admis Posted April 22, 2015 Report Share Posted April 22, 2015 Hello admis, Which file did you modify to make this work. I am trying to learn to educate :) The same, which I sent you... Have you any experience in education? :-? Most of your expectations you can achieve by changing in this procedure: Emu1 -> NinjaTrader7 -> MyServer -> getLicenseFeatures() Gladiator858 1 Quote Link to comment Share on other sites More sharing options...
nnn123 Posted April 22, 2015 Report Share Posted April 22, 2015 Hi nn123- I don't use this but first thought is do U have a data connection to retrieve this data? Happy to help in any way I can(does not mean have solution) but will try-- for instance if Ur trying to use free End of Day data--will not work with any bar type except Daily bars?? anywhoo let us know sorry not more help Hi, This is happening way too many times. What I do to resolve, is to disconnect, repair the DB(Tools, options, data), then exit the NT and restart the whole thing. This does not always guarantee that all the charts will come up ok. If they do not, then I go through the same procedure again. I am just wondering if this has anything to do with the multiple types ? Thanks again for your help. Quote Link to comment Share on other sites More sharing options...
dsfasfsafafsa Posted April 22, 2015 Report Share Posted April 22, 2015 Hey i cant open your lic.emu +5000i have this error Unleaded exception has occurred in your application. if you click continue, the application will ignore this error and attempt to continue. could not load the file or assembly nt7 plugin version =1.0.0.0, clutrue =netral publickkeytoken=null or one of its dependencies the system cannot find the file specifed. Quote Link to comment Share on other sites More sharing options...
k33 Posted April 22, 2015 Report Share Posted April 22, 2015 same here on win 32 Quote Link to comment Share on other sites More sharing options...
admis Posted April 22, 2015 Report Share Posted April 22, 2015 @dsfasfsafafsa, @k33 What are you talking about and to whom? Would you be a little more precise... Quote Link to comment Share on other sites More sharing options...
k33 Posted April 22, 2015 Report Share Posted April 22, 2015 Hi admis, it is to whom has an idea to this. It is the errormessage i also get when starting the emu. The dl of config file doesn't work for me as well. Might be due to windows config or do others have it working in x32? Quote Link to comment Share on other sites More sharing options...
dsfasfsafafsa Posted April 22, 2015 Report Share Posted April 22, 2015 (edited) admis i guess this is to you... when trying to start your newest emu i get that error i posted. Im running windows 8 and a clean install of windows 8.1 and i get the same error. Do you need any other info from me? Thanks! k33 do you get the same error? Does someone know of a old version that doesn't have the -5000 tt credits bug? Edited April 22, 2015 by dsfasfsafafsa Quote Link to comment Share on other sites More sharing options...
k33 Posted April 22, 2015 Report Share Posted April 22, 2015 Yes same. But maybe i am missing some active scripting functions because of the use of xp-antispy.. I'll try again tomorrow. Thought it was due to less used x32 win but if u use 8.1 64bit that should be sorted out. Or are you on 32bit Windows, too. Quote Link to comment Share on other sites More sharing options...
dsfasfsafafsa Posted April 22, 2015 Report Share Posted April 22, 2015 i have windows 8 and 8.1 still cant open it. Quote Link to comment Share on other sites More sharing options...
admis Posted April 23, 2015 Report Share Posted April 23, 2015 You need to put most current NTConfig.xml and and nt7.plugin.dll file in the same folder as your Nt7LicEmu.exe (Nt7LicEmu5.06_balance5K$.exe or whatever is its name) is in... Port 80 must be free. In the other (previous) releases of NT7LicEmu you could create and edit the app.config file and assign your custom setting, but some programming genius has changed it... As I wrote, I don't use any emu's, but it's irrelevant what version of windows you have installed. It depends only on 80 port (check your firewall settings, especially when you use some exotic inventions without required understanding). k33 1 Quote Link to comment Share on other sites More sharing options...
k33 Posted April 23, 2015 Report Share Posted April 23, 2015 Thank you admis, now i have the port issue you described and opened port 80 in win firewall, disabled it, started after reboot with not other networkapp on (it seems).. i'll have to try some more this evening. other tips on this thread: http://indo-investasi.com/showthread.php/22222-New-Ninjatrader/page54?highlight=port Quote Link to comment Share on other sites More sharing options...
nnn123 Posted April 24, 2015 Report Share Posted April 24, 2015 Admis Need your help. It seems that I am only getting a single datafeed at a time. It seems that in the log, the thing is connecting to the NT server. I am using CQG datafeed. Here is when I had only YM charts showing up. http://c2n.me/3gHbuh9 Then I added TF in the other workspace, I get the following. http://c2n.me/3gHbT7R Then I created some more workspaces with diff. instruments. The last one was the CL. So, I now can see the CL but not the TF. I still have the following. http://c2n.me/3gHdkoy I have done the disconnect and DB repair numerous times without success. I am using "C:\Program Files (x86)\NinjaTrader 7\Nt7LicEmu\Nt7LicEmu5.06.exe" and the NT and these are run as admin. I had the latest NTconfig when installed. So, I am not sure what is happening and will appreciate your help. Thanks. Quote Link to comment Share on other sites More sharing options...
admis Posted April 24, 2015 Report Share Posted April 24, 2015 Admis Need your help. It seems that I am only getting a single datafeed at a time. It seems that in the log, the thing is connecting to the NT server. I am using CQG datafeed. Here is when I had only YM charts showing up. http://c2n.me/3gHbuh9 Then I added TF in the other workspace, I get the following. http://c2n.me/3gHbT7R Then I created some more workspaces with diff. instruments. The last one was the CL. So, I now can see the CL but not the TF. I still have the following. http://c2n.me/3gHdkoy I have done the disconnect and DB repair numerous times without success. I am using "C:\Program Files (x86)\NinjaTrader 7\Nt7LicEmu\Nt7LicEmu5.06.exe" and the NT and these are run as admin. I had the latest NTconfig when installed. So, I am not sure what is happening and will appreciate your help. Thanks. I'm not sure, whether I can help you... Your screenshots are so tiny... I don't know, which exactly release of Nt7LicEmu5.06.exe are you using? Send me PM with your log and I'll see, but please, keep in mind, I can't resolve any issues related to the EMU, cause: - I'm NOT the author and I don't use it. nnn123 1 Quote Link to comment Share on other sites More sharing options...
comeinvest Posted April 25, 2015 Report Share Posted April 25, 2015 (edited) if anyone got problem with installation, i suggest you might try the installation instruction below. Hope it will help if you need any instruction to fully uninstall ninjatrader , can follow the link here ( ) 1) Install from .msi NinjaTrader 7.22 2) Install the automated educator (credit to Andy ) --> http://indo-investasi.com/showthread.php/22222-New-Ninjatrader?p=365019&viewfull=1#post365019 3) Extract the Nt7LicEmu5.06_adj_bal.zip(Nt7LicEmu5.06_balance5K$.exe) and rename it as Nt7LicEmu5.06.exe inside Nt7LicEmu Folder (credit to Admis to solve -5K TT problem) --> http://indo-investasi.com/showthread.php/22222-New-Ninjatrader?p=367950&viewfull=1#post367950 4) Run NinjaTrader :) Edited April 25, 2015 by comeinvest andyshooktrader, nnn123 and k33 3 Quote Link to comment Share on other sites More sharing options...
nnn123 Posted April 25, 2015 Report Share Posted April 25, 2015 Hi Admis n ComeInvest, Thanks for your suggestions and help. I reinstalled and restarted the NT and it is working for now. Thanks again. Quote Link to comment Share on other sites More sharing options...
nnn123 Posted April 29, 2015 Report Share Posted April 29, 2015 Hi Admis n ComeInvest, Thanks for your suggestions and help. I reinstalled and restarted the NT and it is working for now. Thanks again. As they say, famous last word.... Well, the problem isn't solved and I am not sure what to do. What did I do initially, I installed NT7v22 and then installed March Edu EMU5.06 after copyuing into the c:\prog86\NT7 Then I had prepared a shortcut for both the Emu and NT and to run as an ADMIN I modified HOSTS by adding the following lines. 208.48.16.140 ds2.ninjatrader.com 208.48.16.130 ds10.ninjatrader.com 127.0.0.1 ds2.ninjatrader.com 127.0.0.1 ds10.ninjatrader.com Now, if I am offline and change the instrument, no problem. If connected and I do it, I get the above shown problem. Another issue is that if I change an instrument and go back to original, then it still shows only a tick value (e.g. From CL, which was ok to NQ, I see 0.25, and go back to CL and I see 0.1 Do you think I need to start afresh? Thanks In Advance Quote Link to comment Share on other sites More sharing options...
admis Posted April 29, 2015 Report Share Posted April 29, 2015 As they say, famous last word.... Well, the problem isn't solved and I am not sure what to do. ... Thanks In Advance Did you try to restore the original file (not patched): NinjaTrader.Core.dll in the 3 following folders: c:\Program Files (x86)\NinjaTrader 7\bin\ c:\Program Files (x86)\NinjaTrader 7\bin\X64\ c:\Program Files (x86)\NinjaTrader 7\bin64\ ... and run NT without emu? All NT exclusions in the host file should be disabled. First of all, you have to be sure, that your standard (legit) installation of NT is working properly before applying patch or emu. nnn123 1 Quote Link to comment Share on other sites More sharing options...
nnn123 Posted April 29, 2015 Report Share Posted April 29, 2015 (edited) Did you try to restore the original file (not patched): NinjaTrader.Core.dll in the 3 following folders: c:\Program Files (x86)\NinjaTrader 7\bin\ c:\Program Files (x86)\NinjaTrader 7\bin\X64\ c:\Program Files (x86)\NinjaTrader 7\bin64\ ... and run NT without emu? All NT exclusions in the host file should be disabled. First of all, you have to be sure, that your standard (legit) installation of NT is working properly before applying patch or emu. Hi Admis, I took your advise and went back to the basic. Cleaned NT and reinstalled and went through all the steps again and I am up and running. However, it went bad. So, I went and had a look in the LOG. It seems that you have to switch the connection to the HDS2 and HDS10 off. e.g. #208.48.16.140 ds2.n..jat..der.com #208.48.16.130 ds10.n..jat..der.com 127.0.0.1 HDS2.n..jat..der.com 127.0.0.1 HDS10.n..jat..der.com Thanks for your help. Edited April 29, 2015 by nnn123 Quote Link to comment Share on other sites More sharing options...
nnn123 Posted April 29, 2015 Report Share Posted April 29, 2015 OK, So, now what? I have disabled the connections and I opened a new chart with ES and this is what I got,, http://c2n.me/3gWYmU9 Obviously, this gap is due to not having connection to NT. Solution: Connect to NT server and upload the data and then disconnect. Does anyone have a different solution as the above option seems a bit complicated. Thanks again. Quote Link to comment Share on other sites More sharing options...
admis Posted April 29, 2015 Report Share Posted April 29, 2015 Try to change the session template (<use instrument settings> or Default 24/7); Or press on the chart: <Ctrl-Shift-R> "Reload All Historical Data" Quote Link to comment Share on other sites More sharing options...
comeinvest Posted April 30, 2015 Report Share Posted April 30, 2015 As they say, famous last word.... Well, the problem isn't solved and I am not sure what to do. What did I do initially, I installed NT7v22 and then installed March Edu EMU5.06 after copyuing into the c:\prog86\NT7 Then I had prepared a shortcut for both the Emu and NT and to run as an ADMIN I modified HOSTS by adding the following lines. 208.48.16.140 ds2.ninjatrader.com 208.48.16.130 ds10.ninjatrader.com 127.0.0.1 ds2.ninjatrader.com 127.0.0.1 ds10.ninjatrader.com Now, if I am offline and change the instrument, no problem. If connected and I do it, I get the above shown problem. Another issue is that if I change an instrument and go back to original, then it still shows only a tick value (e.g. From CL, which was ok to NQ, I see 0.25, and go back to CL and I see 0.1 Do you think I need to start afresh? Thanks In Advance would like to know why you need to prepare shortcut and modified host by adding additional lines ? would like to know where you got such guidelines ? Quote Link to comment Share on other sites More sharing options...
nnn123 Posted April 30, 2015 Report Share Posted April 30, 2015 would like to know why you need to prepare shortcut and modified host by adding additional lines ? would like to know where you got such guidelines ? I read through this thread and it was mentioned within this thread. What made me use this option was when I wrote above statement that when I am disconnected, I can see the data but not when connected. So, I worked out that I need to place the code in the HOSTS. Also, the log showed me where it was connecting. I hope this is as clear as mud. LOL. Sorry that I cannot be more specific than that. Quote Link to comment Share on other sites More sharing options...
nnn123 Posted April 30, 2015 Report Share Posted April 30, 2015 (edited) would like to know why you need to prepare shortcut and modified host by adding additional lines ? would like to know where you got such guidelines ? The shortcut was placed on the desktop to activate the programs (EMU and NT7), this was also suggested on this thread. I read through this thread and it was mentioned within this thread. What made me use this option was when I wrote above statement that when I am disconnected, I can see the data but not when connected. So, I worked out that I need to place the code in the HOSTS. Also, the log showed me where it was connecting. I hope this is as clear as mud. LOL. Sorry that I cannot be more specific than that. ComeInvest: Did your installation work without any problem? Edited April 30, 2015 by nnn123 Quote Link to comment Share on other sites More sharing options...
comeinvest Posted April 30, 2015 Report Share Posted April 30, 2015 The shortcut was placed on the desktop to activate the programs (EMU and NT7), this was also suggested on this thread. I read through this thread and it was mentioned within this thread. What made me use this option was when I wrote above statement that when I am disconnected, I can see the data but not when connected. So, I worked out that I need to place the code in the HOSTS. Also, the log showed me where it was connecting. I hope this is as clear as mud. LOL. Sorry that I cannot be more specific than that. ComeInvest: Did your installation work without any problem? yes, my installation don't have any problem. i didn't modified anything because the emu should have take care the things that's required (someone correct me if i'm wrong). try to follow my previous instruction again without modify anything. Quote Link to comment Share on other sites More sharing options...
admis Posted May 3, 2015 Report Share Posted May 3, 2015 @nnn123: You've asked me in PM about some C# tutorials. I thought, it can be interesting also for other members: http://www.csharp-station.com/Tutorial/CSharp/ newbie0101, RICHI, k33 and 8 others 11 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.