⭐ samsammy Posted October 15, 2019 Report Posted October 15, 2019 Hello.. I hope some kind person can provide a simple answer... can we TRADE LIVE on the cracked NT .37? Yes or No? I installed it but it won't allow going off global simulation mode to place a live order... so, if we can't trade live, what is the advantage of using cracked version? Years ago I had cracked NT version that allowed live, but it had a license check emulator that had to be run. Current NT7 cracks dont seem to have this anymore, so I'm confused if it can trade live... thanks for answer. Quote
eros1973ms Posted December 30, 2019 Report Posted December 30, 2019 hi all, I have the same question as samsammy: is there an educated version of NT7 that allows realtime trading multibroker? not interested in order flow. thanks! Quote
eros1973ms Posted December 30, 2019 Report Posted December 30, 2019 hi all, I have the same question as samsammy: is there an educated version of NT7 that allows realtime trading multibroker? not interested in order flow. thanks! I do like Marzullo :) link at post #1318 is working, version 33 educated Quote
⭐ puwing Posted January 26, 2020 Report Posted January 26, 2020 V37 stopped working again. Can anyone confirm? Quote
⭐ Meow Posted January 27, 2020 Report Posted January 27, 2020 V37 stopped working again. Can anyone confirm? I've got this error: Login failed: The FCM you are trying to connect to is not authorized to use Ninja Trader with CQG. Is it same for you? Quote
tomtom69 Posted January 27, 2020 Report Posted January 27, 2020 I've got this error: Login failed: The FCM you are trying to connect to is not authorized to use Ninja Trader with CQG. Is it same for you? i got the issue here too Quote
orfila Posted January 27, 2020 Report Posted January 27, 2020 This happened about a year back. After changing versions it seemed to work for some. I sent a few emails to AMP and after a couple of days it was fixed. Seems that they did a software update that breaks the connection, it has to do with the addresses for the data in the ntconfig.xml file being different than the servers. give it a few days and they'll catch up after enough complaints... ⭐ trim and k33 2 Quote
⭐ nadjib Posted January 27, 2020 Report Posted January 27, 2020 (edited) same error Login failed: The FCM you are trying to connect to is not authorized to use Ninja Trader with ninjatrader continuum , ninja was disable n37 it work with ninjatrader 40 connection Edited January 28, 2020 by nadjib Quote
⭐ mizir_99 Posted January 29, 2020 Report Posted January 29, 2020 (edited) .......... Edited January 29, 2020 by mizir_99 Quote
⭐ Meow Posted January 29, 2020 Report Posted January 29, 2020 same error Login failed: The FCM you are trying to connect to is not authorized to use Ninja Trader with ninjatrader continuum , ninja was disable n37 it work with ninjatrader 40 connection Can you upload the 40 please? Quote
⭐ nadjib Posted January 29, 2020 Report Posted January 29, 2020 so ninjatrader can manipulate their platform therefore manipulate graphics or even disadvantage very bad news users, it not cracked yet v 40 Quote
⭐ mizir_99 Posted January 29, 2020 Report Posted January 29, 2020 so ninjatrader can manipulate their platform therefore manipulate graphics or even disadvantage very bad news users, it not cracked yet v 40 this guy says he has ver .40 educated Quote
gdigger Posted January 29, 2020 Report Posted January 29, 2020 also says has nt8 https://www.prayogo-soft.com/ Quote
gdigger Posted January 29, 2020 Report Posted January 29, 2020 duplicate this forum has that i can see delete post Quote
⭐ trim Posted January 30, 2020 Report Posted January 30, 2020 Magician required to educate v40 and to maintain this forum alive, otherwise, it will become an online store. ⭐ flipper26 and ⭐ nadjib 2 Quote
orfila Posted January 31, 2020 Report Posted January 31, 2020 Magician required to educate v40 and to maintain this forum alive, otherwise, it will become an online store. V34 works ok k33 and tomtom69 2 Quote
⭐ trim Posted February 3, 2020 Report Posted February 3, 2020 V34 works ok V34 IS NOT working. It works only the connection, but the routing of orders does not work. As I said, we need a magician here to help out. Quote
k33 Posted February 4, 2020 Report Posted February 4, 2020 Same here, tried also 37 and 31, also with new ntconfig file Quote
⭐ topstep Posted February 4, 2020 Report Posted February 4, 2020 I know one way to get around all these problems ! JUST GO TO NT8 :D NT7 is done ! ! Quote
k33 Posted February 4, 2020 Report Posted February 4, 2020 This happened about a year back. After changing versions it seemed to work for some. I sent a few emails to AMP and after a couple of days it was fixed. Seems that they did a software update that breaks the connection, it has to do with the addresses for the data in the ntconfig.xml file being different than the servers. give it a few days and they'll catch up after enough complaints... I think this is really due to changed server adresses, my NT was working again without changes back then. I am a bit upset with these planned obsolence issues, banning AMP, disabling direct licenses, making customers a lot of trouble and work. NT8 is probably as much work to migrate than Sierracharts with my analysis and I won´t go where broker and software is in the same hands. ⭐ trim and ⭐ nadjib 2 Quote
⭐ trim Posted February 4, 2020 Report Posted February 4, 2020 I know one way to get around all these problems ! JUST GO TO NT8 :D NT7 is done ! ! Do you have the medicine for Nt8? Quote
orfila Posted February 4, 2020 Report Posted February 4, 2020 They all work with IB and TD, just not CQG so the problem is the data provider not NT7. I have been slowly moving my indis to NT8 just hope medicine will come soon... Quote
⭐ trim Posted February 5, 2020 Report Posted February 5, 2020 (edited) They all work with IB and TD, just not CQG so the problem is the data provider not NT7. I have been slowly moving my indis to NT8 just hope medicine will come soon... Not only CQG, also Rithmic. Yep, medicine would be very good. Edited February 5, 2020 by trim Quote
k33 Posted February 5, 2020 Report Posted February 5, 2020 (edited) Maybe an update of the cqg/rithmic files/certificates might do? But the failure message is about FCM and not dataprovider and IB and TD are different brokers. Edited February 5, 2020 by k33 fcm ⭐ trim 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.