micutzu Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a Hi All After check with real account don't have any trade order. OK Follow my instruction 1.Copy file inside the rar file to your MT4 folder. 2.Open EURUSD 5 minutes chart. 3.Load hirider template on your chart. 4.Ctr+B make sure your Objects list same as Correct_variable picture. 5.If you need to backtest must select the Visual mode and load hirider template on your chart. Good luck download link http://www.multiupload.com/LK0OKMMOFK password indo-investasi I need to sleep if you have question please post it here. no trade in backtesting Quote Link to comment Share on other sites More sharing options...
alvinl Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a no trade in backtesting Have you activated visual mode? Quote Link to comment Share on other sites More sharing options...
Cyrillic Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a I'm thinking uninstalling anti-virus software because it finds a trojan in the file you download kind of defeats the purpose, but than its just me... Quote [spoiler:26ukmy10]Never trust, never fear, never beg[/spoiler:26ukmy10] Link to comment Share on other sites More sharing options...
micutzu Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a Have you activated visual mode? yes Quote Link to comment Share on other sites More sharing options...
onemore Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a not working, for me at least. Quote Link to comment Share on other sites More sharing options...
micutzu Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a one year backtesting ... not even a trade! Quote Link to comment Share on other sites More sharing options...
Steveg Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a drab1: See topstep message on next page. I am not having difficulty with other robots. Quote Link to comment Share on other sites More sharing options...
novello Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a I don't understand why we have to use the templates, instead of a simple EA !! harsh124 in this thread several good decompiler that works perfectly for the HiRIDER dll have been posted. Since you are a good assembly language programmer and decompiler, can you crack the HiRIDEN.dll ? arthemis what is the reached point of your hard working? please update . We all wait your final educated version of this MT4 Expert Advisor. Quote Link to comment Share on other sites More sharing options...
monik7 Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a i am super nerd \m/ Quote Link to comment Share on other sites More sharing options...
bamik Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a one year back testing ... not even a trade! too me!!! :-? Quote Link to comment Share on other sites More sharing options...
0815 Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a fake did not work its only the template that provide that fusion hirider is running. Quote Link to comment Share on other sites More sharing options...
mopips Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a Not working in visual back test mode with tpl either. Log from Journal looks good, but no joy! Quote Link to comment Share on other sites More sharing options...
pachecus Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a got this: 16:19:39 HiRIDER_rev1 EURUSD.,M5: loaded successfully 16:19:39 HiRIDER_rev1 EURUSD.,M5 inputs: Ver.1.03="HiRIDER"; _1="System Parameters"; MagicNumber=1379; _2="Strategy Parameters"; Equitylimit=500; MaxTrades=10; Lots=0.01; UseMM=false; LotsRiskReductor=5; MaxLots=10; 16:19:39 HiRIDER_rev1 EURUSD.,M5: GetState(): 12 16:19:39 HiRIDER_rev1 EURUSD.,M5: gi_260: 16384 16:19:39 HiRIDER_rev1 EURUSD.,M5: gi_264: 0 16:19:39 HiRIDER_rev1 EURUSD.,M5: Authenticated 16:19:39 HiRIDER_rev1 EURUSD.,M5: gi_276: 1 16:19:39 HiRIDER_rev1 EURUSD.,M5: g_timeframe_380: 5 16:19:39 HiRIDER_rev1 EURUSD.,M5: initialized 16:34:56 HiRIDER_rev1 EURUSD.,M5: Error accessing RateInfo. Symbol = EURUSD. error(0) = no error 16:34:56 HiRIDER_rev1 EURUSD.,M5: Increment1,-1,-1,-1,-1,-1 Quote Link to comment Share on other sites More sharing options...
keesje1 Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a But it trades live, at least on a demo account. So joy for me i would say, let's see what this thing can do for us. Thanks to all who have contributed. Quote Link to comment Share on other sites More sharing options...
saly Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a guys still no one can crack fusion receipt number ???? Quote Link to comment Share on other sites More sharing options...
djmanu Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a Backtest is working thank you so much ! Looking forward for Fusion & LMD :) Quote Link to comment Share on other sites More sharing options...
keesje1 Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a And working fine in backtest here, too. Did nothing special though? Quote Link to comment Share on other sites More sharing options...
skorpi0wn Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a I think I was able to get the original copy working (not the educated one that doesn't seem to work). It's a little bit technical and complex, but here is what I did. 1) I have a web server setup and created a file at: http://www.URLNAME.com/access/frwc.php 2) In the frwc.php file I entered this number 35510265 3) Save and close the file 4) Open up your hosts file (C:\windows\system32\drivers\etc\hosts) in order to redirect to your web server 5) Add a line similar to mine: *.*.*.* http://www.forex-robot-world-cup.com where *.*.*.* is the IP address of your web server 6) Drop to DOS (START -> Run - cmd) 7) Type ipconfig /flushdns 8) Start Metatrader, load your EURUSD 5 min chart, load HiRider. It will fail to authenticate. 9) Push F7 and click OK. I'm not sure if this will work for you, but it's definitely working for me. Backtesting worked and live trading is working. Quote Link to comment Share on other sites More sharing options...
pachecus Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a I think I was able to get the original copy working (not the educated one that doesn't seem to work). It's a little bit technical and complex, but here is what I did. 1) I have a web server setup and created a file at: http://www.URLNAME.com/access/frwc.php 2) In the frwc.php file I entered this number 35510265 3) Save and close the file 4) Open up your hosts file (C:\windows\system32\drivers\etc\hosts) in order to redirect to your web server 5) Add a line similar to mine: *.*.*.* http://www.forex-robot-world-cup.com where *.*.*.* is the IP address of your web server 6) Drop to DOS (START -> Run - cmd) 7) Type ipconfig /flushdns 8) Start Metatrader, load your EURUSD 5 min chart, load HiRider. It will fail to authenticate. 9) Push F7 and click OK. I'm not sure if this will work for you, but it's definitely working for me. Backtesting worked and live trading is working. Did that and have same result, backtesting worked and live trading is working but not open any trades at my end, how about at yours? Quote Link to comment Share on other sites More sharing options...
mitch1713006137 Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a So it seems like the only thing it does is sending a check to a webpage? What I don't get is how the "fake" web server can get it to take trades though. I mean you are only telling it that the web page is at your local computer instead of the real server. Quote Link to comment Share on other sites More sharing options...
skorpi0wn Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a Did that and have same result, backtesting worked and live trading is working but not open any trades at my end, how about at yours? It opened up a trade for me right away like it mentions in the documentation. (If you install the .EXE file it will give you the PDF for instructions). It opened up two trades a buy and sell and cashes in if it hits 7 pips or loses 100. It hasn't done any of the other 4 strategies yet. I'm glad to hear it's working. I'm backtesting all of 2009 right now with this and will post results shortly. Quote Link to comment Share on other sites More sharing options...
skorpi0wn Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a So it seems like the only thing it does is sending a check to a webpage? What I don't get is how the "fake" web server can get it to take trades though. I mean you are only telling it that the web page is at your local computer instead of the real server. I've been out of the coding game for quite some time, but I thought I would take a shot. I think the software only connects to the server to check and make sure the software is valid. From what I could tell, it's just doing an authentication check using a combination of receipt number, account number, and possibly a date/time hash. I noticed that the mystery number (date/time) was always changing each time a request hit my webserver. For some reason, when you push F7 and hit OK, it always sent the same number to the server. That's why I think the 35510265 works every time. Quote Link to comment Share on other sites More sharing options...
onemore Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a I think I was able to get the original copy working (not the educated one that doesn't seem to work). It's a little bit technical and complex, but here is what I did. 1) I have a web server setup and created a file at: http://www.URLNAME.com/access/frwc.php 2) In the frwc.php file I entered this number 35510265 3) Save and close the file 4) Open up your hosts file (C:\windows\system32\drivers\etc\hosts) in order to redirect to your web server 5) Add a line similar to mine: *.*.*.* http://www.forex-robot-world-cup.com where *.*.*.* is the IP address of your web server 6) Drop to DOS (START -> Run - cmd) 7) Type ipconfig /flushdns 8) Start Metatrader, load your EURUSD 5 min chart, load HiRider. It will fail to authenticate. 9) Push F7 and click OK. I'm not sure if this will work for you, but it's definitely working for me. Backtesting worked and live trading is working. what do you use for creating a webserver? Quote Link to comment Share on other sites More sharing options...
mitch1713006137 Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a You can set it up with Apache. Just google it, there are a lot of easy tutorials on it. Great job skorpi0wn :-bd Quote Link to comment Share on other sites More sharing options...
skorpi0wn Posted February 17, 2010 Report Share Posted February 17, 2010 Re: Fusion v1.1a I backtested all of 2009 and got interesting results. 10k to 30k ain't bad at all. If this works for anyone else, or gives a jump off point to truly educating the software, kudos. Thanks http://www2.picturepush.com/photo/a/2944355/img/Anonymous/screenshot.jpg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.