kungfutrader Posted July 9, 2014 Report Share Posted July 9, 2014 (edited) Deleted, because I got it running. Made a mistake at installation Edited July 9, 2014 by kungfutrader Got it running Quote Link to comment Share on other sites More sharing options...
p3t3 Posted July 18, 2014 Report Share Posted July 18, 2014 Hi, RE: NT7 .22 Credits https://[email protected]/file/bsxggv https://[email protected]/file/1nl8l4 I don't use NT as I mentioned previously, but if you were able to produce the same screenshots in the downloads above, would this help? Thanks, p3t3. P.S. Sorry for delay, I have been busy with too many things. Quote Link to comment Share on other sites More sharing options...
⭐ santoshv2k Posted July 18, 2014 Report Share Posted July 18, 2014 Hi, RE: NT7 .22 Credits https://[email protected]/file/bsxggv https://[email protected]/file/1nl8l4 I don't use NT as I mentioned previously, but if you were able to produce the same screenshots in the downloads above, would this help? Thanks, p3t3. P.S. Sorry for delay, I have been busy with too many things. Plz share that nt emu Quote Link to comment Share on other sites More sharing options...
khnco Posted August 15, 2014 Report Share Posted August 15, 2014 Does anyone else get a "unable to establist connection to level II server" once or twice a week. I have been getting this error for couple months now and cant figure it out.. have to restart to fix it... Quote Link to comment Share on other sites More sharing options...
sepa Posted August 20, 2014 Report Share Posted August 20, 2014 Does anyone else get a "unable to establist connection to level II server" once or twice a week...QUOTE] I don't get the error message but my level II does drop out on some instruments from time to time. In earlier versions of NT, it seemed to be a bug in NT, but now I'm pretty sure it is the exchange or my broker's data feed playing up. If it is fixed by restarting though, it certainly looks like an NT problem, or perhaps the broker feed. Quote Link to comment Share on other sites More sharing options...
catspetsdogs Posted August 25, 2014 Report Share Posted August 25, 2014 for me credits for static Dom have stopped working. I tried on different computers with the same result. Nobody ran into this yet? Quote Link to comment Share on other sites More sharing options...
⭐ goldeneagle1 Posted September 17, 2014 Report Share Posted September 17, 2014 If anyone has release 23 or better, please upload. 23 has a CQG adapter fix. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
forexmaniac84 Posted September 19, 2014 Report Share Posted September 19, 2014 Anyone has the ninja version 22 stop working suddenly? They may detect the invalid license keys? Quote Link to comment Share on other sites More sharing options...
⭐ goldeneagle1 Posted September 19, 2014 Report Share Posted September 19, 2014 Who are "they"? Folks at NT? How would they know that you are using it? I guess the emu is supposed to trap all communications to NT folks... Is your emu working correctly? May be there is some backdoor that NT devs put in rel 22 for checking... Sorry I don't have rel 22 running to verify... Rgds. Quote Link to comment Share on other sites More sharing options...
dennyyusuf Posted September 19, 2014 Report Share Posted September 19, 2014 (edited) Anyone has the ninja version 22 stop working suddenly? They may detect the invalid license keys? Im using ninja ver 22 with CQG data provider, and it has been stopped transferring data since 2 days ago, dunno whts really going on.. My another problem using ninja ver 22 with CQG data provider is, mine "refresh historical data" is grayed out when doing a "right click" on a chart to refresh the data..dunno whts really going on, maybe historical data feed was down..?? Edited September 19, 2014 by dennyyusuf Quote Link to comment Share on other sites More sharing options...
forexmaniac84 Posted September 19, 2014 Report Share Posted September 19, 2014 Im using ninja ver 22 with CQG data provider, and it has been stopped transferring data since 2 days ago, dunno whts really going on.. My another problem using ninja ver 22 with CQG data provider is, mine "refresh historical data" is grayed out when doing a "right click" on a chart to refresh the data..dunno whts really going on, maybe historical data feed was down..?? I had the same problems as yours. No historical data for charts and the option " Reload all historical data" got grey out and cant be pressed.I think Ninja side knows we are using the same license and block it because When I use free Ninja version with CQG demo,there is no problem. So I think it is time to purchase the life-time license already Quote Link to comment Share on other sites More sharing options...
tomodej Posted September 19, 2014 Report Share Posted September 19, 2014 I had the same problems as yours. No historical data for charts and the option " Reload all historical data" got grey out and cant be pressed.I think Ninja side knows we are using the same license and block it because When I use free Ninja version with CQG demo,there is no problem. So I think it is time to purchase the life-time license already I was able to setup a trial data feed from iQFeed and the historical data wasnt greyed out ane everything was ok, Only had issue when using the AMP CQG connection maybe the folks at have an issue with their server. The iQFeed data loads fine. dennyyusuf 1 Quote Link to comment Share on other sites More sharing options...
tomodej Posted September 19, 2014 Report Share Posted September 19, 2014 I had the same problems as yours. No historical data for charts and the option " Reload all historical data" got grey out and cant be pressed.I think Ninja side knows we are using the same license and block it because When I use free Ninja version with CQG demo,there is no problem. So I think it is time to purchase the life-time license already I was able to setup a trial data feed from iQFeed and the historical data wasnt greyed out ane everything was ok, Only had issue when using the AMP CQG connection maybe the folks at have an issue with their server. The iQFeed data loads fine. Quote Link to comment Share on other sites More sharing options...
dennyyusuf Posted September 19, 2014 Report Share Posted September 19, 2014 @tomodej, Are u using ninja ver 22 with emu? If so, it means tht our current problem located in CQG historical data server. Quote Link to comment Share on other sites More sharing options...
tomodej Posted September 19, 2014 Report Share Posted September 19, 2014 @tomodej, Are u using ninja ver 22 with emu? If so, it means tht our current problem located in CQG historical data server. yes indeed @dennyyusuf. do you have a solution? Quote Link to comment Share on other sites More sharing options...
dennyyusuf Posted September 19, 2014 Report Share Posted September 19, 2014 (edited) Not yet my friend.. But at least the good news is our ninja still okay as u confirmed it too, so the problem lies in our data feed. I'll contact CQG client support and let me tell u if there's a chance to fix it. If anybody here has some prob and has managed it please let us here know it. Regards, Edited September 19, 2014 by dennyyusuf Quote Link to comment Share on other sites More sharing options...
forexmaniac84 Posted September 19, 2014 Report Share Posted September 19, 2014 (edited) I used Rithmic and CQG and can comfirm both have problem with ninja v22 and the emu.But when I dont use emu and use free license, CQG and Rithmic worked fine. I think IQ Feed works is because it is seperate feed.Ninjatrader side can control the CQG and Rithmic feed Edited September 19, 2014 by forexmaniac84 Quote Link to comment Share on other sites More sharing options...
Bend Posted September 19, 2014 Report Share Posted September 19, 2014 The same goes for FXCM data feed for Forex. Stopped working from Ninjaservers from yesterday, it works by loading history from its own server where if u ask more than half a day its so slow that its useless. (ie if you want to watch 4 to 5 instruments) Quote Link to comment Share on other sites More sharing options...
Bend Posted September 19, 2014 Report Share Posted September 19, 2014 I was playing around with my Virtual Workstation and through it it connects to ninja servers just fine. Just an observation. Quote Link to comment Share on other sites More sharing options...
dennyyusuf Posted September 19, 2014 Report Share Posted September 19, 2014 Still dont get any email reply from CQG support.. Is there any chance to get help from other ninja user here? Regards, Quote Link to comment Share on other sites More sharing options...
iksak Posted September 20, 2014 Report Share Posted September 20, 2014 Same problem. NT v22 with CQG stopped loading historical data. I hope it could be fixable. andyshooktrader and dennyyusuf 2 Quote Link to comment Share on other sites More sharing options...
dennyyusuf Posted September 22, 2014 Report Share Posted September 22, 2014 (edited) Same problem. NT v22 with CQG stopped loading historical data. I hope it could be fixable. Hi iksak, have u tried reseting instrument? to do this. Disconnect from any live data connection. Go to "Tools" and then "Options" and then select the "data" tab and click on "reset instruments" restart NT. After following the reset instruments instructions Try pulling up a chart and right click on your chart "reload all historical data". Let me know if this resolves this issues Regards, Edited September 22, 2014 by dennyyusuf iksak and andyshooktrader 2 Quote Link to comment Share on other sites More sharing options...
iksak Posted September 22, 2014 Report Share Posted September 22, 2014 Hi iksak, have u tried reseting instrument? to do this. Disconnect from any live data connection. Go to "Tools" and then "Options" and then select the "data" tab and click on "reset instruments" restart NT. After following the reset instruments instructions Try pulling up a chart and right click on your chart "reload all historical data". Let me know if this resolves this issues Regards, Hi denny and thanks for your answer. I tried to reset instrument but when I restart ninja the "reload all historical data" option is grey and not clickable. And no historical data are loaded. andyshooktrader 1 Quote Link to comment Share on other sites More sharing options...
dennyyusuf Posted September 22, 2014 Report Share Posted September 22, 2014 Hi denny and thanks for your answer. I tried to reset instrument but when I restart ninja the "reload all historical data" option is grey and not clickable. And no historical data are loaded. Yes iksak , mine is still the same with u, those instructons I got from CQG client support, and still no luck for us here. I dont know wht am I supposed to do to make this ninjatrader v22 working again.. Please help if other member know how to solve this problem. Regards. andyshooktrader 1 Quote Link to comment Share on other sites More sharing options...
andyshooktrader Posted September 22, 2014 Report Share Posted September 22, 2014 (edited) I had the same problem and I found a solution, it worked for me, I hope for you the result will be the same! 1) Close NT7 and lic_emu app 2) Go into NT7 license emu folder and delete app.config 3) Download this file and replace the old one in NT7 license emu folder: http://www.ninjatrader.com/NTConfig.xml 4) Restart NT7 http://i.gyazo.com/bfa474908678dd03893a66adf628044c.png Edited September 22, 2014 by andyshooktrader obfuscatethat, shickman, Bend and 6 others 9 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.