manihag Posted July 7, 2016 Report Share Posted July 7, 2016 looks like big stops are used vs. small targets... could you post a pic from chart(s) showing when/where/why a trade is executed? would be great if you could take some screenshots... thanks! Quote Link to comment Share on other sites More sharing options...
Bill A Posted July 7, 2016 Report Share Posted July 7, 2016 (edited) looks like big stops are used vs. small targets... could you post a pic from chart(s) showing when/where/why a trade is executed? I was in his room a few months back and he trades 2 contracts on CL with stops at 10-15 tics and his targets were 3 tics and a runner set to B/E once 3 tics hit. I tried to explain to him that a 5:1 RR ratio needs 83% success to breakeven - but he said he rarely has losers - yet the 5 days I was in the room he took mostly full losers every day with a few 3 tic winners !!! If you are a super scalper it maybe worth a try but the guy who runs the room ain't no super scalper he just talks mostly BS IMO. AND he definitely trades in SIM in the room - whenever he shows the trades you can easily see the "sim101" account identifyer Edited July 7, 2016 by Bill A ⭐ ESVepara, Watson Leung, ⭐ elishar and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Gretta Posted July 7, 2016 Report Share Posted July 7, 2016 He does trade sim. He's been pretty accurate on the days I was there as shown in the trade listing. Maybe he's gotten better from a couple of months ago. Quote Link to comment Share on other sites More sharing options...
manihag Posted July 7, 2016 Report Share Posted July 7, 2016 lol, sorry but he's definitely not "accurate" with MAE 13 ticks plus and targets from 2-3 ticks... hands off imo. Quote Link to comment Share on other sites More sharing options...
Gretta Posted July 8, 2016 Report Share Posted July 8, 2016 lol, sorry but he's definitely not "accurate" with MAE 13 ticks plus and targets from 2-3 ticks... hands off imo. While the MAE doesn't look great, the bottom line profit is there. As we know, most systems/rooms can't even get that far. Quote Link to comment Share on other sites More sharing options...
imfm Posted July 8, 2016 Report Share Posted July 8, 2016 Actually i scalp with the same ratio get 2 ticks stop 5 ticks with 2 contracts but i think you need transport ratios to weekly profits normally i have discipline daily stop average for 300$ 4 and weekly 700$ normally i get over 200$ after several trades bad days are when market is really near news or strange events normally i close machines for the day. and its true its necessary have highest accurate ratio this year im adding Order flow filtering to close trades before get stop hit and my Ratio is really good. im using a convination of volume microanalsys and order flow microanalisis to determinate if trade was bad trade and close inmediatly the order Quote Link to comment Share on other sites More sharing options...
imfm Posted July 8, 2016 Report Share Posted July 8, 2016 i think scalp cl is really a bad idea is a fast market with really fast move mt i recommend for ultra scalping Es reverberation and for more relax scalping YM and forgot to do thousands per week you get only some hundred per week Quote Link to comment Share on other sites More sharing options...
deltascalepr Posted October 5, 2017 Report Share Posted October 5, 2017 Pls educate [email protected]/file/ji3ry6 ⭐ timein 1 Quote Link to comment Share on other sites More sharing options...
⭐ trader1968 Posted October 5, 2017 Report Share Posted October 5, 2017 I think his archer indicator is based on pending orders on the book , so its a first in my book. Anyone has been in the room ? Would be nice to test them, if ayone has the time. Take care all Quote Link to comment Share on other sites More sharing options...
lbf4223 Posted October 5, 2017 Report Share Posted October 5, 2017 Why is his price ladder trading 6 CL contracts in SIM MODE in the vids? That's the biggest red flag in the world to tell you he's not trading...EVER. He's sitting back, taking in the 0% risk-free money from his victims, err, customers. ⭐ trader1968 and tryitagainmf 2 Quote Link to comment Share on other sites More sharing options...
⭐ trader1968 Posted October 6, 2017 Report Share Posted October 6, 2017 Yes i agree on that, all though he's been posting the trades since 2015 and hasn't changed the methodology much. https://www.youtube.com/channel/UCy6cbOBL89UpZEC5tKlyeBg/feed and the methodology seems ok it's concise and with very small stops, but i prefer the 5 min to gauge direction and trade longer trades. he trades 1 and 2 min and on oil is very volatile , but the trades he makes are ok, he goes for 6-20 ticks on the oil , i've been in the room, he trades 2 hours and he does have days with loss. I was as always interested in the indies and how we can check how they can fit in our setups and give any edge. So it would be nice if an educator could have a look at it. Take care all and good trading Quote Link to comment Share on other sites More sharing options...
⭐ trader1968 Posted October 7, 2017 Report Share Posted October 7, 2017 Bump gently, anyone can have a look in the weekend ? Take care Quote Link to comment Share on other sites More sharing options...
⭐ trader1968 Posted October 7, 2017 Report Share Posted October 7, 2017 (edited) Man as always....brilliant work \\m/ ^:)^ and i was getting edgy to the point that at my 50s for the first time i decided o have a go at it , i downloaded Reflector and reflexil to start ...man oh man Yea i know ...good luck with that , but as i said the targets if you see in the videos are really good because they are based on pending orders been pulled ;) so it shows the devious smart money, trying to lure us in, so i wanted to try it . Thanks man once again huge respect and thanks. take care and good w/e Edited October 7, 2017 by trader1968 Quote Link to comment Share on other sites More sharing options...
⭐ trader1968 Posted October 7, 2017 Report Share Posted October 7, 2017 look here what i mean, the targets plot real time and when they Stick they dont repaint ⭐ flipper26 1 Quote Link to comment Share on other sites More sharing options...
⭐ trader1968 Posted October 7, 2017 Report Share Posted October 7, 2017 Any instructions on how to import i have tried some ways to compile them and i got the zones and the bow to plot, any ideas or somebody can check. Thanks again Quote Link to comment Share on other sites More sharing options...
orfila Posted October 7, 2017 Report Share Posted October 7, 2017 place all in the indicator dir delete the dll you might have to turn off the computer and restart to force a compile of the NT Quote Link to comment Share on other sites More sharing options...
⭐ trader1968 Posted October 7, 2017 Report Share Posted October 7, 2017 place all in the indicator dir delete the dll you might have to turn off the computer and restart to force a compile of the NT orfila hi, and thanks for the effort, Did that, empty from dlls, and they wont compile they make errors, if i remove the ArcherPlatform_4.0.cP.cs they compile but only 2 of them work the Zones and the Bow (and this doen't look to plot like the one his chart displays), the other ones don't plot at all. Tried them on real time replay data, but they are not plotting as well. Any ideas ? :( Quote Link to comment Share on other sites More sharing options...
⭐ timein Posted October 7, 2017 Report Share Posted October 7, 2017 https://www.forexupload.com/3zf This link is for the chat room it still works for me, you could test it anytime to see if it works. https://www.omnovia.com/pages/sc2/room_login.php?companyID=27130&isPresenter=0&roomID=52634 Quote Link to comment Share on other sites More sharing options...
⭐ trader1968 Posted October 7, 2017 Report Share Posted October 7, 2017 This link is for the chat room it still works for me, you could test it anytime to see if it works. https://www.omnovia.com/pages/sc2/room_login.php?companyID=27130&isPresenter=0&roomID=52634 Hi there, Thanks for that, appreciate it, i was in the room and have recordings of the charts, but something is going on with the indies, either they don't compile or not plot , if anyone else can crosscheck it would be brilliant to see if its my pc. Thanks to all ⭐ timein 1 Quote Link to comment Share on other sites More sharing options...
orfila Posted October 7, 2017 Report Share Posted October 7, 2017 orfila hi, and thanks for the effort, Did that, empty from dlls, and they wont compile they make errors, if i remove the ArcherPlatform_4.0.cP.cs they compile but only 2 of them work the Zones and the Bow (and this doen't look to plot like the one his chart displays), the other ones don't plot at all. Tried them on real time replay data, but they are not plotting as well. Any ideas ? :( you need that file (ArcherPlatform_4.0.cP.cs) for sma2 to compile correctly and then the others compile. Again, you have to force a recompile by turning the computer "OFF" and the restarting it. This forces a recompile of NT basic dll's Quote Link to comment Share on other sites More sharing options...
⭐ trader1968 Posted October 8, 2017 Report Share Posted October 8, 2017 you need that file (ArcherPlatform_4.0.cP.cs) for sma2 to compile correctly and then the others compile. Again, you have to force a recompile by turning the computer "OFF" and the restarting it. This forces a recompile of NT basic dll's Thats what i am getting, and i tried it in any way to compile, but it won't, sma2 would compile also without the ArcherPlatform_4.0.cps Quote Link to comment Share on other sites More sharing options...
orfila Posted October 8, 2017 Report Share Posted October 8, 2017 I think you still have the original dll installed ... Quote Link to comment Share on other sites More sharing options...
⭐ trader1968 Posted October 10, 2017 Report Share Posted October 10, 2017 https://www.forexupload.com/3zf Hi all, can someone confirm if the indies compile ok on their Ninja ? Can't make them to work here no matter what i do :( Thanks all and especially orfila for the effort and help. Quote Link to comment Share on other sites More sharing options...
sateshchand Posted October 10, 2017 Report Share Posted October 10, 2017 fresh install but same error ⭐ trader1968 1 Quote Link to comment Share on other sites More sharing options...
⭐ trader1968 Posted October 10, 2017 Report Share Posted October 10, 2017 fresh install but same error yea me too, installed ninja from scratch on other machine, but they won't compile. Anyone can help with the indies ? Maybe orfila that educated them can help with the installation or have a look at them again in case theres something that can be done. Take care all Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.