tradingsol Posted July 22, 2011 Report Posted July 22, 2011 http://update.tradestation.com/builds/9.00.00.8505/setup%20tradestation%209.0.exe Patch: http://www.multiupload.com/ZCOFCZXCM6 Enjoy................. eggzactly, Torres96, Aeddi and 14 others 17 Quote
grisleback Posted July 22, 2011 Report Posted July 22, 2011 (edited) Great share, Thanks! What kind of data can you use with this version? I take it the OwnData 2.7 wont work with it Edited July 22, 2011 by grisleback Quote
JimJamBonks Posted July 22, 2011 Report Posted July 22, 2011 Thanks - but I couldn't get it to work. It installed ok. After installation I stopped it doing the auto update and I replaced the 3 patch files but when it started up it just hung for a few seconds and then died. Did you do anything different to me? Quote
JimJamBonks Posted July 22, 2011 Report Posted July 22, 2011 Yeah - XP Pro here too. I also uninstalled and let it auto-update to the latest patch version but it did the same thing. Quote
tradingsol Posted July 22, 2011 Author Report Posted July 22, 2011 Try New Patch 100% Working http://www.multiupload.com/XLLF8U8RHF Aeddi, Phil Zimb, ylidor and 1 other 4 Quote
grisleback Posted July 22, 2011 Report Posted July 22, 2011 (edited) Try New Patch 100% Working http://www.multiupload.com/XLLF8U8RHF This new patch worked for me. What kind of data can you use and how do you get it to be recognized? Thanks again for the share! To bad someone couldn't make a program to use free MT4 data that could be read in TS. Edited July 23, 2011 by grisleback Quote
ebizpro Posted July 22, 2011 Report Posted July 22, 2011 Where do I put the misc.dat file? Thanks in Advance Quote
mashki Posted July 22, 2011 Report Posted July 22, 2011 Great share, Thanks! What kind of data can you use with this version? I take it the OwnData 2.7 wont work with it OwnData 3 is the third generation of unique software that allows you to use third-party data in TradeStation 8 and TradeStation 9 (build 8579) Quote
tradingsol Posted July 22, 2011 Author Report Posted July 22, 2011 Where do I put the misc.dat file? Thanks in Advance C:\Program Files\TradeStation 9.0\Program\ c: is were you installed Trade Station. ebizpro 1 Quote
⭐ kesk Posted July 26, 2011 Report Posted July 26, 2011 Didn't work on Win7 SP1..program just shuts down. Quote
wich Posted July 26, 2011 Report Posted July 26, 2011 thank you tradingsol for sharing good software hi all , after i ve tried to install its work but u need to let s tradestation auto update to ver 8816 (lasted version) and use its patch BTW , my concern is that if Tradestation website release newer version this patch will not work so can anyone shared tradestation setup.exe of ver 8816 thats will help when we re-install and auto update is not ver 8816 best regards Quote
doan1 Posted July 29, 2011 Report Posted July 29, 2011 I find the scanner in TS so powerful and want to make use of it. Could somebody help me how to use scanner with EOD data? Each time i start the scanner, it says "does not support in offline mode" Quote
Aeddi Posted August 13, 2011 Report Posted August 13, 2011 I am wondering what kind of data feed you guys use when there is no downloadable OwnData version for the TS 9.0? At least not yet I mean. Aeddi Quote
⭐ Apollo Posted August 15, 2011 Report Posted August 15, 2011 Testing 123… Have to reply again to get to this page, Ha! Quote
⭐ Apollo Posted August 15, 2011 Report Posted August 15, 2011 Hi! Yes, as Wich mentioned…you need to update to 8816 to make it work!!! Quote
⭐ Apollo Posted August 15, 2011 Report Posted August 15, 2011 Here is the update file-8816 for TS9.0_8505: http://www.mediafire.com/?pzjbq2w71gt7pol Aeddi, leeb77, taipan and 3 others 6 Quote
wang4871 Posted August 15, 2011 Report Posted August 15, 2011 grisleback, Tradestation, since version 8.1, can directly read the 3rd source data in ASCII and Metasock format. It is a built-in feature of TS. I have succeeded to read Metastock data and creat chart in off-line mode,, but failed to input ASCII data. if you can directly input ASCII data into TS9.0 there is no problem to use free MT4 data. Anyone has read ASCII data successfully ? Pls share the experience ! Quote
ngocleasing Posted August 16, 2011 Report Posted August 16, 2011 Could you tell me how to use scanner offline? Thanks you very much! Quote
grisleback Posted August 17, 2011 Report Posted August 17, 2011 grisleback, Tradestation, since version 8.1, can directly read the 3rd source data in ASCII and Metasock format. It is a built-in feature of TS. I have succeeded to read Metastock data and creat chart in off-line mode,, but failed to input ASCII data. if you can directly input ASCII data into TS9.0 there is no problem to use free MT4 data. Anyone has read ASCII data successfully ? Pls share the experience ! I said this before but if someone could develope a program that could convert free Forex data, say from a broker that supplies free demo accounts, and have it feed Tradestation. That would open up the use of Tradestation for just about everyone. My skills in that area are pretty much non-existant but you would think some sharp computer guy could do it. Quote
bobaloo Posted August 17, 2011 Report Posted August 17, 2011 3rd party data grisleback, Tradestation, since version 8.1, can directly read the 3rd source data in ASCII and Metasock format. It is a built-in feature of TS. I have succeeded to read Metastock data and creat chart in off-line mode,, but failed to input ASCII data. if you can directly input ASCII data into TS9.0 there is no problem to use free MT4 data. Anyone has read ASCII data successfully ? Pls share the experience ! Wang....you say that you can get Metastock data. I can't get either ASCI nor Metaslock. What prefix do you use? Also, under formating symbol it asks for exchange but it won't let me enter an exchange. If I'm using the S&P 500 stocks, am I going to have to enter an exchange of each stock? Any help would be appreciated. TIA Quote
sikandar Posted August 18, 2011 Report Posted August 18, 2011 Wang....you say that you can get Metastock data. I can't get either ASCI nor Metaslock. What prefix do you use? Also, under formating symbol it asks for exchange but it won't let me enter an exchange. If I'm using the S&P 500 stocks, am I going to have to enter an exchange of each stock? Any help would be appreciated. TIA you can make a custexch.txt file and type what ever exchange in CAL folder program files\tradestationxxx\CAL Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.