admis Posted June 20, 2015 Report Posted June 20, 2015 I have an update on the above NT7 issue - It doesn't seem to be problem with 32 vs 64 bit Windows. My current educ@ted installation is on Windows XP. When I tried to install it on Windows 7 64 bit, I have the above issue. I also tried it on windows 7 32 bit, the problem is the same as the 64 bit issue above. Is there a difference in the way the educ@ted NT7 works on Windows XP versus Windows 7. Please advise. Thanks! First of all try to install and run the regular release of NT (22) without any emu's using AMP/CQG license Key: @AMP-CQG4-D583-40B1-AE74-B79F-705D-7777 ⭐ goldeneagle1 1 Quote
⭐ goldeneagle1 Posted June 20, 2015 Report Posted June 20, 2015 Thank you so much admis! Yes, I cleaned up the first install and re-installed NTv22 with the above AMP key. No errors reported! Does Emu5.06 have a problem with Windows 7? :-( Quote
⭐ goldeneagle1 Posted June 20, 2015 Report Posted June 20, 2015 Ok, solved this one :-) Emu5.06 (dated 05.2014) works only in Windows XP. Emu5.06 (dated 03.2015) is needed on Windows 7. Quote
admis Posted June 20, 2015 Report Posted June 20, 2015 Ok, solved this one :-) Emu5.06 (dated 05.2014) works only in Windows XP. Emu5.06 (dated 03.2015) is needed on Windows 7. As I don't use any emu's I can't give you the right answer, but you can pack and upload both of the emu's you've tried and I'll try to check them out... Mari Diluce and ⭐ goldeneagle1 2 Quote
⭐ goldeneagle1 Posted June 22, 2015 Report Posted June 22, 2015 Hi admis - Never mind. It was a matter of "Run as Administr@t0r" issue :-( In XP, that wasn't a problem. But in Win7, I see that we run the Emu with admin privilege... I suppose to use port 80... I very much appreciate your help! admis 1 Quote
snaiper-x1 Posted June 30, 2015 Report Posted June 30, 2015 if anyone got problem with installation, i suggest you might try the installation instruction below. Hope it will help if you need any instruction to fully uninstall ninjatrader , can follow the link here ( ) not to search for the remaining folders and debris after removing the software should be installed through => UninstallTool => Install and trace [spoiler=+]http://abload.de/img/kuio2sws.gif Quote
nnn123 Posted July 17, 2015 Report Posted July 17, 2015 My biggest issues by far are performance and support. Other platforms have standard features (ex. footprint, market profile) that in Ninja require 3rd party add-ons. Have always had issues with performance in Ninja - the DOM lags as compared to say ****** which presents issues with order execution. My workspace and chart regularly freeze or crash (some improvement on 64 bit but still unacceptable) and is untradeable during periods of high volatility. I run one workspace with max 10 charts (daily, 60 min, 15 min are pretty basic), and whenever possible have my indicators set to update on bar close, as "true". Every so often I have a workspace become corrupt and have to spend the time to recreate it. I’ve gone through various forums, suggestions on the Ninja support site to change anything I can to improve performance but haven’t been able to see any significant improvements. I run a computer dedicated to trading only, lots of memory and power so none of this should be an issue. I've done troubleshooting on my internet connection/provider, router, had servicemen come in and don't have problems on other applications so I believe the issue is Ninja although they deny it. Ninja being single-threaded rather than multi-threaded doesn’t help with performance either. Some of these issues may be dealt with in NT8 but I’ve dealt with these problems for years now and who knows how NT8 will perform when it is ever finally released. For the time, education, money, frustration invested all these years in Ninja, I just feel I’d be better off if I went with a different platform when I was starting out. On their support forums you rarely find an answer to a problem, they always ask people to send in log and trace files so you can't troubleshoot anything yourself (for common problems) and have to wait to go through support. When you do deal with support they frequently ask to have access to your computer (I don't like to give anyone access to my computer even if they are support) and then they snoop around outside the areas they should be looking (know this for a fact). With this new brokerage business they no longer allow Canadians whereas long-time business partners AMP and Optimus did. I also heard their Brokerage support was poor but can't speak to this personally. Hi Flipper, One of the solution to the Workspace is keep a copy of it. That way, whenever, it crashes, load up the backup and save it. That should reduce this issue. I have a QUAD and I was getting freeze and all that. My brother asked me to put a fan in front of it and it is keeping the CPU cooler and that is helping at present. We tried to max out the MEM (8gb) and the CPU QUAD 2.4gb and it stayed stable. But, I am sure it will freeze at some point but this is one of the solution. As ADMIS stated, the FELTON coding is bad, I am sure others are in the similar fashion. So, you will have to leave with it. I think one of the idea is that try to keep only those INDICs and DLL around that you need in the Document NT folder (NOTE: it is only an idea). My thinking of this is because of the time it takes when you go into the EDIT INdics. Anyway, I hope some of these helps. Quote
microsat2 Posted July 23, 2015 Report Posted July 23, 2015 Has anyone detected trojan (HEUR/QVM03.0.Malware.Gen) in the Emu?.??.exe? Especially when it starts running. Ok, solved this one :-) Emu5.06 (dated 05.2014) works only in Windows XP. Emu5.06 (dated 03.2015) is needed on Windows 7. Quote
khnco Posted July 30, 2015 Report Posted July 30, 2015 I am getting disconnects in the middle of the night 1-3 times a week. Usually happens between 1-6am. I got a trace log: 2015-07-30 02:05:39:687 (Kinetic) Kinetick.Adapter.connectionTimer: reconnecting to level1 by closing the socket, socket!=NULL 2015-07-30 02:05:39:687 (Kinetic) Kinetick.Adapter.connectionTimer: level1 socket closed 2015-07-30 02:05:39:687 (Kinetic) Kinetick.Adapter.L1Worker: restarting L1 thread after connection loss... 2015-07-30 02:05:39:687 (Kinetic) Cbi.Connection.ProcessEventArgs.ConnectionStatusEventArgs ConnectionLost ConnectionLost NoError Unexpected disconnect from level1 data server. Trying to reconnect... 2015-07-30 02:06:10:022 (Kinetic) Kinetick.Adapter.L1Worker: started L1 thread 2015-07-30 02:06:10:022 (Kinetic) Cbi.Connection.ProcessEventArgs.ConnectionStatusEventArgs Connected Connected NoError 2015-07-30 02:06:10:022 (Kinetic) Cbi.ConnectionStatusEventArgs.Process: ConnectionLost ConnectionLost 2015-07-30 02:06:10:038 (Kinetic) Cbi.ConnectionStatusEventArgs.Process: Connected Connected 2015-07-30 02:06:10:102 (Kinetic) Kinetick.Adapter.L1Worker: restarting L1 thread after connection loss... 2015-07-30 02:06:10:102 (Kinetic) Cbi.Connection.ProcessEventArgs.ConnectionStatusEventArgs ConnectionLost ConnectionLost NoError Unexpected disconnect from level1 data server. Trying to reconnect... 2015-07-30 02:06:10:170 (Kinetic) Kinetick.Adapter.L1Worker: started L1 thread Anyone know what could be causing this? One ninjatrader disconnects it doesnt reconnect back to kinetick and I loose GOMICD data that cant be downloaded. Quote
kishisaki Posted July 31, 2015 Report Posted July 31, 2015 Hello Everyone, Any one know a fix for this under Windows 10 Pro 64-bit? http://screencast.com/t/Sarw9ap01Hpn Best Regards. Quote
lbf4223 Posted July 31, 2015 Report Posted July 31, 2015 Hello Everyone, Any one know a fix for this under Windows 10 Pro 64-bit? http://screencast.com/t/Sarw9ap01Hpn Best Regards. Try #658 to find out if some other program is listening on port 80 Quote
FrankM Posted July 31, 2015 Report Posted July 31, 2015 Skype sometimes plays with the port.. if you have it open close it down and try. Quote
kishisaki Posted July 31, 2015 Report Posted July 31, 2015 LOL Windows 10, figures, it installs IIS and ASP .NET Developer by default now, for regular consumer of all people ;D It didn't occur to me at first that IIS would be installed by default so that's what causes the Emu to go off, and no it didn't show up at all on port listening. so just had to unchecked all those unneeded features and works as it should. So now you all know what to do when upgrading to Windows 10 ;D iksak, k33 and ⭐ aotegaoteg 3 Quote
crutator Posted August 14, 2015 Report Posted August 14, 2015 Does someone have NinjaTrader v8.0.0.3 installer and ready to share ? Thanks guys iwahc and trade4500 2 Quote
marketrulez Posted August 23, 2015 Report Posted August 23, 2015 Can someone please share the v22 of NT installer, the existing link here in the thread is not working anymore. Thanks in advance. Quote
⭐ laser1000it Posted August 23, 2015 Report Posted August 23, 2015 Can someone please share the v22 of NT installer, the existing link here in the thread is not working anymore. Thanks in advance. I've found this : http://[email protected]/file/0ItiIhqPce/ninjatrader_cracking_-0_701000.html (not tested) marketrulez 1 Quote
⭐ santoshv2k Posted August 23, 2015 Report Posted August 23, 2015 Can someone please share the v22 of NT installer, the existing link here in the thread is not working anymore. Thanks in advance. If you need full package ***.msi of v28 or v29, it's there on NT site. If you need specially v22, let the forum members know the reason, someone may certainly help you marketrulez 1 Quote
marketrulez Posted August 23, 2015 Report Posted August 23, 2015 If you need full package ***.msi of v28 or v29, it's there on NT site. If you need specially v22, let the forum members know the reason, someone may certainly help you The only reason I am looking for v22, is because I guess the educated files work with v22, atleast in this thread thats what I have seen that it works and instructions also seem to indicate that. Hence, looking for v22, it would be great if someone can share it, the existing links are not working. Quote
Trader99 Posted August 23, 2015 Report Posted August 23, 2015 Here you go.... http://[email protected]/zip/mXrpUbvfce/NT722educator.html T99 marketrulez and ⭐ sisirchow 2 Quote
marketrulez Posted August 23, 2015 Report Posted August 23, 2015 Here you go.... http://[email protected]/zip/mXrpUbvfce/NT722educator.html T99 Thank you so much!! Cheers! Quote
⭐ bomdila Posted August 24, 2015 Report Posted August 24, 2015 I was using NinjaTrader 7.0.1000.22 with emu and getting live data from CQG. Yesterday, I upgraded to 7.0.1000.29, now I am not getting live data from CQG, however I get connected to CQG and getting history data also. Can someone suggest if I need to revert back to NinjaTrader 7.0.1000.22 or any last working version. Quote
thaomoua Posted August 24, 2015 Report Posted August 24, 2015 Two options: call CQG and ask them why you're not getting data with .29; or just reinstall .22. You won't loose your data or anything. Quote
⭐ santoshv2k Posted August 24, 2015 Report Posted August 24, 2015 (edited) Now working after re-installation Edited August 24, 2015 by santoshv2k Quote
⭐ moncar Posted August 24, 2015 Report Posted August 24, 2015 Any license key for NT22 or how to revert to NT22 beacause NT29 is not working with some indicators. Thank you. I was using NT14 and trying to install NT22 but asking for a valid License. Any help would be apreciated Quote
⭐ moncar Posted August 25, 2015 Report Posted August 25, 2015 I need a valid license key for NT22. Anyone please Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.