ttat01 Posted June 21, 2013 Report Posted June 21, 2013 Can anyone modify VolumeProfileRange indicator from @cme Volume Profile Pack? I'm not a programmer but I suppose that both .cs and .dll should be modified. Is it difficult to do? I have some budget for such work. Quote
omaron Posted June 22, 2013 Report Posted June 22, 2013 The dll will have to be transformed in .cs first and then modified. Based on what you want modified and skills of the programmer, it can be harder or easier. Quote
ttat01 Posted June 22, 2013 Author Report Posted June 22, 2013 salmanyom I have less than 15 posts so I can't send PM. Please see screenshot http://gyazo.com/fc952f0a68f6e1031e73ef95fbf9efa8 There are two volume profiles, one is built based on ~100 bars and second on 6 bars. Size of these two volume profiles are almost the same, this is not good for me because I want to have 2nd profile proportionally smaller I don't want to see 2nd profile crossing right edge (see point D). Is it possible to indicate in % size of volume profile? Ex. if we indicate 50% of volume profile size it will be built as a half of A-B or C-D. I hope I clearly explained what I want. Quote
dennyyusuf Posted June 22, 2013 Report Posted June 22, 2013 ttat01,,would u please provide us with the indicator acmeVolumeProfileRange. Thanks Regards, Denny. Quote
ttat01 Posted June 22, 2013 Author Report Posted June 22, 2013 There is no separate VolumeProfileRange, but I can provide you the entire pack. http://[email protected]/file/xv5k4k Thanks for your time! Traderbeauty 1 Quote
gonzo Posted June 22, 2013 Report Posted June 22, 2013 @ttat01 can you better explain what you mean?..dory but im not understand.. Quote
ttat01 Posted June 23, 2013 Author Report Posted June 23, 2013 gonzo look at 2nd profile http://gyazo.com/fc952f0a68f6e1031e73ef95fbf9efa8 I want it to be built between C and D and shown here: http://gyazo.com/082c7829f65cbef8c2e06c492189c0de Quote
jharris Posted June 23, 2013 Report Posted June 23, 2013 You can ask at the NT support forum: http://ninjatrader.com/support/forum/forumdisplay.php?f=15 Or you can try to find someone who can do it at: elance.com freelancer.com odesk.com guru.com getacoder.com Quote
ttat01 Posted June 23, 2013 Author Report Posted June 23, 2013 (edited) I'm looking for programmer on this forum. If I don't find I'll visit websites above. Anyway, thanks for advices. Edited June 23, 2013 by ttat01 wrong preposition Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.