rob59 Posted September 6, 2010 Report Posted September 6, 2010 (edited) here is the restrictions removed dll http://www.mediafire.com/?t595dauiadz4i90 manual http://www.mediafire.com/?yt2e18tdv5z1dh4 Edited September 6, 2010 by rob59 stovedude, hawkfx and taipan 3 Quote
luigifunk Posted September 6, 2010 Report Posted September 6, 2010 here is the restrictions removed dll http://www.mediafire.com/?t595dauiadz4i90 manual http://www.mediafire.com/?yt2e18tdv5z1dh4 Thank you rob59 Quote
rob59 Posted September 6, 2010 Report Posted September 6, 2010 au/cad very safe ,between 2 and 5% monthly Quote
luigifunk Posted September 6, 2010 Report Posted September 6, 2010 au/cad very safe ,between 2 and 5% monthly with default parameters? Quote
rob59 Posted September 6, 2010 Report Posted September 6, 2010 yes . forward test results http://www.mediafire.com/?yhchin769x3u9hn live results http://www.myfxbook.com/members/PipStrider/pipstrider-live/34904 Quote
wareswaldo Posted October 12, 2010 Report Posted October 12, 2010 Version 1.24 out. Anybody have it? This EA is one of the few Martingales I have seen that I would even consider with live money... Quote
marc1713006104 Posted October 12, 2010 Report Posted October 12, 2010 i had this on a demo account everything was going good making money,i was just going to put on a live account then had some bad news out of canada,and over the following week got a margin call on the demo account. No way i will have this on a live account,be careful guys,opens bigger and bigger lot sizes and then you have a lot of dd....trust me......account no more.. Quote
wareswaldo Posted October 12, 2010 Report Posted October 12, 2010 It is a martingale, so by definition the lots get larger....using a minimum account balance of $50k and BalanceFactor=25,000 to =50,000 should be relatively safe and trades fairly easily through that rough patch in May using non-NFA/non-CFTC settings with the hedging functions. Quote
rob59 Posted October 16, 2010 Report Posted October 16, 2010 (edited) http://www.mediafire.com/?pdjsd724oqsq6st 1.22 ,done Edited October 27, 2010 by rob59 megatron1713006019 and taipan 2 Quote
rob59 Posted November 23, 2010 Report Posted November 23, 2010 (edited) http://www.mediafire.com/?64qq1336w4h5q88 5% monthly without adjusting the # of lots after the first 1000$ gain,it would have been much more than 5 ,average dd this setting is the right one Edited November 23, 2010 by rob59 Quote
rob59 Posted December 23, 2010 Report Posted December 23, 2010 (edited) 1.24 is different only by conforming to nfa rules i had it but lost it, no interest for non us traders Edited December 23, 2010 by rob59 Quote
Atlas1713006436 Posted December 23, 2010 Report Posted December 23, 2010 So basically this is a horrible Ea Correct? Quote
rob59 Posted December 24, 2010 Report Posted December 24, 2010 So basically this is a horrible Ea Correct? what do you mean? Quote
cnuse Posted December 30, 2010 Report Posted December 30, 2010 hi 1.26 is out now. If you have one, I can unblock the time limit. Quote
taipan Posted December 31, 2010 Report Posted December 31, 2010 hi 1.26 is out now. If you have one, I can unblock the time limit. I am also interested in this one, any body pls kindly share. Thanks in advance. Quote
vincent829 Posted December 31, 2010 Report Posted December 31, 2010 Pipstrider Original 1.26 Version: Version 1.26 A newer and more efficient function is now being used to determine if the trade context is busy, or if there are any other reasons why a trade cannot be opened before opening any trade. It replaces the old function for this purpose, and increases the efficiency of the trade opening process while decreasing the time that the EA waits for the needed trade opening environment. Download here: http://www.mediafire.com/?dwmv84c9dvppe1a taipan, megatron1713006019, cnuse and 2 others 5 Quote
taipan Posted December 31, 2010 Report Posted December 31, 2010 Vincent, Backtest on this version did not work, can some expert educated it. Thanks in advance. Quote
taipan Posted December 31, 2010 Report Posted December 31, 2010 I have used the previous pipstrider v1.22 educated dll with v1.26, it works. Quote
taipan Posted December 31, 2010 Report Posted December 31, 2010 here is the educated dll file educated and to be used with newer version v1.26. Back test did work. http://www.multiupload.com/D5QITDJZWO Do you own demo before using it. Thanks are welcome. pro, robotfx2, vincent829 and 2 others 5 Quote
cnuse Posted January 3, 2011 Report Posted January 3, 2011 hi, this is the edu version I made. I removed dll. Now one file is enough. It runs faster and easier to set up. Thanks for the Original! http://www.4shared.com/account/file/WlFENM3I/PipStriderEdu.html taipan, rob59, iliotest and 11 others 14 Quote
pro Posted January 4, 2011 Report Posted January 4, 2011 (edited) Can someone provide the manual plz? Got it. Thx. Edited January 5, 2011 by pro Got the manual... Quote
grooter Posted February 1, 2011 Report Posted February 1, 2011 Can you please post the manual? Can not find it anywhere... thanks! Quote
vincent829 Posted February 1, 2011 Report Posted February 1, 2011 Manual as per request. Thanks if you like it. :) http://www.mediafire.com/?p2ip5757a85v3t7 mkowa, indo37, junglist00 and 4 others 7 Quote
taipan Posted May 16, 2011 Report Posted May 16, 2011 New version of Pip_strider_v1_29: There is some improvement on how stealth mode works. http://www.multiupload.com/X3IWMFJLWC This is a demo version and so it only works on demo account. Cnuse or any experts, pls educate it to live account. Thanks. robotfx2 1 Quote
robotfx2 Posted May 17, 2011 Report Posted May 17, 2011 http://www.multiupload.com/X3IWMFJLWC anyone can educate this latest version of Pip_strider_v1_29 ?? thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.