running okay. any suggestion to fix this. Quote Link to comment Share on other sites More sharing options...
dave365 Posted October 9, 2019 Report Share Posted October 9, 2019 The link is not working please upload new link Quote Link to comment Share on other sites More sharing options...
⭐ SignalTime Posted October 9, 2019 Report Share Posted October 9, 2019 The link is not working please upload new link link is working Quote Link to comment Share on other sites More sharing options...
dave365 Posted October 10, 2019 Report Share Posted October 10, 2019 the problem is with my country iP, thanks it is downloaded now. Quote Link to comment Share on other sites More sharing options...
dave365 Posted October 10, 2019 Report Share Posted October 10, 2019 But the CHart is Forzen after applying Template Quote Link to comment Share on other sites More sharing options...
dave365 Posted October 10, 2019 Report Share Posted October 10, 2019 But the CHart is Forzen after applying Template. So after applying seperately new chart with adding MTP indicators it is working fine. ⭐ SignalTime 1 Quote Link to comment Share on other sites More sharing options...
⭐ Mberg Posted November 25, 2019 Report Share Posted November 25, 2019 Are they any newer versions of this indicator? Quote Link to comment Share on other sites More sharing options...
magicT Posted January 4, 2020 Report Share Posted January 4, 2020 Is there any value using this indicator ? Any feedback ? Quote Link to comment Share on other sites More sharing options...
Guest betrader Posted January 17, 2020 Report Share Posted January 17, 2020 Here is frozen too didnt work also after adding indicator. Any fixes?? Quote Link to comment Share on other sites More sharing options...
⭐ epictetus Posted February 23, 2020 Report Share Posted February 23, 2020 Here is frozen too didnt work also after adding indicator. Any fixes?? https://anonfile.com/w5s7z766n6/MTPSetupNT.8.0.3.0_rar The version at this address works fine in me, in NT8 Quote Link to comment Share on other sites More sharing options...
noonw Posted February 23, 2020 Report Share Posted February 23, 2020 https://anonfile.com/w5s7z766n6/MTPSetupNT.8.0.3.0_rar The version at this address works fine in me, in NT8 thanks This Andrey's stuff.... emu file is missing, NT7 version is missing, read the Install notes Quote Link to comment Share on other sites More sharing options...
⭐ epictetus Posted March 4, 2020 Report Share Posted March 4, 2020 (edited) Hello friends, thanks to this forum, I have had very good things. I would like to share a tip with you about using MtPredictor. When installing MtPredictor, consider the trend direction. Pay attention to the buy and sell signals to support and resistances, increasing the percentage of success very much. If you actively use the trailing stop part of the Ninja Trader program in short and long transactions, you can get high percentage transactions.You can determine the support and resistance points yourself or you can get support from the indicators. These are working well on the cryptocurrency exchange. It is useful to try and experience for other exchanges. Edit: By the way, I use the version shared on the site. As far as I know, there are no serious changes in the new version. As far as I know there is W setup instead of just Hg setup. But if I could, I would like to test the new version. Edited March 4, 2020 by epictetus Quote Link to comment Share on other sites More sharing options...
nengistelle Posted March 4, 2020 Report Share Posted March 4, 2020 CAn you share the working version? In the file that I have, there is not MTPLicEmu.cleaned.exe . Quote Link to comment Share on other sites More sharing options...
⭐ epictetus Posted March 4, 2020 Report Share Posted March 4, 2020 http://www.mediafire.com/file/nwxe9aq7zorzpv9/MTPSetupNT.8.0.3.0.rar/file I couldn't fully understand what you mean. My English is not very good. I share the running version that I use. You need to do everything written in the notebook during the installation. birdshoof, ⭐ goldeneagle1, Rhodan909 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
nengistelle Posted March 4, 2020 Report Share Posted March 4, 2020 "Copy folder "Emulator" into drive "C" and run file "c:\Emulator\MTPLicEmu.cleaned.exe" I recommend create shortcut on your desktop." Where is the MTPLicEmu.cleaned.exe file? Quote Link to comment Share on other sites More sharing options...
⭐ epictetus Posted March 4, 2020 Report Share Posted March 4, 2020 "Copy folder "Emulator" into drive "C" and run file "c:\Emulator\MTPLicEmu.cleaned.exe" I recommend create shortcut on your desktop." Where is the MTPLicEmu.cleaned.exe file? On the hard disk named c, you will create a folder named "emulator" and copy it there. You must run the program before you open Ninja Tradition. MTPLicEmu.cleaned.exe = MTP.exe okay. Quote Link to comment Share on other sites More sharing options...
nengistelle Posted March 4, 2020 Report Share Posted March 4, 2020 Which file must I copy to emulator folder? Quote Link to comment Share on other sites More sharing options...
⭐ epictetus Posted March 4, 2020 Report Share Posted March 4, 2020 Which file must I copy to emulator folder? Copy MTP.exe c: / emulator Quote Link to comment Share on other sites More sharing options...
nengistelle Posted March 4, 2020 Report Share Posted March 4, 2020 (edited) https://ibb.co/z4kc279 Passowd ? Email ? Edited March 4, 2020 by nengistelle Quote Link to comment Share on other sites More sharing options...
Guest anuraghsr Posted March 4, 2020 Report Share Posted March 4, 2020 Copy MTP.exe c: / emulator working with analyzer but not on chart plz give solution what to do Quote Link to comment Share on other sites More sharing options...
⭐ epictetus Posted March 4, 2020 Report Share Posted March 4, 2020 https://ibb.co/z4kc279 Passowd ? Email ? This version is the Ninja Trader 8 plugin. Why are you trying to apply crak to the independent version? First get Ninja Trader 8 and then install this plugin. Quote Link to comment Share on other sites More sharing options...
nengistelle Posted March 4, 2020 Report Share Posted March 4, 2020 ok,thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.