Robominer

[xanlamin]

Re: ROBOMINER

 

john, can you educated the prospector ea as well? thanks! ^:)^

[masmin]

Re: ROBOMINER

 

I have made a backtest from 02.2008 - 08.2009 on audnzd, 0.1 lots fixed, 2000€ start balance. the account was wiped out on 10.2008 :-/

[john.maddog.doe]

Re: ROBOMINER

 

Educated Prospector: [url]http://www.forexsharing.com/147944[/url]

There were several of unused functions after decompile, and backtests of edu version are slightly different from original, so use with caution.

[xanlamin]

Re: ROBOMINER

 

john, thanks. i will post the backtest results shortly

[dawn09]

Re: ROBOMINER

 

-------------------------------

[sutanto]

Re: ROBOMINER

 

guys,

I found this link:hxxp://codebase.mql4.com/4100

 

EES hedger ,for everything reverse open position.

Maybe it is useful for start robominer from center area.Since it always moves upside down or vice versa.

[myffxdonos]

Re: ROBOMINER

 

had anybody the 2.17 or 2.18 version

[roberto59]

Re: ROBOMINER

 

http://www.mediafire.com/?m5my2ye54mg

 

no need to unlock the code @-)

[john.maddog.doe]

Re: ROBOMINER

 

Educated 2.17: [url]http://www.forexsharing.com/362310[/url]

[Ikhnaton]

Re: ROBOMINER

 

thanks :-bd

[rollover1713006058]

Re: ROBOMINER

 

guys,

I found this link:hxxp://codebase.mql4.com/4100

 

EES hedger ,for everything reverse open position.

Maybe it is useful for start robominer from center area.Since it always moves upside down or vice versa.

 

hi sutanto,

can u kindly explain how that works? i understand that it will open reverse position but how further will it do to turn or neutralize the losing trade..

im running ees but the market is relatively quiet as of now though

[sutanto]

Re: ROBOMINER

 

@ rollover.

For use EES hedger, it is the same as you open hedge (reverse position for robominer open position,for example if robo open buy, then hedger open sell (ignore the spread).

It will only works for hedge allowed broker like tadawulfx (it is free swap broker, unfortunately spread higher about 25 pips for AUDNZD and just 3 pips for EURCHF).

 

Since if it starts from center area,for example 1.1700 for AUDNZD, we might get high drawdown if the price goes to top or bottom (1.3000 or 1.0300 for AUDNZD,it will produce very high drawdown and may be take months to retrace to centre area again).To avoid this, just open reverse position from the centre area till 1/2 or 1/4 area from the center to top or bottom range.If robo open buy,then we add open sell, and robo drawdown for 1 range,we collect profit 1 range.So we collect pips and add the balance,not equity, and for this position,we have no real drawdown.Do it again till it reach 1/4 or 1/2 area from center to bottom or top.positive points from this, we add balance and equity if the price ranges at this area.we get pips from buy and sell position from robo and hedger.negative point if the price breaks this area and continue going to top or bottom,then we get drawdown from robo since robo's position still open,but we stop add position from hedger because if it reach top or bottom,hedger position will get drawdown if prices back to centre again.But we already collect some pips before just from hedger.IF you chane stoploss and take profit to zero from hedger till 1/4 or 1/2 area from center,it will reduce drawdown for robo,and it is useful for one who uses robominer if his balances less than developer recomendation (2000 usd for 0.01 mini lot),and he can play safer cause hedge position will eliminate margin and floating loss position except spread, with floating position still open.

What about if price almost reach top or bottom area?Since the pair will tend to goes back to center area,the more price left behind centre,the more pressure it will pullback,because AUD or NZD almost have same geography and they will always try to balance between them.I usually open martiangle position, because it will reduce highest or lowest robo position quicker than robo normally do.Please be careful with martiangle,just do it for nearest top or bottom.Other way,just hang on the position and change take profit higher than normally,for example change it to 100 from 40 or 50 (like robo developer recomendation from their forum).Other way, open prospector robot,with prospector lot recomendation for those fibo level, or you can open manual position refers to prospector lot recomendation (you can do it if still have much margin,but be careful if price continues to go to trend direction,be ready for hedge them by 1/3 amount for prospector lot).it will produce higher profit but higher risk.

 

Actually, very interesting to start robominer or prospector, if price near to bottom or top since it will just get little drawdown but with high winning probabilty.

I hope it will help.

[zynizen]

Re: ROBOMINER

 

What section of the code do I need to modify to change the T/P value from its 40 or 50 pips down to 25 or 30 pips?

My reasoning behind this, would be to lower the exposure in the market. This bot works extremely well, but, sometimes there are trades that last weeks or months. I am wondering if simply lowering the T/P value and increasing the lot size would make any sense or produce slightly higher %'age returns.

 

Thanks

[petewright]

Re: ROBOMINER

 

Hiya,

 

Anyone find Prospector EA?

The search function just doesn't seem to work properly since it has changed to google seach :(

 

Please provide me link if there is

 

thanks

[rollover1713006058]

Re: ROBOMINER

 

@ rollover.

For use EES hedger, it is the same as you open hedge (reverse position for robominer open position,for example if robo open buy, then hedger open sell (ignore the spread).

It will only works for hedge allowed broker like tadawulfx (it is free swap broker, unfortunately spread higher about 25 pips for AUDNZD and just 3 pips for EURCHF).

 

Since if it starts from center area,for example 1.1700 for AUDNZD, we might get high drawdown if the price goes to top or bottom (1.3000 or 1.0300 for AUDNZD,it will produce very high drawdown and may be take months to retrace to centre area again).To avoid this, just open reverse position from the centre area till 1/2 or 1/4 area from the center to top or bottom range.If robo open buy,then we add open sell, and robo drawdown for 1 range,we collect profit 1 range.So we collect pips and add the balance,not equity, and for this position,we have no real drawdown.Do it again till it reach 1/4 or 1/2 area from center to bottom or top.positive points from this, we add balance and equity if the price ranges at this area.we get pips from buy and sell position from robo and hedger.negative point if the price breaks this area and continue going to top or bottom,then we get drawdown from robo since robo's position still open,but we stop add position from hedger because if it reach top or bottom,hedger position will get drawdown if prices back to centre again.But we already collect some pips before just from hedger.IF you chane stoploss and take profit to zero from hedger till 1/4 or 1/2 area from center,it will reduce drawdown for robo,and it is useful for one who uses robominer if his balances less than developer recomendation (2000 usd for 0.01 mini lot),and he can play safer cause hedge position will eliminate margin and floating loss position except spread, with floating position still open.

What about if price almost reach top or bottom area?Since the pair will tend to goes back to center area,the more price left behind centre,the more pressure it will pullback,because AUD or NZD almost have same geography and they will always try to balance between them.I usually open martiangle position, because it will reduce highest or lowest robo position quicker than robo normally do.Please be careful with martiangle,just do it for nearest top or bottom.Other way,just hang on the position and change take profit higher than normally,for example change it to 100 from 40 or 50 (like robo developer recomendation from their forum).Other way, open prospector robot,with prospector lot recomendation for those fibo level, or you can open manual position refers to prospector lot recomendation (you can do it if still have much margin,but be careful if price continues to go to trend direction,be ready for hedge them by 1/3 amount for prospector lot).it will produce higher profit but higher risk.

 

Actually, very interesting to start robominer or prospector, if price near to bottom or top since it will just get little drawdown but with high winning probabilty.

I hope it will help.

 

thank you sutanto, interesting! im still a bit lost though on the 1/2 or 1/4 part and opening of hedge position/lot is it a 1(robo):1(ees hedge) ratio?

if theres a simple illustration i think it would be great, as i have been working on a hedging martingale ea, and reducing the losing trade lot is the key to win for position accumulating system.

[sutanto]

Re: ROBOMINER

 

@rollover

 

you can use hedge position/lot by ratio 1:1. I think it doesn't matter as long as you have enough margin.

Another way to maximaze profit for robominer is : you can change your robo magic number after 5 or more hanging position,it will not open new trade for old magic number, but it will make double profit since it will open new position based on new magic number and same grid.the old magic number,will close old position when the price take profit.It will not make much drawdown if the price goes againts you,it just double lot position at the grid that back againts you.You can do it to change again magic number after 5 or more new position since it always retrace.

 

For martiangle, please keep the initial lot position as small as possible.

Here I attach template and result that maybe useful for martiangle.Open position buy below white line,and sell above white line.Do nothing if the price between range the white line (first green line and first red line),since the price have no trend.

Template 60x90, means take profit 60 pips, and range grid 90 pips and you can triple your lot.I always close my position if it breakeven or small lost,not to take the profit,wheter is it still level 2, to maintain my margin, and take profit from another currency.You can use it manually for any currency you like, and look at the history on your chart by apply the template.

Remember to use very small initial lot,since it apply to multiple currency, but you just can use it for the number of currencies you like. The key is to be patient and wait for when the price hit green or red line.that chance of probabilty to retrace is high.And don't play it on times before and after the news for the currency, since every indicator and tecnical analysis fails for the news.

Here is the link.

 

 

 

hXXp://wXw.f@[email protected]/626149 for template

hXXp://wXw.f@[email protected]/28516 for tempoary result

[rollover1713006058]

Re: ROBOMINER

 

@rollover

 

you can use hedge position/lot by ratio 1:1. I think it doesn't matter as long as you have enough margin.

Another way to maximaze profit for robominer is : you can change your robo magic number after 5 or more hanging position,it will not open new trade for old magic number, but it will make double profit since it will open new position based on new magic number and same grid.the old magic number,will close old position when the price take profit.It will not make much drawdown if the price goes againts you,it just double lot position at the grid that back againts you.You can do it to change again magic number after 5 or more new position since it always retrace.

 

For martiangle, please keep the initial lot position as small as possible.

Here I attach template and result that maybe useful for martiangle.Open position buy below white line,and sell above white line.Do nothing if the price between range the white line (first green line and first red line),since the price have no trend.

Template 60x90, means take profit 60 pips, and range grid 90 pips and you can triple your lot.I always close my position if it breakeven or small lost,not to take the profit,wheter is it still level 2, to maintain my margin, and take profit from another currency.You can use it manually for any currency you like, and look at the history on your chart by apply the template.

Remember to use very small initial lot,since it apply to multiple currency, but you just can use it for the number of currencies you like. The key is to be patient and wait for when the price hit green or red line.that chance of probabilty to retrace is high.And don't play it on times before and after the news for the currency, since every indicator and tecnical analysis fails for the news.

Here is the link.

 

 

 

hXXp://wXw.f@[email protected]/626149 for template

hXXp://wXw.f@[email protected]/28516 for tempoary result

 

thanks sutanto :-bd

only problem now is it seems that i could never download from forexsharing though.. it always gives "Invalid Forex Sharing link." no matter which file i tried.. could you upload to 4sh@red or filef@ctory, they never gives me any problem. thanks a million! ^:)^

rollover

[sutanto]

Re: ROBOMINER

 

@ rollover,

Here is the link.

Use template on H 4 timeframe. It is safer.

 

 

 

 

hXXp://[email protected]/file/ah19ahe/n/60x90_blank_template_tpl

 

hXXp://[email protected]/file/ah19a8e/n/DetailedStatement_nanning_bob_htm

 

Update as 18 Aug 2009 :

 

hXXp://[email protected]/file/ah2bcgc/n/DetailedStatement_htm

 

Update as 20 Aug 2009 :

hXXp://[email protected]/file/ah22agh/n/DetailedStatement_htm, slowly but sure.

 

Update as 27 Aug 2009 :

hXXp://[email protected]/file/ah4abb4/n/DetailedStatement_htm

[xanlamin]

Re: ROBOMINER

 

Anybody know how to get robominer 2.1.7 to trade 0.01 lot?

[sedoley]

Re: ROBOMINER

 

Anyone please :-bd

[raikon]

Re: ROBOMINER

 

Anybody know how to get robominer 2.1.7 to trade 0.01 lot?

 

just put default. Don't change anything will do. \m/

[mulri]

GT shadow Key Gen.... please....!!

 

Here is the keygen - enjoy

 

//+------------------------------------------------------------------+

//| RoboMiner keygen.mq4 |

//+------------------------------------------------------------------+

.......

.......

+UnlockCode0904);

}

 

Hi,

 

Thanks for your wonderful robominer key gen mq4 file. I tried it with the latest original ex4 file downloaded from the original site's members area and Its working well for my live account. I am really pleasured to use the key gen file a wonderful tool.

 

I have latest original file of GT Shadow downloaded from the original site. I tried the robominer key gen file to get unlock code for GT shadow, but it failed.

 

Can you please write another key gen mq4 file for the original latest GT Shadow (version 4.12).

 

Since I just prefer to use the original file (uneducated raw version) with the unlock key instead of using an educated/cracked version, I am asking you this help.

 

Please... can you write a keygen mq4 file for the GT shadow 4.12.

 

Advance thanks....

[roberto59]

Re: ROBOMINER

 

http://www.mediafire.com/?0ddqziyyezq

 

was it what you meant ;)

[Kairos]

Re: ROBOMINER

 

Thanks for the template sutanto. I'm finding the 4H timeframe much better to trade on with this EA.

[sutanto]

Re: ROBOMINER

 

Thanks for the template sutanto. I'm finding the 4H timeframe much better to trade on with this EA.

 

Hi Kairos, you can learn more about that from this forum.Hope it helps.I use it on my live account.

 

hxxp://[email protected]/showthread.php?t=150293&page=165

 

hxxp://[email protected]/showthread.php?t=169309